• Heat loss occurs in all buildings. An infrared camera can be used to visualise this heat loss, which is invisible to the eye.
    Show
  • In addition to contact with chloride-containing de-icing agents (de-icing salts), enrichment through direct contact with chemical substances or combustion residues from plastics in the event of a fire are frequent causes of chloride-induced corrosion of the reinforcement.
    Show
  • The “MPA-Performance-Test” is a procedure for testing increased resistance of mineral systems to chemical attack (especially to acid).
    Show
  • ISO 50001 Energy Management system certification with Kiwa: conserve resources, save money and mitigate climate change.
    Show
  • ISO 45001 is a tool to systematically fulfill the legal obligation for employers to ensure the health and safety of employees and to pursue a policy aimed at achieving the best possible working conditions.
    Show
  • With the help of a wooden beam ceiling test stand, the lightweight construction ceiling is available in the test laboratory. With this test stand, the sound experts can test the insulation of the impact sound according to DIN EN ISO 10140-3.
    Show
  • Not every structural analysis requires interventions in the building fabric. Various non-destructive or low-destructive test methods are available, especially for an initial assessment of the existing damage potential or to confirm the correct construction.
    Show
  • VCA and VCU health, safety and environment certification with Kiwa: create safe working conditions for contractors and reduce accidents.
    Show
  • EPDs are type III environmental declarations and are regulated by DIN EN ISO 14025 and DIN EN 15804. They contain quantifiable environmental information on a European harmonized, scientific basis. The data are developed by taking a holistic view of the product, optimization potentials along the material.
    Show
  • ISO 37001 Anti-bribery Management Systems Certification with Kiwa: prevent, detect and address bribery to build trust in your brand and boost your business.
    Show
  • In Europe, the most important regulation for liquid applied membranes is the EAD 030350-00-0402 (formerly ETAG 005). Kiwa tests your products and approves your products for the European Market.
    Show
  • ISO 9001 Quality Management Systems Certification with Kiwa: improve your performance, meet customers’ needs and increase your profit.
    Show
  • ISO 27001 Information Security Certification with Kiwa: secure your information, build trust in your brand.
    Show
  • For the construction products for which a harmonized European standard is available the CE marking is mandatory when you want to place them on the European internal market. For the other construction products there is the possibility of applying a...
    Show
  • The alkali-silica reaction (ASR) is one of the most frequent causes of cracking due to driving reactions and efflorescence on concrete structures. All structures that are exposed to moisture are affected – from bridges and structures in contact with groundwater to traffic routes and air traffic areas.
    Show
  • Airborne sound insulation of building products ISO 101402; measurement of sound absorption in reverberation chambers ISO 354; determination of sound absorption coefficient in impedance tube ISO 10534-1/2; determination of dynamic stiffness ISO 29052-1; testing of noise characteristics of fittings & equipment ISO 3822
    Show
  • ISO 14001 Environmental Management Certification with Kiwa: reduce waste, gain customer trust and be competitive.
    Show
  • Kiwa carries out testing in the field of construction glass  for heat protection and thermal insulation in buildings in accordance with EN 1279-6.
    Show
  • EMAS certification with Kiwa: reduce your environmental impacts, engage employees and boost your reputation.
    Show