The processes are intended to be applied to the design, installation and delivery of a tank installation for liquids and vapors. The process also includes maintenance of the refueling systems for liquids and vapors. Basically there is no lower or upper limit to the content of the tank installations that are installed according to this Evaluation Guideline. BRL SIKB 7800/BRL-K903 has a number of main and sub-areas as described below.

Main areas:

AInstallation and maintenance of underground tank installations for PGS-Class 1 and Class 2 products - PGS 28.
BInstallation and maintenance of underground tank installations for PGS-Class 3 and Class 4 products - PGS 28.
CInstallation and maintenance of underground tank installations for chemical products as defined in PGS 31.
DInstallation and maintenance of above ground tank installations for PGS-Class 3 and Class 4 products - PGS 30.
EInstallation and maintenance of above ground tank installations for PGS-Class 2
products - PGS 30.
FInstallation and maintenance of above ground tank installations for chemical products as defined in PGS 31.

Sub-areas:

1Determination of soil resistance and design of cathodic protection system (Mg-anode).  
2Pipes, underground with (semi) flexible plastic core.  
3Pipes, underground with (semi) flexible metallic core.  
4Leak detection systems for tank installations.  
5a) Electronic level gauging systems.
b) Electronic level monitoring measuring systems.  
6a) Steel pipes with welded joints.
b) Plastic pipes with welded joints.
7Pressure pipes underground.  
8Pressure pipes above ground.
9Design of tank installation in the (petro)chemical industry.
10Tank installations in a terp (semi) underground building.
11a) Fabrication of steel fill point spill containers.
b) Fabrication of plastic fill point spill containers.
12Underground tanks of Glass-reinforced plastic (GRP).
13Pipes, underground of Glass-reinforced expoxy (GRE).
14Tank installations in a pontoon.
15(Re)classification of steel installations.
16(Re)classification of plastic installations.
17Installation of underground pipes of various materials for main areas D, E and F.

As of June 1, 2017 Kiwa has transferred its role as manager of BRL SIKB 7800/BRL-K903 for the design, installation, repair and delivery of refueling systems to SIKB. This transfer took place at the request of various parties involved, in particular clients, the Dutch tank installers association (VTI) and UNiK (formerly Polyplast). With this, parties involved want to emphasize the importance of independent management of this national applicable guideline.

For whom?

Tank installers of tank installations for flammable liquids and chemicals.

When is it necessary?

Companies falling under the Dutch "Activiteitenbesluit" (Activities Decree) are legally obliged to have their underground and above ground tank installations for the storage of chemicals and liquid fuels installed under installation certificate by a BRL SIKB 7800/BRL-K903 certified tank installer. A certified tank installer must install the tank installation in accordance with the requirements of the BRL SIKB 7800/BRL-K903 (and possibly an approved RI&E) before an installation certificate according to BRL SIKB 7800/BRL-K903 can be issued. The storage tanks, spill containers, appendages, pipes, etc. for the storage of liquid fuels and chemicals will be part of this RI&E.

BRL SIKB 7800/BRL-K903 sets general rules for building a "basic" tank installation, so the preparation of RI&E is not necessary in most cases. When building a chemical tank installation, people are obliged to work according to the RI&E.

Interested?

If you are interested in certification, please complete the application form. If you have any questions, please contact our sales office.


Note: This Evaluation Guideline is only available in Dutch.