Security products

The EN 50130-5 European Standard specifies environmental test methods to be used for testing the system components of the following (fire) alarm systems, intended for use in and around buildings in residential, commercial, light industrial and ind...

The EN 50131-5-3 standard applies to intrusion alarm equipment using radio frequency (RF) links and located on protected premises. The EN 50131-5-3 standard defines the terms used in the field of intrusion alarm equipment using radio frequency links as we...

The EN 50136-2 standard is applicable for Supervised Premises Transciever. This European Standard specifies the general equipment requirements for the performance, reliability, resilience, security and safety characteristics of supervised premises...

The T 031 consists of the general requirements for testing security products including its requirements of the EN 50131. This technical note is intended to check the requirements of the EN 50131 series completely and in this technical note additional requ...

The EN 50131-3 standard is applicable for Control and Indicating Equipment , think of a Control panel, keypad and/ or keyfob and expanders. These products will be used as part of intrusion alarm systems installed in buildings.

The EN 50131-2-6 standard is applicable for magnetic opening contacts. This product will be used as part of intrusion alarm systems installed in buildings. The main standard is the EN 50131-2-6 for wired devices and for wireless devices the additional sta...

The EN 50131-2-3 standard is applicable for microwave detectors. This product will be used as part of intrusion alarm systems installed in buildings. The main standard is the EN 50131-2-3 for wired devices and for wireless devices the additional standard ...

The EN 50131-2-4 standard is applicable for combined passive infrared and microwave detectors. This product will be used as part of intrusion alarm systems installed in buildings. The main standard is the EN 50131-2-4 for wired devices and for wireless de...

The EN 50131-2-2 standard is applicable for passive infrared detectors. This product will be used as part of intrusion alarm systems installed in buildings. The main standard is the EN 50131-2-2 for wired devices and for wireless devices the additional st...

The EN 50131-6 standard is applicable for power supplies. This product will be used as part of intrusion alarm systems installed in buildings. The power supply shall either be an integral part of an intrusion alarm system component or stand-alone.

The EN 50131-4 standard is applicable for Warning devices. This is a device that gives an audible alarm in response to a notification warning device and may also provide alert indications.

Manufacturers who want to introduce security equipment on the Swedish market must ensure that their products have been tested according to the Swedish standard SSF 1014 and certified by the Swedish certification authority Svensk Brand- och SäkerhetsCertif...

The EMC product family standard, EN 50130-4, for immunity requirements, applies to the components of (fire) alarm systems, intended for use in and around buildings in residential, commercial, light industrial and industrial environments.

The Alarm Components Scheme certifies that an electronical security product complies with the technical product standards, needed for market access in various countries inside the European Union.