Utilities

Kiwa provides a wide range of services to manufacturers and service providers in the utilities sector, especially in the gas and drinking water sectors. We are experts in gases and support you in transitioning from fossil energy to solar and wind energy, as well as in the transportation and utilization of energy and water.

  • Expert in gas and tap water sector
  • Wide variety of consultancy and inspection services
  • Provide assurance
Filters
Service
Market
Services (193 results)
NIS2 in Europe
NIS2 European Cybersecurity Directive

Cybersecurity remains a hot topic, not only due to the increasing number of hacks and ransomware attacks but also from the perspective of regulators and the evolving legal framework in this area. European member states are currently preparing for the transposition of the Network and Information Security Directive 2 (NIS2) into national legislation.

Read more
Rubber rings
Drinking Water Materials Testing – BS 6920

BS 6920 is a requirement for manufacturers and suppliers of non-metallic materials/products that are used in contact with drinking water.

Read more
Skydivers in a circle
Shower hoses for sanitary tapware (BRL-K668)

The shower hoses may be used in tap water installations with a maximum working pressure of 1000 kPa. The recommended limits for correct operation are a dynamic pressure between 100 kPa and 500 kPa and a water temperature of maximum 65°C. Occasiona...

Read more
Water flow
Steel pipes for the transport of drinking water (BRL-K762)

The products are intended to be used for the transport of drinking water and a working pressure of 1MPa (1,000 kPa), with a water temperature up to 65˚C and a maximum water temperature up to 90˚C for a period of maximum 1 hour.

Read more
Pipe connection
Plastics piping systems for the supply of gaseous fuels – Polyethylene (PE) – Fittings

This approval requirement specify the requirements for fusion fittings made of polyethylene (PE) as well as of mechanical fittings for use in plastic piping systems for the supply of gaseous fuels of the 2nd and 3rd family according to EN 437 with a maximum operating pressure of 10 bar at a reference temperature of 20°C. The operating temperature is between -20 ˚C and 40 ˚C.

Read more
Gas installation
Gas pressure regulators, gas leak protectors and combination regulators

The products are intended to be used as gas pressure regulators, gas leak protectors and gas pressure regulators combined with gas leak protectors for domestic installations with a capacity up to 10 m3 and an inlet pressure (MOPu) up to 200 mbar a...

Read more
Plastic pipes
Polyethylene (PE) valves for plastic piping systems for the supply of gaseous fuels

Polyethylene (PE) valves for plastic piping systems for the supply of gaseous fuels AR 136

Read more
Plastic pipes
Self-closing gas valves

Self-closing gas valves AR 168

Read more
Bar installation
Flexible hose assemblies

This approval requirement describes the requirements with regard to flexible hose assemblies for use in installations for natural gas with a pressure of no more than 200 mbar in accordance with the NPR 3378-11 Code of Practice

Read more
Skydivers in a circle
Domestic Water Safety

The quality of our drinking water is a matter that concerns us all. To prevent the pollution of drinking water it is essential for appliances (such as washing machines and dishwaters) to have internal backflow protection.  With the Kiwa Domes...

Read more
Skydivers in a circle
BRL-K656: Heat exchangers intended for the indirect adjustment of drinking water

The products are intended to be used in in hot water installations with a working pressure of maximum.1 MPa (10 bar) and a water temperature of maximum 90 °C.

Read more
Skydivers in a circle
Deze BRL is per 1 maart 2019 ingetrokken en ondergebracht in BRL-K767.

Deze BRL is per 1 maart 2019 ingetrokken en ondergebracht in BRL-K767.

Read more
Skydivers in a circle
BRL K536-G Plastic piping systems of PE-RT/Al for hot and cold drinking water

The products according BRL K536 G are applicable for piping systems distribution systems for hot and cold drinking water at a design (working) overpressure of 8 or 10 bar according the temperature profile table 1.

Read more
People are skydiving
BRL K17102 PE piping systems with an plastic barrier layer for drinking water in polluted soil

The objective of this guideline is to guarantee the drinking water quality by specific relevant additional testing and criteria on the barrier properties of the piping system for an operation period of 50 years in polluted soil.

Read more
Research word web
Accidents and Incidents Analysis

The independent investigation of incidents enables them to be used objectively as lessons to be learnt for the future. By learning from incidents, the correct measures can be taken to reduce these. For gas network operators in the Netherlands, Kiwa Technology provides a call-out service that can be reached 24/7.

Read more
Laptop with grafic network on it
Discover Irene Pro

Irene Pro is a comprehensive and user-friendly analysis and calculation solution for gas networks. Developed by Kiwa, Irene Pro serves as an essential tool for numerous network operators in the construction, management and maintenance of gas networks.

Read more
Lab Kiwa
Permeation and chemical compatibility

Kiwa is your partner for assessing the chemical compatibility and material performance of applied materials and the corresponding tests like permeation, immersion or rapid gas decompression tests. Testing material samples, pipes, components or even complete systems is possible.

Read more
Gas and water heat research
Replacement and maintenance strategies

Replacement and maintenance strategies - This is a costly and time-consuming operation, which means it is important to make clear choices about which sections it would be best to replace within which period of time. Kiwa Technology can advise you.

Read more
Auditor in field of wind energy windmill
ISO 50001 Energy Management

ISO 50001 Energy Management system certification with Kiwa: conserve resources, save money and mitigate climate change.

Read more
Skydivers in a circle
BRL K17605 GRP Polyester Piping systems for water

The products are intended to be used for underground piping systems and its components made from glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) intended to be used for water supply (drinking or raw), with or without pressure.

Read more
Legionella prevention water installation
Sanitary Tapware; single taps and mixer taps (BRL-K652)

The sanitary tapware " single taps and mixer taps " are intended for application in drinking water installations with a static water pressure of maximum 1000 kPa and a maximum water temperature of 90°C. The recommended limits for correct operation...

Read more
FROSIO
External coatings for the corrosion protection of buried or immersed pipelines and joints

External coatings for the corrosion protection of buried or immersed pipelines and joints AR 87

Read more
Gas installation
POM gate valves installed in underground PE pipelines

POM gate valves installed in underground PE pipelines AR 137

Read more
Threaded pipes
External PE coating of steel pipes and fittings for buried pipelines

External PE coating of steel pipes and fittings for buried pipelines AR 50

Read more