Crack-filling materials - Products and systems for the protection and repair of concrete structures

This product is intended for the testing, inspection, and certification of crack-filling materials for

adhesive-bonded,

expandable, and

swelling-type filling

of cracks, voids, and defects in concrete.

Receive a quote tailored to your needs

+49 (0) 6145 / 59 71 0

Are you a manufacturer, designer, installer, expert, or consultant? Then get more information about our products. We’re happy to assist you!

In accordance with the Construction Products Regulation, crack-filling compounds for our application require CE marking and a declaration of conformity in accordance with DIN EN 1504-5 / the German application standard DIN V 18028.

First, the crack filler is classified according to its intended use. The classification of the crack filler is based on the test report. The declaration of performance can be issued by the manufacturer—System 4 (for low requirements).

Subsequently, the inspection and certification of the factory production control are carried out, and a certificate of conformity is issued by Kiwa, Polymer Institute branch—System 2+ (for all requirements).

Related services

ETA and EAD - CE marking for construction products

For the construction products for which a harmonized European standard is available the CE marking is mandatory when you want to place them on the European internal market. For the other construction products there is the possibility of applying a...