KOMO Certification and Testing of Plastics Piping Products for Sewerage Systems
Receive a quote tailored to your needs
Who is KOMO product certification and testing for?
The KOMO product certificate for sewerage systems is relevant for contractors, installers, plumbers and architects and anyone working for a government or housing association involved in sewerage system activities.
Either you’ll want to work with certified products or, as a certificate holder you’ll want to demonstrate to your customers that an expert independent organization supervises the production process of the certificate holder, the quality of the product and the quality assurance thereof.
About KOMO product certification and testing
Certification of plastic piping products for sewerage systems with the KOMO qualilty mark guarantees compliance with the requirements of Dutch standards for products for the building and infrastructure sector. The guaranteed lifetime of the KOMO certified plastic piping systems for sewerage is at least 50 years. KOMO mark testing demonstrates compliance to national and international product standards.
KOMO certification evaluation guidelines
Contact our certification experts in this area to study your question and work with you to find the right solution to obtain the KOMO quality mark in accordance with the Kiwa assessment guideline.
Indoor sewerage
Pipes and fittings for plastic piping systems for indoor non-pressure sewerage made of PE (BRL 2006)
KOMO certification according to the Kiwa evaluation guideline BRL 2006 applies to PE pipes and fittings for non-pressure indoor sewerage systems. Products with a nominal outside diameter ranging from 110 mm to 200 mm may also be applied in underground external sewerage systems.
Expansion pieces made of PVC and ABS (BRL 2007)
KOMO certification according to the Kiwa evaluation guideline BRL 2007 applies to expansion pieces made of PVC and ABS for indoor sewerage systems.
Structured-wall pipes made of PVC-U or PP for indoor non-pressure sewerage (BRL 2023)
KOMO certification according to the Kiwa evaluation guideline BRL 2023 applies to pipes and fittings with a structured wall, made of PVC-U or PP, for indoor non-pressure sewerage systems. Products with a nominal outside diameter ranging from 110 mm to 200 mm may also be applied in underground external sewerage systems.
Pipes and fittings made of PP for indoor non-pressure sewerage (BRL 2042)
KOMO certification according to the Kiwa evaluation guideline BRL 2042 applies to pipes and fittings made of polypropylene (copolymer) for indoor non-pressure sewerage systems. Products with a nominal outside diameter ranging from 110 mm to 200 mm may also be applied in underground external sewerage systems under lighter load conditions.
Toilet drain sleeves made of plastic (BRL 2050)
KOMO certification according to the Kiwa evaluation guideline BRL 2050 applies to sleeves made of ethylene-vinyl acetate (EVA) for use in connections of toilet bowls in indoor sewerage systems according to NEN-EN 33. The discharge side of the sleeve is connected to plastic pipes in accordance with NEN-EN 1329-1, NEN-EN 1451-1, NEN-EN 1455-1 and NEN-EN 1519-1. If rubber sealing rings are used, they must comply with BRL 2013 or BRL 2020.
Plastic pipe and fittings made of PVC-U for indoor non-pressure sewerage systems (BRL 52100)
KOMO certification according to the Kiwa evaluation guideline BRL 52100 applies to pipes and fittings made of PVC-U for indoor non-pressure sewerage systems. These products may be applied above ground within a building, as well as in underground applications under the building and up to 1 meter outside the building.
Odor traps
Odor traps and accessories made of plastic (BRL 2008)
KOMO certification according to the Kiwa evaluation guideline BRL 2008 applies to plastic odor traps and accessories intended for use in the drainage systems of washbasins, sinks, baths and other household appliances.
Shower drains and gutters with a waterless odor trap (BRL 5223)
KOMO certification according to the Kiwa evaluation guideline BRL 5223 applies to shower drains and gutters for the collection and/or transport of household wastewater to a sewerage system, where odor closure is ensured without a water seal.
Outdoor
Sewer pressure pipes made of PVC (BRL 2009)
KOMO certification according to the Kiwa evaluation guideline BRL 2009 applies to sewer pressure pipes made of unplasticized PVC (PVC-U) and biaxially oriented PVC (PVC-O). These pipes are intended for use in situations where increased reliability is required, such as in water management works and under extreme conditions, including high pressures up to 25 bar.
Pipes and fittings made of PVC-U for external rainwater drainage (BRL 2011)
KOMO certification according to the Kiwa evaluation guideline BRL 2011 applies to PVC-U pipes and fittings for external rainwater drainage systems.
Thermoplastic synthetic wells for sewer systems (BRL 2017)
KOMO certification according to the Kiwa evaluation guideline BRL 2017 applies to thermoplastic plastic wells intended for use under the following conditions:
- In piping systems for the transport of water or domestic wastewater under gravity, in accordance with EN 476, or as a housing for a pump in a pressure sewer system.
- Traffic loads up to and including class D400, in accordance with NEN-EN 124.
- A maximum depth of connecting pipes to the well bottom of 5 metres below ground level.
- A maximum groundwater level of 0.5 metres below ground level.
Gullies made of plastic (BRL 2021)
KOMO certification according to the Kiwa evaluation guideline BRL 2021 applies to gullies intended for the collection and discharge of rainwater from paved surfaces. Examples include street gullies, sidewalk gullies and combined street-sidewalk gullies.
Mechanical saddles made of PVC U, PP and PE for non pressure underground drainage and sewerage systems – Specific requirements (BRL 2022)
KOMO certified mechanical saddles, assessed in accordance with the Kiwa evaluation guideline BRL 2022, are suitable for application in non pressure underground drainage and sewerage systems.
The evaluation guideline BRL 2022 defines the certification scheme for mechanical saddles made of PVC U, PP and PE intended for use in non pressure underground drainage and sewerage systems.
Products for PE and PVC-U rainwater drainage systems based on complete filling (BRL 5215)
KOMO certification according to the Kiwa evaluation guideline BRL 5215 applies to systems for the drainage of rainwater based on complete filling. These systems are used for indoor applications, where rainwater is collected in fully filled downpipes, creating underpressure that enables the discharge of rainwater. The required discharge capacity is determined in accordance with NEN 3215. At low loads, the system functions as a traditional non-pressure rainwater drainage system.
Cast-in and push-in sockets made of PVC-U and ABS (BRL 9206)
KOMO quality declaration under Kiwa evaluation guideline BRL 9206 applies to PVC-U and ABS cast-in and push-in sockets. This mainly concerns application in vertical connections of concrete pipes with plastic standpipes with a nominal outside diameter of 110 to 200 mm. This also applies to sockets for horizontal connections in concrete wells where the connecting pipe has a diameter from the range of 110 to 630 mm.
Pipes and fittings with a structured wall for external non-pressure sewerage Type A: PVC-U and PP (BRL 9208-1)
KOMO certification according to the Kiwa evaluation guideline BRL 9208-1 applies to pipes and fittings with a structured (ribbed) wall for external non-pressure sewerage systems (Type A), made of PVC-U and PP.
This applies to:
- Underground applications located more than 1 metre from the building.
- Underground applications under the building and up to 1 metre outside the building.
Pipes and fittings with structured wall for external non-pressure sewerage Type B: PP and PE (BRL 9208-2)
KOMO certification according to the Kiwa evaluation guideline BRL 9208-2 applies to pipes and fittings with a structured (ribbed) wall for external non-pressure sewerage systems (Type B), made of PP and PE.
This applies to:
- Underground applications located more than 1 metre from the building.
- Underground applications under the building and up to 1 metre outside the building, including drainage systems subject to ground forces and hot water discharges.
Plastic piping systems made of PVC-U for external non-pressure sewerage (BRL 52200)
KOMO certification according to the Kiwa evaluation guideline BRL 52200 applies to plastic piping systems made of PVC-U for external non-pressure sewerage. These systems are used for underground applications under the building and up to 1 metre outside the building. Influences such as ground forces and the discharge of hot water are taken into account.
Plastic piping systems made of PP for external non-pressure sewerage (BRL 52202)
KOMO certification according to the Kiwa evaluation guideline BRL 52202 applies to plastic piping systems made of PP for external non-pressure sewerage. These systems are used for underground applications under the building and up to 1 metre outside the building. Influences such as ground forces and the discharge of hot water are taken into account.
Pipes for PE pressure pipe systems for external sewerage – Specific requirements (BRL 52203)
KOMO certification according to the Kiwa evaluation guideline BRL 52203 applies to pipes for PE pressure piping systems for external sewerage. These pipes are intended for both underground and above-ground applications. They may also be used in vacuum discharge systems.
Glass fiber reinforced polyester piping systems with wrapped tubes (BRL 52204)
KOMO certification according to the Kiwa evaluation guideline BRL 52204 applies to underground piping systems for drainage and/or sewerage made of glass fiber reinforced thermosetting plastics based on unsaturated polyester resin (UP). These systems are suitable for both pressure and non-pressure applications and are in accordance with NEN-EN 14364. The evaluation guideline applies to pipes, fittings and their connections with nominal diameters ranging from DN 100 to DN 4000, intended for the transport of surface water or wastewater with temperatures up to 50°C.
Download Evaluation Guideline BRL 52204
Important
In the application, the products are not intended for use under continuously varying loads. With a continuously varying load is meant here cyclical load with a frequency of at least 1 cycle per minute between 2 load levels.
Note: The product can be used under continuously varying loads in internal pressure applications. In that case, it must be tested according to ISO 15306. Your pipes can be made according to different processes. For instance:
- rotational casting;
- wrapping continuous filament;
- winding filament crosswise.
Find certified companies and organizations
Search company name, city, standard, BRL and/or certificate number with this finder on the Kiwa Netherlands website.
KOMO Certification and Testing for Infiltration Systems
Plastic pipe systems for the storage and infiltration of rainwater can be certified with the KOMO quality mark. KOMO quality statements under Kiwa assessment guideline BRL- 52250.
KOMO Certification and Testing of Plastic Piping Products for Drainage Systems
Plastic piping products for drainage systems can be certified with the KOMO quality mark. KOMO quality statements under Kiwa assessment guidelines BRL- 1401, 1404, 1405, 1410, 1411 and 1412.
Performance Testing for Plastics, Multilayer- and GRP (Glass reinforced Plastics) Piping Systems
Physical, mechanical, chemical, leak tightness and hydrostatic pressure testing on all types of plastic piping systems to have certification requirements validated and demonstrate compliance to national and international product standards.
KOMO Testing and Certification Prefab Pipe Passages into Buildings
Prefab pipe passages into buildings can be certified for the KOMO high quality mark. KOMO quality statements under Kiwa evaluation guidelines BRL- 3801 and BRL- 2055.
Additional information
Private Label certification: Your product, your brand, with a Kiwa certificate
Do you want to sell a certified product under your own brand without being the manufacturer yourself? With Kiwa’s Private Label certification, you can.