Kiwa inspects all kinds of pressurized equipment, from small measuring devices to powerful pressure vessels. We do inspections at every level, ranging from design review, installation, manufacturing, modernization, maintenance and in-service inspections.

An automatic sprinkler system must have a reliable pipe system for optimal operation. An internal Inspection of Sprinkler System Piping will give you an insight into the current condition of your sprinkler system.

Pressure equipment with a pressure higher than 0,5 bar excluding: distribution networks, aerosols, machines covered by the Machine Directive, equipment for nuclear use, wellhead for controlling equipment, blast furnace(s), bottles or cans for carb...

Periodical Control Services with Kiwa: Ensure safe working conditions by ensuring compliance with Occupational Health and Safety laws.

Check if quality demands are being met with non-destructive testing. Or use NDT testing as part of in-service inspections or preventive maintenance to quantify the status of critical components and equipment.

During the operational stage of pressure equipment it can occur that a pressure device requires modifications. In that case, the user needs to take necessary measures regarding the modifications to the pressure equipment.

Compression fittings clamping device

An (initial or re-) evaluation for commissioning is executed prior to initial commissioning of the new pressure equipment and if required prior to renewed commissioning of existing pressure equipment. A change in location of the equipment, a chang...

Initial evaluation

Kiwa offers manufacturers of components for automotive vehicles using compressed natural gas (CNG) testing and certification services of automotive components for LPG, CNG, LNG and hydrogen sectors, as well as electromagnetic compatibility and several cli...

We provide quality management, specification and safety life cycle management services for safety automation, instrumentation and safety systems.

During the operational stage of pressure equipment it can occur that a pressure device requires repairs or modifications. In that case, the user needs to take necessary measures regarding the repairs and modifications to the pressure equipment.

EEMUA 159 – Inspection, maintenance and repair of above ground flat bottomed storage tanks.

EN 14015 – Inspection and assessment of design and manufacturing of site built, vertical, cylindrical, flat-bottomed, above ground, welded, steel tanks.

The quality of aggregates and fillers is defined in the product standards EN 12620 (concrete), EN 13043 (asphalt), EN 13242 (unbound and hydraulically bound building materials) or EN 13383-1 (armour stone) depending on the field of application. Kiwa test...

Kiwa offers an assessment of pressure equipment manufactured for the European market according to PED 2014/68/EU.