Testing

When you bring something new onto the market, you want to eliminate quality and safety risks. After all, your potential customers or clients need to be able to trust your product, component, (raw) material or its application. In other words, they'll have to be confident that it reliably performs the way it is supposed to, compliant with local and international rules and regulations. Kiwa's independent, fully equipped and highly qualified testing labs and services bring that trust.

Filters
Service
Market
Services (35 results)
Calibration of Torque Gauges

Tightening copies are a key parameter for the success of structural fasteners made by bolting.

Read more
Pressure tightness testing

The Pressure Tightness Test in accordance with UNI EN ISO 1167 Standards is aimed at manufacturers of pipes, fittings and plastic systems who need to verify their resistance under the most extreme conditions.

Read more
Kiwa Thermostatic Mixing Valve Certification (TMV type 2 and 3)

Kiwa Watertec | TMV thermostatic mixing valves testing and certification

Read more
NSF ANSI CAN 61: Drinking water
Compliance to BSMI Certification by Kiwa

The BSMI Certification ensures that drinking water related products meet safety, health and environmental regulations and standards. The Taiwan Commodity Inspection Schemes are administered by the Bureau of Standards, Metrology and Inspection (BSMI), which is the authority responsible for standardization, metrology and product inspection in Taiwan.

Read more
Chemical Analysis of Metallic Materials

Checking the chemical composition of a metallic material, ferrous and nonferrous, is of paramount importance whenever a material needs to be classified according to regulations, or checked for correspondence with what is declared in the certificate of origin.

Read more
Metrology Assistance

Kiwa Italia offers qualified support for the correct approach in managing measurement processes, from design to control, and for the best use of measuring instruments.

Read more
Coordinate Measuring Machines (CMM)

Three-dimensional Measuring Machines, or Coordinate Measuring Machines (CMMs), are widely used in manufacturing and service companies and in many commodity sectors because they have high operational flexibility.

Read more
Calibration of Multimeters and Current Clamps

Multimeters and Current Clamps are among the best known and most widely used instruments for measuring electrical quantities such as: direct voltage, alternating voltage, direct current, alternating current, and resistance.

Read more
Determination of the Fluidity Index of Plastic Materials.

The test for Determining the Fluidity Index of Plastic Materials in accordance with the UNI EN ISO 1133 Standard is aimed at plastics manufacturers and processors and Quality Managers and allows them to characterize the type of material based on its fluidity and density.

Read more
Determination of softening temperature

Vicat UNI EN ISO 306 and UNI EN ISO 2507 Polymer Softening Temperature Determination Test conducted in Kiwa Laboratory.

Read more
Mechanical Testing

Mechanical tests are essential for evaluating the characteristics of the behavior of metallic materials in service.

Read more
Determination of deflection temperature under load

The Determination of Inflection Temperature Under Load test according to ISO Standard 75 is aimed at plastics manufacturers and processors and enables them to ensure that the declared characteristics meet the requirements imposed by the relevant standards.

Read more
Metrology for the Construction Industry

Kiwa Italia offers customers in the construction industry a specialized calibration and management service for measuring equipment.

Read more
Accelerated Corrosion Testing

The Kiwa laboratory is equipped with equipment that performs tests of accelerated corrosion, climatic conditioning, thermal shock, and ultraviolet aging. Samples are tested with respect to their resistance to corrosion, to any temperature changes, sudden or otherwise, and to solar irradiation.

Read more
Calibration of Optical Discs

Optical disks are typically used by companies for flatness measurements on measuring equipment and products that have high quality lapping and surface finishes.

Read more
Calibration of Instruments in Frequency

Kiwa Italia is accredited to calibrate common portable and benchtop instruments such as oscilloscopes, scopemeters, signal generators and electronic meters.

Read more
Impact tests – Falling weight

The UNI EN ISO 3127 and UNI EN ISO 11173 impact tests are aimed at plastic pipe manufacturers with the purpose of determining external impact resistance.

Read more
Tensile Testing

Tensile tests UNI EN ISO 527 and UNI EN ISO 6259 are intended to test the conformity of physical and mechanical properties of plastics.

Read more
Rubbers testing
Performance Testing for Rubbers and Adhesives

Kiwa testing on rubber and adhesives to have certification requirements validated and demonstrate compliance to national and international product standards.

Read more
Sanitary Tapware Components and Accessories
Performance Testing for Sanitary Tapware and Accessories

Mechanical, chemical, leak tightness and hydrostatic test pressure on all types of sanitary tapware, accessories, valves, back flow devices, water meters and many other devices.

Read more
Windmills
Wind turbine generator (WTG) testing and inspection services

To reduce carbon emissions the global community increasingly strives to generate energy using renewable sources. In many European countries electricity generated by wind turbine generators (WTG’s) already accounts for a significant part of the available green energy.

Read more
Water Regs Testing and Approval (WRAS)

Kiwa Watertec | WRAS - Water Regulations Advisory Scheme Testing

Read more
Testing on Paint

The Kiwa laboratory supports companies in ensuring the reliability of their coating process by verifying coating characteristics.

Read more
Calorimetric tests

UNI EN ISO 11357-4 calorimetric testing for companies wishing to test the polymer matrix of a given plastic material.

Read more