Services

  • Use the Kiwa Water Mark as a producer or supplier. If you want to market yourself with products that meet all requirements; both functional as well as all legal hygienic requirements specified in the “Materials and chemicals in the supply of drinking water and warm tap water Regulation” by the Dutch government.
    Show
  • The products are intended to be used for the transport of drinking water and a working pressure of 1MPa (1,000 kPa), with a water temperature up to 65˚C and a maximum water temperature up to 90˚C for a period of maximum 1 hour.
    Show
  • Retesting older fields in order to extend the life of artificial turf football pitches.
    Show
  • Kiwa provides global testing and certification of domestic, commercial and industrial catering appliances.
    Show
  • Kiwa can test your PV inverters and grid connections. Kiwa is also Notified Body on all relevant directives that apply to inverters – electromagnetic compatibility directive (EMC-D), low voltage directive (LVD) and grid connection - our test facilities and expertise are available to you.
    Show
  • The EN 50131-5-3 standard applies to intrusion alarm equipment using radio frequency (RF) links and located on protected premises. The EN 50131-5-3 standard defines the terms used in the field of intrusion alarm equipment using radio frequency links as well as the requirements relevant to the equipment.
    Show
  • The costs for the repair or exchange of a critical rubber part can be much higher than the initial costs of the rubber part itself. In that case it very profitable to know the expected service life of the specific rubber product beforehand.
    Show
  • As a manufacturer or supplier of rubber sealing products you want to deliver high quality products. Your client demands a product that does its sealing function well during its complete service life. We can help you to investigate, testing and certify your rubber sealing products.
    Show
  • Service life investigations of plastic and rubber products
    Show
  • Activities for Australia and New Zealand-vKiwa and SAI Global have built up for many years an extensive co-operation in the field of sanitary products. Our laboratory is recognized by SAI Global, Global Mark, IAPMO Oceana and AGA for conducting tests according to Australian Standards.
    Show
  • The shower heads and hand showers may be used in tap water installations with a maximum working pressure of 1000 kPa. The recommended limits for correct operation are a dynamic pressure between 100 kPa and 500 kPa and a water temperature of maximu...
    Show
  • One of the success factors in creating a hydrogen economy is having safe and certified hydrogen generators. Kiwa is one of the leading parties in this area: We assist you, as a manufacturer in the hydrogen marketplace, to achieve safe and certifie...
    Show
  • Plastocs and rubbers are frequently used in applications where contact with chemicals, gases, detergents or oils are intended or cannot be avoided. The resistance of the polymer materials to these substances must therefore be known before such an application is considered.
    Show
  • The EN 50136-2 standard is applicable for Supervised Premises Transciever. This European Standard specifies the general equipment requirements for the performance, reliability, resilience, security and safety characteristics of supervised premises...
    Show
  • The products are intended to be applied in drinking water installations for the transport and distribution of hot and cold water.
    Show
  • Type approval for taps and water supply systems is the easiest way to indicate conformity of construction products with regulatory requirements in Sweden. The approval also indicates suitability for the application.
    Show
  • Kiwa can help you with quality controls and validations, maintenance inspections, investigations of residual service life, specific tests and consultancy in the field of composite wall panels.
    Show
  • Find out if the quality of a weld is good enough to withstand extreme pressure or to verify the properties of a material with destructive testing (DT).
    Show
  • To reduce carbon emissions the global community increasingly strives to generate energy using renewable sources. In many European countries electricity generated by wind turbine generators (WTG’s) already accounts for a significant part of the available green energy.
    Show
  • Effective and long term performance of rubber seals is essential to prevent leakage of pipelines and subsequent spillage of water and high costs for repair and damage. Increasingly, authorities, pipe system suppliers and other parties in the chain of custody are demanding proof of quality of rubber seals.
    Show