Electrical Safety Testing
Receive a quote tailored to your needs
Testing for Product Electrical Safety
Electrical safety testing verifies that your product is electrically and mechanically safe, meeting applicable international standards and market regulations. For radio-enabled products under RED, safety requirements must also be met. Evidence from UKAS-accredited testing and CB Scheme reports supports national certifications and UKCA/CE and global conformity.
Examples of markets & certifications supported:
UK & EU:
-
UKCA: The Electrical Equipment (Safety) Regulations
-
CE: Low Voltage Directive (LVD 2014/35/EU) (drop down with further information below)
The Low Voltage Directive (LVD) 2014/35/ EU is related to the safety of electrical equipment and issued by the European Union (EU). For manufacturers and distributors, who want to sell their electrical equipment in the EU, it is mandatory their product is compliant to the LVD. When the testing, documentation and certification has been completed, a CE mark can be applied on their product. Without the CE Mark it is not possible to legally enter the European market. The testing and evaluation services of electrical products conducted by Kiwa according to applicable product standards which are aimed at manufacturers of multiple types of appliances and consumer goods, including:
-
Appliances for domestic and similar use
-
Information Technology and office equipment
-
Electrical equipment for measurement, control and for use in the laboratory
-
Automatic electrical command and control devices
-
Static Uninterruptible Power Systems (UPS)
-
Lighting fixtures
-
Associated machines and panels
-
Electric toys
-
IECEE CB Scheme: CB Test Report & Certificate for global acceptance (drop down with further information below)
At KEC, we provide comprehensive safety assessments under the IECEE CB Scheme, helping manufacturers achieve international compliance with confidence. This globally recognised system enables mutual acceptance of test reports and certificates, streamlining access to markets worldwide.
Our CB Scheme Testing Covers:
HOUS – Household appliances, electrical tools, and similar equipment (IEC 60335-1)
ITAV – Audio/video, information and communication technology equipment (IEC 62368-1)
MEAS – Electrical equipment for measurement, control, and laboratory use (IEC 61010-1)
These primary safety standards complement our UKAS accreditation and EMC/radio testing services, ensuring a complete solution for your product certification needs.
CB Scheme Benefits for Manufacturers:
-
Complete testing solution for international product safety
-
Recognition of test reports for national certification in CB Scheme member countries
-
Potential acceptance by many non-member countries
-
Faster, streamlined certification process
-
Reduced overall costs for manufacturers
USA / Canada:
Supports national certifications when combined with EMC/Radio evidence
Australia & New Zealand:
Recognition pathways via CB Scheme and local requirements
Our Testing Process
How Electrical Safety Testing Works
Scope & Pre-Assessment
Pre-Compliance
Formal Testing
Remediation
Documentation
Global Extensions
Why Choose Kiwa Electrical Compliance?
Our customer-centric approach and integrated capabilities across Safety, EMC and Radio help you achieve compliance efficiently:
A relationship-led partner
Transparent guidance from concept to certification.Depth across Safety, EMC and Radio
Integrated programmes reduce timelines and cost.UKAS Accredited facilities
Lab No. 2360 and Lab No. 2667 to ISO 17025:2017.Fast-track options
Fast-track options and tailored test programs for different budgets.30+ years’ experience
30+ years’ experience across two established laboratories.Electrical Safety Services We Offer
Pre-Compliance & Design-Stage Support
• Identification of safety-critical components and change-control strategy
• Gap analysis to applicable standards (IEC 62368-1, IEC 61010-1, IEC 60335-1)
• Pre-tests and targeted guidance to reduce re-engineering risk
• Documentation mapping for technical files (DoC, standards list, photo log)
Accredited Electrical Safety Testing
• UKAS-accredited safety testing for HOUS, ITAV and MEAS categories
• Combined programmes for Safety, EMC and Radio testing where applicable
• Type Testing
• Climatic chamber to support testing of very large devices
Common electrical safety tests:
-
Glow wire
-
Input current/power
-
Insulation resistance
-
Dielectric strength
-
Touch current and earth leakage
-
Earth bond
-
Plug pin discharge
-
Mechanical strength
-
Fault conditions
-
Temperature testing
-
Impact testing
-
Electric strength
-
Creepage and clearance distances
The laboratory is also capable of carrying out long term humidity testing of appliances using an on-site 7.5m3 climatic chamber. This is especially useful for gaming machines, vending machines and other very large appliances.
LVD testing is carried out to applicable product standards, and typically includes assessments of the instructions, construction, circuit boards, insulation, flammability and abnormal fault conditions. Additionally, consideration is given to the IP rating.
Safety standards:
We are a UKAS accredited testing laboratory (No. 2667) to safety test the following products: (drop down list)
-
EN 60335-2-08: Shavers and hair clippers
-
EN 60335-2-21: Storage water heaters
-
EN 60335-2-23: Appliances for skin or hair care
-
EN 60335-2-30: Room heaters
-
EN 60335-2-40: Heat exchangers and thermoelectric coolers (non-refrigerant type) only
-
EN 60335-2-41: Pumps (NEW)
-
EN 60335-2-59: Insect killers
-
EN 60335-2-73: Fixed immersion heaters
-
EN 60335-2-75: Commercial dispensing appliances and vending machines
-
EN 60335-2-80: Fans
-
EN 60335-2-82: Amusement and personal services machines
-
EN 60335-2-102: Gas, oil and solid-fuel burning appliances having electrical connections ideally at the development stage of new electrical products.
-
EN 61010-1: Measurement, control, and laboratory equipment
-
EN 62368-1: Audio/video and information & communication technology equipment
CB Scheme (CBTL) Support
-
CB Test Reports (CBTR) and Certificates for acceptance across IECEE member countries
-
Streamlined national certifications and potential recognition in non-member markets
-
Cost and time reduction via mutual acceptance of test evidence
Who We Work With
Product Managers and Product Engineers – faster routes to market
Compliance Managers and Compliance Engineers – audited, accredited evidence
Design Engineers – practical guidance on safety-critical design
Quality Managers – robust documentation for regulators
Procurement Leads – reduced risk when sourcing compliant components
Business Benefits
Why Electrical Safety Testing Matters
Accelerated market access through integrated programmes
Reduced redesign risk
Evidence-ready documentation
Operational efficiency
Confidence
FAQs
Which safety standards apply to my product?
This depends on the product category and markets. We can assist in mapping your product to applicable standards (e.g., IEC 62368-1, 61010-1, 60335-1) during pre-assessment.
Can KEC fast-track my project?
Yes – fast-track options are available across Safety, EMC and Radio to meet tight launch timelines.
Can you combine Safety with EMC/Radio?
Absolutely. Integrated programmes minimise cost/time and simplify documentation for CE/UKCA and global approvals.
Do you support CB Scheme certification?
Yes – as part of Kiwa Group, KEC operates within the IECEE CB Scheme (CBTL), providing CB Test Reports and Certificates to streamline national certifications.
Where are tests performed?
At our UK facilities in Blackwood and Brentwood, with on-site options for large or high-current devices.
Your trusted partner for streamlined safety testing and market access.
Supporting your compliance journey with expert, tailored solutions from Kiwa Electrical Compliance.
