Welcome to the Kiwa global website. Would you like more information about what Kiwa can offer you in the country you are
located? Please select your language.
Navigate through Kiwa's extended landscape of laboratory solutions with our detailed testing directory, embodying the essence of more than 3000 capabilities within 80 laboratories around the globe. Our Laboratory Capabilities directory is a testament to Kiwa's dedication to fostering innovation, enhancing quality, and delivering comprehensive support across a multitude of sectors. Experience the synergy of cutting-edge technology and expert knowledge, as Kiwa paves the way for advancements in safety, quality, and sustainability.
General requirements and tests of luminaires for road and street lighting
Accredited: Yes
Capability | Description | Standard |
---|---|---|
Appliances having one or more burners with an automatic buner control system | Domestic cooking appliances burning gas-Safety- Appliances having one or more burners with an automatic buner control system |
EN 30-1-4 EN 30-1-4 |
Luminous radiant heaters | Non-domestic gas-fired overhead luminous radiant heaters - Safety_x000d_ - Single burner gas-fired overhead radiant tube heaters for non- domestic use - Rational use of energy |
EN 419-2 EN 419-2 EN 419-1 EN 419-1 |
Air heaters | Non- Domestic direct gas fired forced convection air heaters for space heating not exceeding a net heat input of 300 kW |
EN 525 EN 525 |
Appliances for heating liquids | Safety of household and similar electrical appliances and particular requirements appliances for heating |
EN IEC 60335-2-15:2003 EN IEC 60335-2-15:2003 |
Appliances having a glass ceramic hotplate | Domestic cooking appliances burning gas - Safety - Appliances having a glass ceramic hotplate |
EN 30-1-3 EN 30-1-3 |
Aquarium luminaires | General requirements and tests of luminaires for aquarium luminaires |
EN IEC 60598-2-11 EN IEC 60598-2-11 |
Assessment of energy consumption | Gas-fired domestic appliances producing hot water - Appliances not exceeding 70 kW heat input and 300 l water storage capacity - Part 2: Assessment of energy consumption |
EN 13203-2 EN 13203-2 |
Assessment of performance of hot water deliveries | Gas-fired domestic appliances producing hot water - Appliances not exceding 70 kW heat input and 300 l water storage capacity - Part 1: Assessment of performance of hot water deliveries |
EN 13203-1 EN 13203-1 |
Ball Pressure Test - Fire hazard testing | This part of IEC 60695 specifies the ball pressure test as a method for evaluating the softening temperature and accelerated material flow under load of polymeric materials and parts of end products in their ability to resist abnormal heat. |
EN 60695-10-2 EN 60695-10-2 |
Barbecues | Specification for dedicated liquefied petroleum gas appliances - Barbecues for outdoor use contact grills included |
EN 498 EN 498 |
Battery chargers | Safety of household and similar electrical appliances and particular requirements for battery chargers |
EN 60335-2-29:2004 +A1 +A2 EN 60335-2-29:2004 +A1 +A2 |
Bend tests | Destructive tests on welds in metallic materials - Bend tests |
EN ISO 5173 EN ISO 5173 |
Boiling pans | Gas heated catering equipment - Specific requirements - Boiling pans |
EN 203-2-3 EN 203-2-3 |
Brat pans and paëlla cookers | Gas heated catering equipment - Specific requirements - Brat pans and paëlla cookers |
EN 203-2-8 EN 203-2-8 |
Burners | Automatic forced draught burners for gaseous fuels |
EN 676 EN 676 |
Carbon monoxide detector test | Electrical apparatus for the detection of carbon monoxide in domestic premises. Part 1: Test methods and performance requirements |
EN 50291-1 EN 50291-1 |
Chargrills | Gas heated catering equipment - Specific requirements - Chargrills |
EN 203-2-10 EN 203-2-10 |
Clothes dryers and towel rails | Safety of household and similar electrical appliances and particular requirements for clothes dryers and towel rails |
EN IEC 60335-2-43 EN IEC 60335-2-43 |
Commercial dispensing appliances and vending machines | Safety of household and similar electrical appliances and particular requirements for commercial dispensing appliances and vending machines |
EN IEC 60335-2-75:2004 EN IEC 60335-2-75:2004 |
Commercial electric bains-marie | Safety of household and similar electrical appliances and particular requirements for commercial electric bains-marie |
EN IEC 60335-2-50:2003 EN IEC 60335-2-50:2003 |
Commercial electric boling pans | Safety of household and similar electrical appliances and particular requirements for commercial electric boling pans |
EN IEC 60335-2-47:2003 EN IEC 60335-2-47:2003 |
Commercial electric cooking ranges, ovens, hobs and hob elements | Safety of household and similar electrical appliances and particular requirements for commercial electric cooking ranges, ovens, hobs and hob elements |
EN IEC 60335-2-36:2004 EN IEC 60335-2-36:2004 |
Commercial electric forced convection ovens, steam cookers and steam convection ovens | Safety of household and similar electrical appliances and particular requirements for commercial electric forced convection ovens, steam cookers and steam convection ovens |
EN IEC 60335-2-42:2003 EN IEC 60335-2-42:2003 |
Commercial electric griddles and griddle grills | Safety of household and similar electrical appliances and particular requirements for commercial electric griddles and griddle grills |
EN IEC 60335-2-37:2004 EN IEC 60335-2-37:2004 |
Commercial electric griddles and griddle grills | Safety of household and similar electrical appliances and particular requirements for commercial electric griddles and griddle grills |
EN IEC 60335-2-38:2003 EN IEC 60335-2-38:2003 |
Commercial electric hot cupboards | Safety of household and similar electrical appliances and particular requirements for commercial electric hot cupboards |
EN IEC 60335-2-49 EN IEC 60335-2-49 |
Commercial electric kitchen machines | Safety of household and similar electrical appliances and particular requirements for commercial electric kitchen machines |
EN IEC 60335-2-64 EN IEC 60335-2-64 |
Commercial electric multi-purpose cooking pans | Safety of household and similar electrical appliances and particular requirements for commercial electric multi-purpose cooking pans |
EN IEC 60335-2-39:2003 EN IEC 60335-2-39:2003 |
Commercial grillers and toasters | Safety of household and similar electrical appliances and particular requirements for commercial grillers and toasters |
EN IEC 60335-2-48:2003 EN IEC 60335-2-48:2003 |
Convection Heaters | Independed gas fired convection heaters |
EN 613 EN 613 |
Decorative fuel-effect gas appliances | Decorative fuel-effect gas appliances |
EN 509 EN 509 |
Deep fat fryers, frying pans and similar appliances | Safety of household and similar electrical appliances and particular requirements for deep fat fryers, frying pans and similar appliances |
EN 60335-2-13:2010 EN 60335-2-13:2010 |
Degrees of protection provided by enclosures (IP code) (For electrical equipments) | This standard applies to the classification of degrees of protection provided by encloswes for electrical equipment with a rated voltage not exceeding 72.5 kV. |
EN 60529:2013 EN 60529:2013 |
Domestic Cookers | General requirements relating to the domestic cookers for use with liquefied petroleum gases (LPG)_x000d_ &_x000d_ Methods of test for domestic cookers for use with liquefied petroleum gases_x000d_ All Tests can be performed. |
SASO 167 SASO 167 SASO 168 SASO 168 |
Domestic cooking - Rational use of energy | Domestic cooking appliances burning gas - Rational use of energy-General |
EN 30-2-1 EN 30-2-1 |
Domestic cooking appliances burning gas | Domestic cooking appliances burning gas - Safety - General |
EN 30-1-1 EN 30-1-1 |
Electric irons | Safety of household and similar electrical appliances and particular requirements for electric irons |
EN 60335-2-3 EN 60335-2-3 |
Electrical apparatus for the detection of combustible gases in domestic premises | Test methods and performance requirements of electrical apparatus for the detection of combustible gases in domestic premises |
EN 50194-1 EN 50194-1 |
Electrical equipment of machines | Safety of machinery |
EN 60204-1:2006 EN 60204-1:2006 |
Environmental testing - Tests A: Cold | This standards deals with cold tests applicable to both non heat-dissipating and heat-dissipating specimens. For non heat-dissipating specimens, Tests Ab and Ad do not deviate essentially from earlier issues. Test Ae has been added primarily for testing equipment that requires being operational throughout the test, including the conditioning periods. The object of the cold test is limited to the determination of the ability of components, equipment or other articles to be used, transported or stored at low temperature. |
EN 60068-2-1 EN 60068-2-1 |
Environmental testing - Part 1: General and guidance | The IEC 60068 series includes a series of methods for environmental testing along with their appropriate severities, and prescribes various atmospheric conditions for measurements and tests designed to assess the ability of specimens to perform under expected conditions of transportation, storage and all aspects of operational use. |
EN 60068-1 EN 60068-1 |
Environmental testing - Test B: Dry heat | This standard deals with dry heat tests applicable both to heat-dissipating and non heat dissipating specimens. |
EN 60068-2-2 EN 60068-2-2 |
Environmental testing - Test Cab: Damp heat, steady state | Test Cab: Damp heat, steady state |
EN 60068-2-78 EN 60068-2-78 |
Environmental testing - Test Db: Damp heat, cyclic (12 h + 12 h cycle) | To determine of suitability of components, equipment or other articles for use and storage under conditions of high humidity when combined with cyclic temperature changes and, in general, producing under station on the surface of the specimen |
EN 60068-2-30 EN 60068-2-30 |
Extra low-voltage lighting systems for filament lamps | General requirements and tests of luminaires for extra low-voltage lighting systems for filament lamps |
EN 60598-2-23 EN 60598-2-23 |
Fire hazard testing - Glowing/hot-wire based test methods | Glow-wire flammability index (GWFI) test method for materials |
EN IEC 60695-2-12 EN IEC 60695-2-12 |
Fire hazard testing – Glowing/hot-wire based test methods | Glow-wire flammability test method for end-products (GWEPT) |
EN IEC 60695-2-11 EN IEC 60695-2-11 |
Fire hazard testing – Glowing/hot-wire based test methods | Glow-wire ignition temperature (GWIT) test method for materials |
EN IEC 60695-2-13 EN IEC 60695-2-13 |
Fire hazard testing - Needle-flame test method | This part of IEC 60695 specifies a needle-flame test to simulate the effect of a small flame which may result from fault conditions, in order to assess by a simulation technique the fire hazard. It is applicable to electrotechnical equipment, its sub-assemblies and components and to solid electrical insulating materials or other combustible materials. |
EN IEC 60695-11-5 EN IEC 60695-11-5 |
Fixed general purpose luminaires | General requirements and tests of luminaires for fixed general purpose luminaires |
EN IEC 60598-2-1 EN IEC 60598-2-1 |
Floating Roller Peel Test | Adhesives —_x000d_ Determination of peel_x000d_ resistance of adhesive_x000d_ bonds — Floating roller_x000d_ method |
EN 1464:2010 EN 1464:2010 |
Floodlights | General requirements and tests of luminaires for floodlights |
EN 60598-2-5 EN 60598-2-5 |
Forced convection gas-fired air heaters | Non-domestic forced convection gas-fired air heaters for space heating not exceeding a net heat input of 300 kW incorporating a fan to assist transportation of combustion air or combustion products |
EN 1020 EN 1020 |
Forced-convection ovens and/or grills | Domestic cooking appliances burning gas - Rational use of energy - Appliances having forced-convection ovens and/or grills |
EN 30-2-2 EN 30-2-2 |
Forced-convection ovens and/or grills | Domestic cooking appliances burning gas - Safety - Appliances having forced-convection ovens and/or grills |
EN 30-1-2 EN 30-1-2 |
Fracture test | Destructive tests on welds in metallic materials - Fracture test |
EN ISO 9017 EN ISO 9017 |
Fryers | Gas heated catering equipment - Specific requirements - Fryers |
EN 203-2-4 EN 203-2-4 |
Gas Fired Catering Equipment | Testing of gas heated catering equipment Part 1 |
SASO GSO EN 203-1 SASO GSO EN 203-1 |
Gas Fired Domestic Cookers | Testing construction and performance characteristics as well as the requirements and methods of test for the safety and marking of domestic cooking appliances, capable of using the combustible gases having one or more enclosed covered burners under a glass ceramic panel |
SASO GSO EN 30-1-3 SASO GSO EN 30-1-3 |
Gas Fired Domestic Cookers | Testing of domestic cooking appliances burning gas having one or more burners with an automatic burner control system |
SASO GSO EN 30-1-4 SASO GSO EN 30-1-4 |
Gas Fired Domestic Cookers | Testing construction and performance characteristics as well as the requirements and methods of test for the safety and marking of freestanding and built-in domestic cooking appliances burning the combustible gases |
SASO GSO EN 30-1-1 SASO GSO EN 30-1-1 |
Gas Fired Domestic Cookers | Requirements and the test method for the rational use of energy of gas burning domestic cooking appliances |
SASO GSO EN 30-2-1 SASO GSO EN 30-2-1 |
Gas Fired Domestic Cookers | Requirements and test method for the rational use of energy of gas cooking appliances having forced convection ovens and/or grills using combustible gases |
SASO GSO EN 30-2-2 SASO GSO EN 30-2-2 |
Gas Fired Domestic Cookers | Testing of appliances having forced-convection ovens and/or grills |
SASO GSO EN 30-1-2 SASO GSO EN 30-1-2 |
Gas heated catering equipment | Gas heated catering equipment - General safety rules |
EN 203-1 EN 203-1 |
Gas Heated Catering Equipment | Gas heated catering equipment - Part 3: Materials and parts in contact with food and other sanitary aspects |
EN 203-3 EN 203-3 |
Gas, oil and solid-fuel burning appliances having electrical connections | Safety of household and similar electrical appliances and particular requirements for gas, oil and solid-fuel burning appliances having electrical connections |
EN IEC 60335-2-102:2006 EN IEC 60335-2-102:2006 |
General requirements for basic safety and essential performance of medical electrical equipment | Medical electrical equipment |
EN 60601-1 EN 60601-1 |
Glow-wire apparatus and common test procedure | This part of IEC 60695 specifies the glow-wire apparatus and common test procedure to simulate the effects of thermal stresses which may be produced by heat sources such as glowing elements or overloaded resistors, for short periods, in order to assess the fire hazard by a simulation technique. |
EN 60695-2-10:2013 EN 60695-2-10:2013 |
Grills, toasters and similar portable cooking appliances | Safety of household and similar electrical appliances and particular requirements for grills, toasters and similar portable cooking appliances |
EN 60335-2-9 EN 60335-2-9 |
Ground recessed luminaires | General requirements and tests of luminaires for ground recessed luminaires |
EN 60598-2-13 EN 60598-2-13 |
Handlamps | General requirements and tests of luminaires for handlamps |
EN 60598-2-8 EN 60598-2-8 |
Hardness testing | Destructive tests on welds in metallic materials - Hardness test on arc welded joints |
EN ISO 9015-1 EN ISO 9015-1 |
Heaters | Single burner gas-fired overhead radiant tube heaters for non-domestic use - Safety_x000d_ - Gas-fired central heating boilers - Assembly comprising a boiler body and a forced draught burner |
EN 416-1 EN 416-1 EN 416-2 EN 416-2 |
Hobs | Methods for measuring performance of household electric cooking appliances |
EN 60350-2 EN 60350-2 |
Hot water heaters for beverage | Gas heated catering equipment - Specific requirements - Hot water heaters for beverage |
EN 203-2-6 EN 203-2-6 |
Household and similar electrical appliances | General requirements relating to household and similar electrical appliances |
EN-IEC 60335-1:2012 EN-IEC 60335-1:2012 |
Impact tests | Destructive tests on welds in metallic materials - Impact tests - Test specimen location, notch orientation and examination |
EN ISO 9016 EN ISO 9016 |
Independent hotplates | Specification for dedicated liquified petroleum gas appliances independed hotplates. Including those incorporating a grill for outdoor use |
EN 484 EN 484 |
Instantaneous water heaters | Safety of household and similar electrical appliances and particular requirements for instantaneous water heaters |
EN IEC 60335-2-35:2003 EN IEC 60335-2-35:2003 |
Kitchen machines | Safety of household and similar electrical appliances and particular requirements for kitchen machines |
EN IEC 60335-2-14 EN IEC 60335-2-14 |
Lamp Controlgear | Lamp controlgear - Part 1: General and safety requirements |
EN 61347-1 EN 61347-1 |
Lap Shear Test | Adhesives —_x000d_ Determination of_x000d_ tensile lap-shear_x000d_ strength of bonded_x000d_ assemblies |
EN 1465:2009 EN 1465:2009 |
Liquefied petroleum gas appliances | Specifications for dedicated liquefied petroleum gas appliances - Portable vapour pressure liquefied petroleum gas appliances |
EN 521 EN 521 |
Luminaires | General requirements and tests of luminaires |
EN 60598-1 EN 60598-1 |
Luminaires for road and street lighting | General requirements and tests of luminaires for road and street lighting |
EN IEC 60598-2-3 EN IEC 60598-2-3 |
Luminaires for use in clinical areas of hospitals and health care buildings | General requirements and tests of luminaires for use in clinical areas of hospitals and health care buildings |
EN 60598-2-25 EN 60598-2-25 |
Luminaires with limited surface temperatures | General requirements and tests of luminaires for luminaires with limited surface temperatures |
EN IEC 60598-2-24 EN IEC 60598-2-24 |
Lumineires with built-in transformers for flament lamps | General requirements and tests of luminaires for lumineires with built-in transformers for flament lamps |
EN IEC 60598-2-6 EN IEC 60598-2-6 |
Macroscopic and microscopic examination of welds | Destructive tests on welds in metallic materials - Macroscopic and microscopic examination of welds |
EN ISO 17639 EN ISO 17639 |
Measurement of low power consumption | Electrical and electronic household and office equipment - Measurement of low power consumption |
IEC 62301 IEC 62301 |
Measurement of low power consumption | Electrical and electronic household and office equipment - Measurement of low power consumption |
EN 50564 EN 50564 |
Measuring method of the energy consumption of gas fired ovens | Measuring method of the energy consumption of gas fired ovens |
EN 15181 EN 15181 |
Metal Chimney Lab. | Thermal performance, gas leakage and condensation, rain water resistance testing of metal chimneys falling under EN 1856-1/-2. |
EN 1859 EN 1859 |
Method for the determination of the proof and the comparative tracking indices of solid insulating materials | This international standard specifies the method of test for the determination of the prof and comparative tracking indices of solid insulating meterials on pieces taken from parts of equipment and on plaques of material using alternating voltages. |
EN IEC 60112 EN IEC 60112 |
MT-Magnetic particle testing | Non-destructive testing of welds - Magnetic particle testing |
EN ISO 17638 EN ISO 17638 |
Multi Purpose Boiling Burners For Outdoor Use | Specification for dedicated liquefied petroleum gas appliances- Multi purpose boiling burners for outdoor use |
EN 497 EN 497 |
Open burners and wok burners | Gas heated catering equipment - Specific requirements - Open burners and wok burners |
EN 203-2-1 EN 203-2-1 |
Outdoor barbecues | Safety of household and similar electrical appliances and particular requirements for outdoor barbecues |
EN IEC 60335-2-78:2003 EN IEC 60335-2-78:2003 |
Ovens | Gas heated catering equipment - Specific requirements - Ovens |
EN 203-2-2 EN 203-2-2 |
Pasta cookers | Gas heated catering equipment - Specific requirements - Pasta cookers |
EN 203-2-11 EN 203-2-11 |
Peel and chisel testing | Specimen dimensions and procedure for mechanized peel testing resistance spot, seam and embossed projection welds_x000d_ - Resistance welding - Testing of welds - Peel and chisel testing of resistance spot and projection welds |
EN ISO 10447 EN ISO 10447 EN ISO 14270 EN ISO 14270 |
Peel test (adhesively bonded reflective tape) | Peel, ageing, water immersion, salt spray tests and exposure resistances |
WSB-M11P56-A WSB-M11P56-A |
Portable general purpose luminaires | General requirements and tests of luminaires for portable general purpose luminaires |
EN 60598-2-4 EN 60598-2-4 |
Pressure Cookers | Domestic Use Pressure Cooker Safety Testing |
EN 12983-1 EN 12983-1 EN 12778 EN 12778 |
PT-Penetrant testing | Non-destructive testing - Penetrant testing |
EN ISO 3452-1 EN ISO 3452-1 |
Radiant Tube Heater | Multi burner gas fired overhead radiant tube heather systems for non domestic use- Part 2: System E- Safety |
EN 777-2 EN 777-2 |
Radiant Tube Heater | Multi- Burner gasfired radiant tube heater systems for non- Domestic use- Part 4: System H- Safety |
EN 777-4 EN 777-4 |
Radiant Tube Heater | Multi- Burner gas- Fired overhead radiant tube heater systems for non- Domestic use Part 1: System D- Safety |
EN 777-1 EN 777-1 |
Radiant Tube Heater | Multi- Burner- Gas- Fired overhead radiant tube heather systems for non- domestic use- Part 3: System F- Safety |
EN 777-3 EN 777-3 |
Range hoods and other cooking fume extractors | Safety of household and similar electrical appliances and particular requirements for range hoods and other cooking fume extractors |
EN IEC 60335-2-31:2003 EN IEC 60335-2-31:2003 |
Ranges, ovens, steam ovens and grills | Methods for measuring performance of household electric cooking appliances |
EN 60350-1 EN 60350-1 |
Recessed luminaires | General requirements and tests of luminaires for recessed luminaires |
EN IEC 60598-2-2 EN IEC 60598-2-2 |
Refrigerating Appliances, Ice-cream Appliances and Ice-makers | Safety of Household and similar electrical appliances -Part 2-24: Particular requirements for refrigerating appliances, ice-cream appliances and ice-makers |
EN 60335-2-24 EN 60335-2-24 |
Room heaters | Safety of household and similar electrical appliances and particular requirements for room heaters |
EN IEC 60335-2-30:2010 EN IEC 60335-2-30:2010 |
Rotating Electrical Machines | Rotating electrical machines -- Part 1: Rating and performance |
EN 60034-1 EN 60034-1 |
RT-Radiographic testing | Non-destructive testing of welds Radiographic testing_x000d_ X-ray techniques with film |
EN ISO 17636-1 EN ISO 17636-1 |
Salamanders and rotisseries | Gas heated catering equipment - Specific requirements - Salamanders and rotisseries |
EN 203-2-7 EN 203-2-7 |
Shavers, hair clippers and similar appliances | Safety of household and similar electrical appliances and particular requirements for shavers, hair clippers and similar |
EN 60335-2-8 EN 60335-2-8 |
Shear testing | Specimen dimensions and procedure for shear testing resistance spot, seam and embossed projection welds |
EN ISO 14273 EN ISO 14273 |
Solid tops, warming plates and griddles | Gas heated catering equipment - Specific requirements - Solid tops, warming plates and griddles |
EN 203-2-9 EN 203-2-9 |
Space Heaters | Specifications for dedicated liquefied petroleum gas appliances-Flueless non-Domestic space heaters not exeeding 10 kW |
EN 461 EN 461 |
Space Heaters | Specification for dedicated liquefied petroleum gas appliances - Domestic flueless space heaters (including diffusive catalytic combustion heaters) |
EN 449 EN 449 |
Stationary cooking ranges, hobs, ovens and similar appliances | Safety of household and similar electrical appliances and particular requirements for stationary cooking ranges, hobs, ovens and similar appliances |
EN 60335-2-6 EN 60335-2-6 |
Stop time measurement test | Calculation of the necessary safety distance between hazardous point and safety device |
EN ISO 13855 EN ISO 13855 |
Storage water heaters | Safety of household and similar electrical appliances and particular requirements for storage water heaters |
EN IEC 60335-2-21:2003 EN IEC 60335-2-21:2003 |
Structural adhesives | Structural adhesives - Testing of adhesively bonded joints - Bead peel test |
DIN 54457 DIN 54457 |
Tension testing | Specimen dimensions and procedure for cross tension testing resistance spot and embossed projection welds_x000d_ - Resistance welding - Destructive tests on welds in metallic materials - Torsion test of resistance spot welds |
EN ISO 14272 EN ISO 14272 EN ISO 17653 EN ISO 17653 |
Testing of Boilers | Gas-fired central heating boilers - Part 2-2: Specific standard for type B1 appliances |
EN 15502-2-2 EN 15502-2-2 |
Testing of Boilers | Gas-fired central heating boilers - Part 2-1: Specific standard for type C appliances and type B2, B3 and B5 appliances of a nominal heat input not exceeding 1 000 kW |
EN 15502-2-1 EN 15502-2-1 |
Testing of Boilers | Gas-fired heating boilers - Part 1: General requirements and tests |
EN 15502-1 EN 15502-1 |
Testing of Water Heaters | Gas-fired instantaneous water heaters for the production of domestic hot water |
EN 26 EN 26 |
Transverse tensile test | Destructive tests on welds in metallic materials - Transverse tensile test |
EN ISO 4136 EN ISO 4136 |
UT-Ultrasonic testing | Non-destructive testing of welds - Ultrasonic testing - Techniques, testing levels, and assessment |
EN ISO 17640 EN ISO 17640 |
Vacuum cleaners and water-Suction cleaning appliances | Safety of household and similar electrical appliances and particular requirements for vacuum cleaners and water-Suction cleaning appliances |
EN 60335-2-2 EN 60335-2-2 |
VT-Visual testing | Non-destructive testing of welds - Visual testing of fusion-welded joints |
EN ISO 17637 EN ISO 17637 |
Warming plates and similar appliances | Safety of household and similar electrical appliances and particular requirements for warming plates and similar appliances |
EN 60335-2-12 EN 60335-2-12 |
Adhesives_x000d_ Guide to the selection of standard laboratory ageing conditions for testing bonded joints
Accredited: No
Capability | Description | Standard |
---|---|---|
Accelerated ageing | Testing of rubber |
DIN 53508 |
Determination of liquid water permeability EN 1062-3 | EN 1504-2 for an impregnation_x000d_ For paints and varnishes |
EN 1062-3 |
determination of shear resistance of joints | Flexible sheets for waterproofing - Part 1: Bitumen sheets for roof waterproofing; determination of shear resistance of joints |
DIN EN 12317-1 |
Determination of slant shear strength | Products and systems for the protection and repair of concrete structures - Test methods |
DIN EN 12615 |
Determination of watertightness of injected cracks without movement in concrete | Products and systems for the protection and repair of concrete structures - Test methods |
DIN EN 14068 |
Measurement of bond strength by pull-off DIN EN 1542 | Sprayable polymer cerment concrete SRM according to ZTV-ING |
DIN EN 1542 |
Tensile lap-shear strength of bonded assemblies | Adhesives; Determination of tensile lap-shear strength of bonded assemblies |
DIN EN 1465 |
Thunder-shower cycling (thermal shock) DIN EN 13687-2 | Sprayed mortal SRM according to ZTV-ING |
DIN EN 13687-2 |
Accelerated ageing and heat resistance tests ISO 188 | ZTV Fug-Stb 15 |
ISO 188 |
Adhesion and expansion test | Testing of sealing compounds in buildings constructions_x000d_ Part 1: Conditioning in standard atmospheres, water or increased temperatures |
DIN 52455-1 |
Adhesion by tensile bond strength | Products and systems for the protection and repair of concrete structures - Test methods_x000d_ Part 1: Adhesion and elongation capacity of injection products with limited ductilit_x000d_ Part 2: Determination of the adhesion of injection products, with or without thermal cycling - Adhesion by tensile bond strength_x000d_ Part 3: Determination of the adhesion of injection products, with or without thermal cycling - Slant shear method |
DIN EN 12618-2 DIN EN 12618-3 DIN EN 12618-1 |
Adhesion/Cohesion properties after immersion in liquid chemicals EN 14187-6 | Test programm according to TL Fug-StB15 and EN 14188-2 |
EN 14187-6 |
Adhesives for ceramic tiles | Part 2: Test methods |
DIN EN 12004-2 |
Analysis by infrared spectrometry | Testing of petroleum products and related products; General working principles |
DIN 51451 |
Artifical weathering by UV irradiation EN 14187-8 | Test programm according to TL Fug-StB15 and EN 14188-2 |
EN 14187-8 |
Artificial mineral fibres (KMF) | In-house method: QMA P Bau HV 697 KMF Rev.1 2021-03 |
TRGS 905 |
Buchholz indentation test | Paints and varnishes |
DIN EN ISO 2815 |
Ceramic tiles | Part 2: Determination of dimensions and surface quality_x000d_ Part 3: Determination of water absorption, apparent porosity, apparent relative density and bulk density_x000d_ Part 4: Determination of modulus of rupture and breaking strength_x000d_ Part 6: Determination of resistance to deep abrasion for unglazed tiles_x000d_ Part 7: Determination of resistance to surface abrasion for glazed tiles_x000d_ Part 8: Determination of linear thermal expansion_x000d_ Part 9: Determination of resistance to thermal shock_x000d_ Part 12: Determination of frost resistance_x000d_ Part 13: Determination of chemical resistance_x000d_ Part 14: Determination of resistance to stains |
DIN EN ISO 10545-2 DIN EN ISO 10545-8 DIN EN ISO 10545-3 DIN EN ISO 10545-4 DIN EN ISO 10545-12 DIN EN ISO 10545-6 DIN EN ISO 10545-7 DIN EN ISO 10545-13 DIN EN ISO 10545-14 DIN EN ISO 10545-9 |
Change in mass and volume after immersion in liquid chemicals (direkt and after reconditioning), classes B, C, D EN 14187-4 | Test programm according to TL Fug-StB15 and EN 14188-2 |
EN 14187-4 |
Characterization of perceptible properties | Bitumen and bituminous binders |
DIN EN1425 |
Chlorine content | For plastics; Vinyl chloride homopolymers and copolymers_x000d_ Determination of chlorine content_x000d_ |
DIN EN ISO 1158 |
Classification and requirements for sealants | Building construction - Jointing products |
DIN EN ISO 11600 |
Cohesion EN ISO 9047 | Test programm according to TL Fug-StB15 and EN 14188-2 |
EN ISO 9047 |
Collection and exchange of reliability and maintenance data for equipment | For petroleum, petrochemical and natural gas industries |
DIN EN 14224 |
Compatibility of injection products | Products and systems for the protection and repair of concrete structures - Test methods_x000d_ Part 1: Compatibility with concrete_x000d_ Part 3: Effect of injection products on elastomers |
DIN EN 12637-1 DIN EN 12637-3 |
Compatibility of sealants | Testing of sealants in building construction - Compatibility of sealants_x000d_ Part 2: Change of adhesion/cohesion properties after immersion in chemical liquids |
DIN 52452-2 |
Compatibility on wet concrete | Products and systems for the protection and repair of concrete structure_x000d_ Test method - Compatibility on wet concrete |
DIN EN 13578 |
cover and repair of concrete components | 2.3.7 (Determination of Pot-life)_x000d_ 2.7.4 (Determination of adhesive tensile strength; examine the surface of mortar)_x000d_ |
DAfStb-Instandsetzungsrichtlinie |
Cracking-bridging ability EN15812 | Tests according to DIN EN 15814 |
EN 15812 |
Cross-cut test | Paints and varnishes |
DIN EN ISO 2409 |
Definitions and characteristics | Flexible sheets for waterproofing_x000d_ DIN EN 13707 Reinforced bitumen sheets for roof waterproofing_x000d_ DIN EN 13970 Bitumen water vapour control layers |
DIN EN 13970 DIN EN 13707 |
Definitions, requirements, quality control and evaluation of conformity | Products and systems for the protection and repair of concrete structures_x000d_ Part 5: Concrete injection |
DIN EN 1504-5 |
Density EN ISO 1183-1 | Sealants for non-structural use in joints in buildings and pedestrian walkways DIN EN 15651-1 |
DIN EN ISO 1183-1 |
Determination and classification of water-vapour transmission rate EN ISO 7783-1+2 | EN 1504-2 for an impregnation |
EN ISO 7783-2 EN ISO 7783-1 |
Determination of abrasion resistance ISO 5470-1 | EN 1504-2 for an impregnation |
EN ISO 5470-1 |
Determination of adhesion and cohesion following continuous extension (Testing temperature: -20°C) EN 13880-10 | EN 14188-1 |
EN 13880-10 |
Determination of adhesion of granules | Flexible sheets for waterproofing - Bitumen sheets for roof waterproofing |
EN 12039 |
Determination of adhesion steel-to-steel for characterisation of structural bonding agents | Products and systems for the protection and repair of concrete structures - Test methods |
DIN EN 12188 |
Determination of adhesion/cohesion properties of saelants after exposure to heat, water and artificial light through glass | Building construction_x000d_ Jointing products |
DIN EN ISO 11431 |
Determination of adhesion/cohesion properties of sealants at constant temperature EN ISO 9046 | Sealants for non-structural use in joints in buildings and pedestrian walkways DIN EN 15651-1 |
EN ISO 9046 |
Determination of adhesion/cohesion properties of sealants at variable temperatures EN ISO 9047 | Sealants for non-structural use in joints in buildings and pedestrian walkways DIN EN 15651-1 |
EN ISO 9047 |
Determination of amine functions using the total basicity number | Products and systems for the protection and repair of concrete structures - Test methods; Reactive functions related to epoxy resins |
DIN EN 1877-2 |
determination of ammonia-nitrogen | German standard methods for the examination of water, waste water and sludge_x000d_ cations (group E); determination of ammonia-nitrogen (E 5) |
DIN 38406-5 |
Determination of apparent viscosity using a single cylinder type rotational viscometer method | For plastics_x000d_ Resins in the liquid state or as emulsions or dispersions |
DIN EN ISO 2555 |
Determination of asbestos |
VDI 3866 Part 5 TRGS 519 |
|
Determination of ash | For plastics_x000d_ EN ISO 3451-1 (Part 1: General methods)_x000d_ DIN 52005 (Bitumen and bituminous binders) |
DIN EN ISO 3451-1 DIN 52005 |
Determination of bond strength | Flexible sheets for waterproofing_x000d_ Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles |
DIN EN 13596 |
Determination of breaking behaviour | For bitumen and bituminous binders_x000d_ Part 1: Determination of breaking value of cationic bituminous emulsions, mineral filler method |
DIN EN 13075 |
Determination of cadmium | Water quality_x000d_ Determination of cadmium by atomic absorption spectrometry |
DIN EN ISO 5961 |
Determination of cadmium, chromium, cobalt, copper, lead, manganese, nickel and zinc in aqua regia extracts of soil | Soil quality _x000d_ Flame and electrothermal atomic absorption spectrometric methods |
DIN ISO 11047 |
Determination of carbon dioxide permeability | For paints and varnishes |
DIN EN ISO 1062-6 |
Determination of certain organochlorine insecticides, polychlorinated biphenyls and chlorobenzenes | Water quality_x000d_ Gas-chromatographic method after liquid-liquid extraction |
DIN EN ISO 6468 |
Determination of change in mass and volume EN ISO 10563 | Sealants for non-structural use in joints in buildings and pedestrian walkways DIN EN 15651-1 |
EN ISO 10563 |
Determination of chemical resistance of reaction resin mortars | Grouts for tiles |
DIN EN 12808-1 |
Determination of chloride content in hardened concrete | Products and systems for the protection and repair of concrete structures - Test methods |
DIN EN 14629 |
Determination of chromium | Water quality_x000d_ Atomic absorption spectrometric methods |
DIN EN 1233 |
Determination of compatibility with asphalts pavements EN 13880-9 | EN 14188-1 |
EN 13880-9 |
Determination of composition of hardened concrete DIN EN 52170-1 | Sprayed mortal SRM according to ZTV-ING |
DIN EN 52170-1 |
Determination of compression set DIN ISO 815 | ZTV Fug-Stb 15 |
DIN ISO 815 |
Determination of compressive strength of repair mortar | Products and systems for the protection and repair of concrete structures - Test methods |
DIN EN 12190 |
Determination of cone penetration EN 13880-2 | EN 14188-1 |
EN 13880-2 |
Determination of creep in compression for repair products DIN EN 13584 | Sprayed mortal SRM according to ZTV-ING |
DIN EN 13584 |
Determination of density | EN 13880-1 (Joint fillers and sealants; EN 14188-1)_x000d_ EN ISO 2811-1 (Pycnometer; paints and varnishes)_x000d_ EN ISO 2811-2 (Immersed body; paints and varnishes)_x000d_ EN ISO 1675 (Plastics; Liquid resins; determination of density by the pyknometer method) |
EN 13880-1 DIN EN ISO 2811-1 DIN EN ISO 2811-2 DIN EN ISO 1675 |
Determination of dissolved anions by liquid chromatography of ions | Water quality_x000d_ Part 1: Determination of bromide, chloride, fluoride, nitrate, nitrite, phosphate and sulfate |
DIN EN ISO 10304-1 |
Determination of ductility | Bitumen and bituminous binders |
DIN 52013 |
Determination of dynamic mechanical properties | For plastics_x000d_ Part 2: Torsion-pendulum method |
DIN EN ISO 6721-2 |
Determination of dynamic viscosity by vacuum capillary | Bitumen and bituminous binders _x000d_ |
DIN EN 12596 |
Determination of elastic recovery of sealants EN ISO 7389 | Sealants for non-structural use in joints in buildings and pedestrian walkways DIN EN 15651-1 |
EN ISO 7389 |
Determination of electrical conductivity | For water quality |
DIN EN 27888 ISO 7888 |
Determination of epoxy equivalent | Products and systems for the protection and repair of concrete structures - Test methods; Reactive functions related to epoxy resins |
DIN EN 1877-1 |
Determination of extrudability for sealant | Buildings and civil engineering works_x000d_ Part 2: Using standardized apparatus |
DIN EN ISO 8394-2 |
Determination of flow time by use of flow cups | For Paints and varnishes |
DIN EN ISO 2431 |
Determination of form stability under cyclical temperature changes | Flexible sheets for waterproofing - Bitumen sheets for roof waterproofing |
DIN EN 1108 |
Determination of glass transition temperatures of polymers | Products and systems for the protection and repair of concrete structures - Test methods |
DIN EN 12614 |
Determination of hardness ISO 48 | ZTV Fug-Stb 15 |
ISO 48 |
Determination of heat resistance; change in penetration value EN 13880-4 | EN 14188-1 |
EN 13880-4 |
Determination of highly volatile halogenated hydrocarbons | Water quality _x000d_ Gas-chromatographic methods_x000d_ |
DIN EN ISO 10301 |
Determination of homogeneity | Primers for cold and hot applied joint sealants_x000d_ Part 1: Determination of homogeneity |
DIN EN 15466-1 |
Determination of hydrocarbon oil index | Water quality_x000d_ Part 2: Method using solvent extraction and gas chromatography |
DIN EN ISO 9377-2 |
Determination of hydroxyl value | ISO 4629 Binders for paints and varnishes_x000d_ ISO 4629-1 (Titrimetric method without using a catalyst)_x000d_ EN 1240 Adhesives_x000d_ (determination of hydroxyl value and/or hydroxyl content) |
DIN EN 1240 DIN EN ISO 4629-1 |
Determination of indentation hardness by means of a durometer EN ISO 868 | Sealants for non-structural use in joints in buildings and pedestrian walkways DIN EN 15651-1 |
EN ISO 868 |
Determination of Izod impact strength | For plastics |
DIN EN ISO 180 |
determination of Kjeldahl nitrogen | Water quality_x000d_ method after mineralization with selenium |
DIN EN 25663 |
Determination of length, width and straightness | Flexible sheets for waterproofing_x000d_ Part 1: Bitumen sheets for roof waterproofing |
EN 1848-1 |
Determination of loss of mass of hydrophobic impregnated concrete after freeze-thaw salt stress | Products and systems for the protection and repair of concrete structures_x000d_ Test method - Determination of loss of mass of hydrophobic impregnated concrete after freeze-thaw salt stress |
DIN EN 13581 |
Determination of modulus of elasticity in compression DIN EN 13412 | Sprayable polymer cerment concrete SRM according to ZTV-ING |
DIN EN 13412 |
Determination of needle penetration | For bitumen and bituminous binders |
DIN EN 1426 |
Determination of nitrate | Water quality_x000d_ Part 3 (spectrometric method using sulfosalicylic acid) |
ISO 7890 ISO 7890-3 |
determination of nitrite | Water quality_x000d_ molecular absorption spectrometric method |
DIN EN 26777 |
Determination of non-volatile-matter content | For paints, varnishes and plastics |
DIN EN ISO 3251 |
Determination of open time | Products and systems for the protection and repair of concrete structures - Test methods |
ISO 12189 |
Determination of organochlorine pesticides and polychlorinated biphenyls | Soil quality _x000d_ Gas-chromatographic method with electron capture detection |
DIN ISO 10382 |
determination of peel resistance of joints | Flexible sheets for waterproofing - Part 1: Bitumen sheets for roof waterproofing; determination of peel resistance of joints |
DIN EN 12316-1 |
Determination of penetration and recovery (resilience) EN 13880-3 | EN 14188-1 |
EN 13880-3 |
Determination of penetration power of bituminous emulsions | For Bitumen and bituminous binders |
DIN EN 12849 |
Determination of permanganate index | Water quality |
DIN EN ISO 8467 |
Determination of phenol index by flow analysis (FIA and CFA) | Water quality - Determination of phenol index by flow analysis (FIA and CFA) |
DIN EN ISO 14402 |
Determination of physical characteristics | Clay roofing tiles for discontinuous laying_x000d_ Part 2: Test for frost resistance |
DIN EN 539-2 |
Determination of pigment content | Paints and varnishes_x000d_ Part 1: Centrifuge method |
DIN EN ISO 14680-1 |
Determination of residue on sieving of bituminous emulsions, and determination of storage stability by sievin | For bitumen and bituminous binders |
DIN EN 1429 |
Determination of resistance against alkali | Primers for cold and hot applied joint sealants_x000d_ Part 2: Determination of resistance against alkali |
DIN EN 15466-2 |
Determination of resistance of capillary absorption DIN EN 13057 | Sprayable polymer cerment concrete SRM according to ZTV-ING |
DIN EN 13057 |
Determination of resistance to carbonation | Products and systems for the protection and repair of concrete structures - Test methods |
DIN EN 13295 |
Determination of resistance to dynamic water pressure after damage by pre-treatment | Flexible sheets for waterproofing_x000d_ Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles_x000d_ |
DIN EN 14694 |
Determination of resistance to flow sealants EN ISO 7390 | Sealants for non-structural use in joints in buildings and pedestrian walkways DIN EN 15651-1 |
EN ISO 7390 |
Determination of resistance to impact | Flexible sheets for waterproofing - Bitumen, plastic and rubber sheets for roof waterproofing |
DIN EN 12691 |
Determination of resistance to liquids DIN EN 2812-1 | EN 1504-2 for an impregnation |
DIN EN 2812-1 |
Determination of resistance to root penetration | Flexible sheets for waterproofing - Bitumen, plastic and rubber sheets for roof waterproofing |
DIN EN 13948 |
Determination of resistance to static loading | Flexible sheets for waterproofing - Bitumen, plastic and rubber sheets for roof waterproofing |
DIN EN 12730 |
Determination of resistance to tearing | Flexible sheets for waterproofing_x000d_ Part 1: Bitumen sheets for roof waterproofing_x000d_ Part 2: Plastic and rubber sheets for roof waterproofing |
DIN EN 12310-1 DIN EN 12310-2 |
Determination of resistance to wear by abrasive wheels | For plastics |
ISO 9352 |
Determination of roll characteristics | Rubber- or plastics-coated fabrics_x000d_ Part 3: Method for determination of thickness |
DIN EN ISO 2286-3 |
Determination of Segregation Tendency | Testing of Bituminous Materials for Road Building and Related Purposes |
DIN 1996-16 |
Determination of shear strength | Flexible sheets for waterproofing_x000d_ Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles |
DIN EN 13653 |
Determination of shrinkage and expansion DIN EN 12617-4 | Sprayed mortal SRM according to ZTV-ING |
DIN EN 12617-4 |
Determination of shrinkage and expansion DIN EN 12617-4 | Sprayable polymer cerment concrete SRM according to ZTV-ING |
DIN EN 12617-4 |
Determination of solids content and evaporation behaviour of volatiles | Primers for cold and hot applied joint sealants_x000d_ Part 3: Determination of solids content and evaporation behaviour of volatiles |
DIN EN 15466-3 |
Determination of storage stability of modified bitumen | Bitumen and bituminous binders |
DIN EN 13399 |
Determination of strength DIN EN 196-1 | Sprayable polymer cerment concrete SRM according to ZTV-ING |
DIN EN 196-1 |
Determination of stress relaxation in compression at ambient and at elevated temperatures DIN ISO 3384 | ZTV Fug-Stb 15 |
DIN ISO 3384 |
Determination of tear strength | Rubber, vulcanized or thermoplastic_x000d_ Part 1: Trouser, angle and crescent test pieces |
DIN ISO 34-1 |
Determination of temperature of deflection under load | For plastics_x000d_ ISO 75-2 (Part 2: Plastics and ebonite)_x000d_ ISO 75-3 (Part 3: High-strength thermosetting laminates and long-fibre-reinforced plastics) |
DIN EN ISO 75-2 DIN EN ISO 75-3 |
Determination of tensile properties | EN 12311-1 (flexible sheets for waterproofing; Part 1: Bitumen sheets for roof waterproofing)_x000d_ EN 527-1 (for plastics; Part 1: General principles)_x000d_ EN 527-2 (Part 2: Test conditions for moulding and extrusion plastics) |
EN 12311-1 DIN EN ISO 527-1 DIN EN ISO 527-2 |
Determination of tensile properties (Extension to break) EN ISO 8339 | Sealants for non-structural use in joints in buildings and pedestrian walkways DIN EN 15651-1 |
EN ISO 8339 |
Determination of tensile properties of sealants at maintained extension after immersion in water (4d) EN ISO 10590 | Sealants for non-structural use in joints in buildings and pedestrian walkways DIN EN 15651-1 |
EN ISO 10590 |
Determination of tensile properties of sealants at meintained extension after immersion in water EN ISO 10591 | Sealants for non-structural use in joints in buildings and pedestrian walkways DIN EN 15651-1 |
EN ISO 10591 |
Determination of tensile strength at break, tensile stress at yield, elongation at break and stress values in a tensile test | Testing of rubber |
DIN 53504 |
Determination of tensile strength development for polymers | Products and systems for the protection and repair of concrete structures - Test methods |
DIN EN 1543 |
Determination of tensile stress-strain properties ISO 37 | ZTV Fug-Stb 15 |
ISO 37 |
Determination of tension | Rubber, vulcanized or thermoplastic - Determination of tension set under constant elongation, and of tension set, elongation and creep under constant tensile load |
DIN ISO 2285 |
Determination of the adhesion conrete to concrete | Products and systems for the protection and repair of concrete structures - Test methods |
DIN EN 12636 |
Determination of the behaviour of bitumen sheets during application of mastic asphalt | Flexible sheets for waterproofing_x000d_ Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles_x000d_ |
DIN EN 14693 |
Determination of the change in weight of fuel resistance joint sealants | Hot applied joint sealants_x000d_ Part 8: Test method for the determination of the change in weight of fuel resistance joint sealants after fuel immersion |
DIN EN 13880-8 |
Determination of the Chemical Oxygen Demand (COD) | German Standard Methods for Examination of Water, Waste Water and Sludge_x000d_ DIN 38409-1 (determination of total dry residue, filtrate dry residue and residue on ignition)_x000d_ DIN 38409-2 (determination of filterable matter and the residue on ignition)_x000d_ DIN 38409-6 (summary indices of actions and substances (group H); water hardness)_x000d_ DIN 38409-7 (Parameters characterizing effects and substances (group H); Determination of acid and base-neutralizing capacities)_x000d_ DIN 38409-16 (Summary Action and Material Characteristic Parameters (Group H); determination of the phenol index)_x000d_ DIN 38409-41 (Determination of the Chemical Oxygen Demand (COD) in the Range over 15 mg/l)_x000d_ DIN 38409-44 (parameters characterizing effects and substances (group H); determination of the chemical oxygen demand (COD), ranging from 5 to 50 mg/l)_x000d_ _x000d_ |
DIN 38409-16 DIN 38409-41 DIN 38409-44 DIN 38409-1 DIN 38409-7 DIN 38409-2 DIN 38409-6 |
Determination of the discontinuous extension (adherence test) (Testing temperature: -25°C) EN 13880-13 | EN 14188-1 |
EN 13880-13 |
Determination of the discontinuous extension (adherence test) after immersion in water (Testing temperature: -25°C) EN 13880-13 | EN 14188-1 |
EN 13880-13 |
Determination of the durability of structural bonding | Products and systems for the protection and repair of concrete structures - Test methods |
DIN EN 13733 |
Determination of the effect on corrison susceptibility of reinforcing steel by potentiostatic electro-chemical test DIN EN 480-14 | Sprayable polymer cerment concrete SRM according to ZTV-ING |
DIN EN 480-14 |
Determination of the elastic recovery of modified bitumen | For bitumen and bituminous binders |
DIN EN 13398 |
Determination of the electrical resistance | Resilient, laminate and modular multilayer floor coverings |
DIN EN 1081 |
Determination of the filtration stability | Products and systems for the protection and repair of concrete structures - Test methods |
DIN EN 14497 |
Determination of the flow resistance EN 13880-5 | EN 14188-1 |
EN 13880-5 |
Determination of the Fraass breaking point | Bitumen and bituminous binders |
DIN EN 12593 |
Determination of the mechanical properties of glass fibre meshes as reinforcement for External Thermal Insulation Composite Systems with renders (ETICS) | Thermal insulation products for building applications |
DIN EN 13496 |
Determination of the pot life of multicomponent coating systems - Preparation and conditioning of samples and guidelines for testing | For paints and varnishes |
DIN EN ISO 9514 |
Determination of the resistance to compaction of an asphalt layer | Flexible sheets for waterproofing_x000d_ Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles |
DIN EN 14692 |
Determination of the resistance to hardening under influence of heat and air | Bitumen and bituminous binders_x000d_ Part 1: RTFOT method |
DIN EN 12607 |
Determination of the slip resistance by means of the pendulum tester | Natural stone test methods |
DIN EN 14231 |
Determination of the softening point - Ring and Ball method EN 1427 | EN 14188-1 |
EN 1427 |
Determination of the stickiness of rapid curing cut-backs | Bitumen and bituminous binders |
DIN 52033 |
Determination of the tensile properties of modified bitumen by the force ductility method | For bitumen and bituminous binders |
DIN EN 13589 |
Determination of the time to rupture | Adhesives - Determination of the time to rupture of bonded joints under static load |
DIN EN 15336 |
Determination of the water content | Tests for mechanical and physical properties of aggregates_x000d_ Part 5: Determination of the water content by drying in a ventilated oven_x000d_ EN 1428 Bitumen and bituminous binders - Determination of water content in bituminous emulsions - Azeotropic distillation method |
DIN EN 1097-5:2008-06 DIN EN 1428 |
Determination of thermal compatibility | Products and systems for the protection and repair of concrete structures - Test method_x000d_ Part 4: Dry thermal cycling |
DIN EN 13687-4 |
Determination of thermal compatibility DIN EN 13687-1 | Sprayable polymer cerment concrete SRM according to ZTV-ING |
DIN EN 13687-1 |
Determination of thermal compatibility DIN EN 13687-2 | Sprayed mortal SRM according to ZTV-ING |
DIN EN 13687-2 |
Determination of thermal compatibility EN 13687-1 | EN 1504-2 for an impregnation |
DIN EN 13687-1 |
Determination of thermal compatibility EN 13687-2 | EN 1504-2 for an impregnation |
EN 13687-2 |
Determination of thermal compatibility EN 13687-3 | EN 1504-2 for an impregnation |
EN 13687-3 |
Determination of thickness and mass per unit area | Flexible sheets for waterproofing_x000d_ Part 1: Bitumen sheets for roof waterproofing |
EN 1849-1 |
Determination of thixotropy of products for protection of reinforcement | Products and systems for the protection and repair of concrete structure - Test method |
DIN EN 13062 |
Determination of time of efflux | Products and systems for the protection and repair of concrete structures - Test methods - Determination of time of efflux of cementitious injection products |
DIN EN 14117 |
determination of total organic carbon (TOC) and dissolved organic carbon (DOC) | Water analysis_x000d_ Guidelines for the determination of total organic carbon (TOC) and dissolved organic carbon (DOC) |
DIN EN 1484 |
Determination of Vicat softening temperature (VST) | For plastics_x000d_ Thermoplastic materials |
DIN EN ISO 306 |
Determination of visible defects | Flexible sheets for roofing_x000d_ Part 1: Bitumen sheets for roof waterproofing |
EN 1850-1 |
Determination of water | German standard methods for the determination of water, waste water and sludge_x000d_ Jointly determinable substances (group F)_x000d_ F3 (Determination of polychlorinated biphenyls) |
DIN 38407-3 |
Determination of water absorption | EN 14223 (Flexible sheets for waterproofing_x000d_ Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles)_x000d_ EN 12808-5 (Grouts for tiles)_x000d_ |
DIN EN 12808-5 DIN EN 14223 |
Determination of water-soluble chloride content of fresh mortars DIN EN 1015-17 | Sprayable polymer cerment concrete SRM according to ZTV-ING |
DIN EN 1015-17 |
Determination of wet-scrub resistance and cleanability of coatings | For paints and varnishes |
DIN EN ISO 11998 |
Determination to tensile properties EN ISO 8339 | Sealants for non-structural use in joints in buildings and pedestrian walkways DIN EN 15651-1 |
EN ISO 8339 |
Differential scanning calorimetry DSC | For plastics_x000d_ Part 2: Determination of glass transition temperature and step height_x000d_ Part 3: Determination of temperature and enthalpy of melting and crystallization_x000d_ Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT) |
DIN EN ISO 11357-2 ISO 11357-3 ISO 11357-6 |
Dimensional stability at high temperture EN 15818 | Tests according to DIN EN 15814 |
EN 15818 |
Dimensional tolerance DIN ISO 3302-1 | ZTV Fug-Stb 15 |
DIN ISO 3302-1 |
Drying tests | For paints and varnishes_x000d_ ISO 9117-3 (Surface-drying test using ballotini) |
DIN EN ISO 9117-3 |
Elastic recovery EN ISO 7389 | Test programm according to TL Fug-StB15 and EN 14188-2 |
EN ISO 7389 |
EN 1504-2 for hydrophobic impregnations | EN 1504-2: Surface protection products and systems for concrete_x000d_ EN 13580: Water absorption and resistance to alkali for hydrophobic impregnations_x000d_ EN 13579: Drying test for hydrophobic impregnations |
EN 1504-2 EN 13579 EN 13580 |
Epoxide equivalent | For plastics; epoxide compounds; Determination of epoxide equivalent |
DIN EN ISO 3001 |
Epoxy resins - General methods of test | Binders for paints and varnishes |
DIN EN ISO 7142 |
Evaluation of the action of microorganisms | For plastics |
DIN EN ISO 846 |
Examination and determination of colour | Water quality_x000d_ Examination and determination of colour |
DIN EN ISO 7887 |
Examination of water | German standard methods for the examination of water, waste water and sludge;_x000d_ Physical and physico-chemical parameters (group C)_x000d_ C10 (Calculation of the calcit saturation of water)_x000d_ anions (group D)_x000d_ D1 (determination of chloride ions)_x000d_ D4 (determination of fluoride)_x000d_ D5 (determination of sulfate ions)_x000d_ D9 (Spectrometric determination of nitrate)_x000d_ D21 (determination of dissolved silicate by spectrometry)_x000d_ D24 (photometric determination of chromium(VI) using 1,5-diphenylcarbonohydrazide)_x000d_ D27 (Determination of sulfide by gas extraction method)_x000d_ cations (group E)_x000d_ E1 (determination of iron)_x000d_ E3 (Determination of calcium and magnesium, complexometric method)_x000d_ E6 (Determination of lead by atomic absorption spectrometry (AAS))_x000d_ E7 (determination of copper by atomic absorption spectrometry (AAS))_x000d_ E8 (Determination of zinc - Method by atomic absorption spectrometry (AAS) using an air-ethine flame)_x000d_ E11 (determination of nickel by atomic absorption spectrometry (AAS))_x000d_ E13 (determination of potassium by atomic absorption spectrometry (AAS) using an air-acetylene flame)_x000d_ E14 (determination of sodium by atomic absorption spectrometry (ASS) using an air-acetylene flame)_x000d_ E26 (determination of thallium by atomic absorption spectrometry (AAS) using electrothermal atomisation)_x000d_ E32 (Determination of iron by atomic absorption spectrometry)_x000d_ _x000d_ |
DIN 38405 DIN 38405-9 DIN 38406-6 DIN 38406-32 DIN 38406-14 DIN 38406-8 DIN 38404-10 DIN 38405-1 DIN EN 38405-24 DIN 38406-1 DIN 38406-3 DIN 38406-13 DIN 38405-27 DIN 38405-21 DIN 38405-5 DIN 38406-26 DIN 38405-4 DIN 38406-7 DIN 38406-11 |
Extension to break EN ISO 8339 | Sealants for non-structural use in joints in buildings and pedestrian walkways DIN EN 15651-1 |
EN ISO 8339 |
External two layer extruded polyethylene based coatings | Steel tubes and fittings for on and offshore pipelines |
DIN EN 10288 |
Extraction of trace elements | Soil quality_x000d_ Extraction of trace elements from soil using ammonium nitrate solution |
DIN ISO 19730 |
Extrudability for one component sealant DIN EN 8394-1 EN 28394 | Test programm according to TL Fug-StB15 and EN 14188-2 |
DIN EN 8394-1 EN 28394 |
Fire behaviour of building materials and building components | Part 1: Building materials; concepts, requirements and tests |
DIN 4102-1 |
Fire classification of construction products and building elements EN 13501-1 | EN 1504-2 for an impregnation |
DIN EN 13501-1 |
Flexibility at low temperature EN 15813 | Tests according to DIN EN 15814 |
EN 15813 |
Flexible sheets for waterproofing | Bitumen sheets for roof waterproofing_x000d_ EN 1109 (Determination of flexibility at low temperature)_x000d_ EN 1110 (Determination of flow resistance at elevated temperature)_x000d_ Bitumen, plastic and rubber sheets for roof waterprofing_x000d_ EN 1296 (Method for artificial ageing by long term exposure to elevated temperature)_x000d_ EN 1928 (Determination of watertightness)_x000d_ EN 1931 ( Determination of water vapour transmission properties) |
DIN EN 1296 DIN EN 1109 EN 1107-1 EN 1110 DIN EN 1931 DIN EN 1928 |
Flexural properties | For plastics_x000d_ Determination of flexural properties |
DIN EN ISO 178 |
Flexural strength test | Clay roofing tiles for discontinuous laying |
EN 538 |
Floor screeds | Floor screeds in building construction _x000d_ Part 2: Floor screeds and heating floor screeds on insulation layers_x000d_ Floor screeds_x000d_ Part 4: Screeds laid on separated layer |
DIN 18560-4:2012-06 DIN 18560-2:2009-09 |
Function testing of joint sealants - Cohesion for cold climate areas (optional) EN 13880-7 | EN 14188-1 |
EN 13880-7 |
Granulometry analysis DIN EN 12192-1 | Sprayable polymer cerment concrete SRM according to ZTV-ING_x000d_ Products and systems for the protection and repair of concrete structures_x000d_ Part 2: Test method for fillers for polymer bonding agents |
DIN EN 12192-2 DIN EN 12192-1 |
Guideline for European technical approval of external thermal insulation composite systems (etics) with rendering | 5.1.3.1 water adsorption (capillarity test)_x000d_ 5.1.3.3.1 Impact resistence_x000d_ 5.1.4.1.1 the bond strength between the base coat and the insulation product shall be tested_x000d_ 5.1.4.1.2 Bond strength test between adhesive (mortar or paste) and substrate_x000d_ 5.1.4.1.3 Bond strength test between adhesive (mortar or paste) and insulation product_x000d_ 5.6.7.1 Glass fibre mesh; tensile strength and elongation* of the reinforcing fabric_x000d_ C.1.1 density (pastes and liquids); C.1.2 dry extract; C.1.4 size distribution; C.2.1 ash content; C.2.2 dimensional characteristics and appearance; C.3.2 density of wet mortar; C.5.1 measurement of density (thermal insulation); C.6.3 mesh opening and number of threads |
ETAG 004 |
Ignitability of products subjected to direct impingement of flame | Reaction to fire tests_x000d_ Part 2: Single-flame source test |
DIN EN ISO 11925-2 |
Impact resistance DIN EN 6272-1 | EN 1504-2 for an impregnation |
DIN EN 6272-1 |
Infrared analysis DIN EN 1767 | Sprayable polymer cerment concrete SRM according to ZTV-ING |
DIN EN 1767 |
Infrared spectroscopy FTIR |
DIN EN 1767 SS-ISO 4650 |
|
Initial test on a surface protection system of class OS 11 a/b according to DIN V 18026 | DIN EN 1062: Dynamic crack bridging ability_x000d_ EN 1062-3: Capillary absorption and permeability to water_x000d_ EN 13036-4: Slip/skid resistance_x000d_ EN 13529: Resistance to serve chemical attack_x000d_ EN 13687-1: Freeze-thaw cycling with de-icing salt immersion_x000d_ EN 13687-2: Thunder-shower cycling (thermal shock)_x000d_ EN ISO 5470-1: Abrasion resistance_x000d_ ISO 6272-1: Impact resistance |
EN 13687-1 EN 13687-2 DIN EN 1062 EN 13529 ISO 6272-1 EN ISO 5470-1 EN 13036-4 EN 1062-3 |
Insulating glass units | Glass in building_x000d_ Part 4: Methods of test for the physical attributes of edge seal components and inserts |
DIN EN 1279-4 |
Isocyanate content | Adhesives; Determination of isocyanate content |
DIN EN 1242 |
Joint fillers and sealants - Test methods for preformed joint seals DIN EN 14840 | ZTV Fug-Stb 15 |
DIN EN 14840 |
leaching behaviour | Leaching of solid materials_x000d_ DIN 19528 (Percolation method for the joint examination of the leaching behaviour of inorganic and organic substances)_x000d_ DIN 19529 (Batch test for the examination of the leaching behaviour of inorganic and organic substances at a liquid to solid ratio of 2 l/kg) |
DIN 19529 DIN 19528 |
leaching of granular waste materials and sludges | Characterization of waste_x000d_ Leaching; Compliance test for leaching of granular waste materials and sludges - Part 4: One stage batch test at a liquid to solid ratio of 10 l/kg for materials with particle size below 10 mm (without or with limited size reduction) |
DIN EN 12457-4 |
Light microscopy / layer thicknesses | For paints and varnishes |
DIN EN ISO 2808 |
Liquid applied bridge deck waterproofing kits | ETAG 033: Test method for the determination of the behaviour of liquid applied bridge deck waterproofing kits applied on a vertical surface |
ETAG 033 EAD 030675-00-0107 |
Liquid water permeability |
DIN EN ISO 1062-3 |
|
Loss of volume EN ISO 10563 | Test programm according to TL Fug-StB15 and EN 14188-2 |
EN ISO 10563 |
Material requirements and testing | Thermoplastic waterstops for sealing joints in concrete_x000d_ Part 2: Material requirements and testing |
DIN 18541-2 |
Measurement of bond strength by pull-off DIN EN 1542 | EN 1504-2 for an impregnation |
DIN EN 1542 |
Measurement of bond strength by pull-off DIN EN 1542 | Sprayed mortal SRM according to ZTV-ING |
DIN EN 1542 |
Measurement of dynamic coefficient of friction on dry floor surfaces | Resilient, laminate and textile floor coverings |
DIN EN 13893 |
Measurement of gel time at ambient temperature | For plastics; unsaturated polyester resins |
DIN EN ISO 2535 |
Measurement of the formaldehyde concentration | Gaseous ambient air measurements - Indoor-air pollution measurements - Test gases measurements; Measurement of the formaldehyde concentration with the sulfite pararosaniline method |
VDI 3484 blatt1 |
Measurement of viscosities and flow curves by means of rotational viscometers | Viscometry; Part 1: Principles and measuring geometry |
DIN 53019-1 |
Method of testing cement | Part 2: Chemical analysis of cement_x000d_ Part 3: Determination of setting times and soundness |
DIN EN 196-2 DIN EN 196-3 |
Methods for exposure to liquid chemicals, including water | Flexible sheets for waterproofing_x000d_ Plastics and rubber sheets for roof waterproofing |
DIN EN 1847 |
Methods of conditioning before testing | For paints and varnishes |
DIN EN 1062-11 |
Methods of test for mortar for masonry | Part 3: Determination of consistence of fresh mortar (by flow table)_x000d_ Part 4: Determination of consistence of fresh mortar_x000d_ Part 6: Determination of bulk density of fresh mortar_x000d_ Part 7: Determination of air content of fresh mortar_x000d_ Part 10: Determination of dry bulk density of hardened mortar_x000d_ Part 11: Determination of flexural and compressive strength of hardened mortar_x000d_ Part 12: Determination of adhesive strength of hardened rendering and plastering mortars on substrates_x000d_ |
DIN EN 1015-7 DIN EN 1015-4 DIN EN 1015-6 DIN EN 1015-3 DIN EN 1015-10 DIN EN 1015-12 DIN EN 1015-11 |
Methods of test for screed materials | Part 4: Determination of wear resistance BCA |
DIN EN 13892-4 |
Methods of test for screed materials | Part 2: Determination of flexural and compressive strength_x000d_ Part 3: Determination of wear resistance - Böhme |
DIN EN 13892-3 DIN EN 13892-2:2003-02 |
Oilbinding agents |
DWA-A 716-1 DWA-A 716-9 DWA-A 719-10 LTwS-Nr. 27 |
|
Peeling test | Test of fusions on PE liners |
DVS 2226-3 |
Penetration depth EN 1504-2 | EN 1504-2 for an impregnation |
EN 1504-2 |
Polyisocyanate resins - General methods of test | Binders for paints and varnishes |
DIN EN ISO 11909 |
Preinsulated bonded pipe systems for directly buried hot water networks | District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Joint assembly for steel service pipes, polyurethane thermal insulation and outer casing of polyethylene |
DIN EN 489 |
Preparation of samples for testing EN 13880-6 | EN 14188-1 |
EN 13880-6 |
Principles | Thermal analysis (TA), Thermogravimetry (TG) |
DIN 51006 |
Products and systems for the protection and repair of concrete structures - Test methods - Corrosion protection test DIN EN 15183 | DIN EN 15183: Corrosion protection test_x000d_ DIN EN 15184: Shear adhesion coated steel to concrete (pull-out test) |
DIN EN 15184 DIN EN 15183 |
Products and systems for the protection and repair of concrete structures DIN EN 13412 | Sprayable polymer cerment concrete SRM according to ZTV-ING |
DIN EN 13412 |
Properties and requirements | Screed material and floor screeds - Screed materials |
DIN EN 13813 |
Pull-off test for adhesion | Paints and varnishes |
DIN EN ISO 4624 |
Rain strength of just applied sprayable jointing products | Testing of sealing compounds in building construction |
DIN 52461 |
Rapid-deformation (impact resistance) tests | Paints and varnishes_x000d_ Part 2: Falling-weight test, small-area indenter |
DIN EN ISO 6272-2 |
Rate of Cure EN 14187-1 | Test programm according to TL Fug-StB15 and EN 14188-2 |
EN 14187-1 |
Reaction to fire EN 13501-1 | Tests according to DIN EN 15814 |
EN 13501-1 |
Reduction of the thickness of the layer when fully dried EN 15819 | Tests according to DIN EN 15814 |
EN 15819 |
Requirements and test methods | ISO 179 Building hardware - Emergency exit devices operated by a lever handle or push pad, for use on escape routes_x000d_ EN 1344 Clay pavers |
ISO 179 DIN EN 1344 |
Resistance of flame EN 14187-7 | Test programm according to TL Fug-StB15 and EN 14188-2 |
EN 14187-7 |
Resistance of hydrolysis EN 14187-5 | Test programm according to TL Fug-StB15 and EN 14188-2 |
EN 14187-5 |
Resistance to compression EN15815 | Tests according to DIN EN 15814 |
EN 15815 |
Resistance to liquids |
NO STANDARD DEFINED DIN EN ISO 2812-2 DIN EN ISO 175 DIN EN ISO 2812-1 DIN EN ISO 2812-3 |
|
Resistance to ozone cracking DIN ISO 1431-1 | ZTV Fug-Stb 15 |
DIN ISO 1431-1 |
Resistance to rain EN15816 | Tests according to DIN EN 15814 |
EN 15816 |
Scanning electron microscopy with energy dispersive spectroscopy SEM/EDS | Utilizing the SEM/EDS Microscope System, we can examine micro-scale and nano-scale features with magnification up to 20,000x and detect chemical elemental composition in or on the surface of your test sample. |
Inhouse method |
Sealants - Determination of tensile properties at maintained extension EN ISO 8340 | Sealants for non-structural use in joints in buildings and pedestrian walkways DIN EN 15651-1 |
EN ISO 8340 |
Sealants for non-structural use in joints in buildings and pedestrian walkways | Part 3: Sealants for sanitary joints |
DIN EN 15651-3 |
Self-leveling properties or resistance flow EN 14187-3 EN ISO 7390 | Test programm according to TL Fug-StB15 and EN 14188-2 |
EN ISO 7390 EN 14187-3 |
Separator systems for light liquids (e. g. oil and petrol) | Part 1: Principles of product design, performance and testing, marking and quality control |
DIN EN 858-1 |
Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application | Adhesives_x000d_ Part 1: General procedure_x000d_ Part 2: Determination of volatile organic compounds_x000d_ Part 3: Determination of volatile aldehydes |
DIN EN 13999-2 DIN EN 13999-1 DIN EN 13999-3 |
Specification | Rubber hoses and hose assemblies for aircraft ground fuelling and defuelling |
DIN EN ISO 1825 |
Specification for plain and decorative linoleum on a foam backing | Resilient floor coverings |
DIN EN 686 |
Standard Practice for General Techniques for Obtaining Infrared Spectra for Qualitative Analysis |
ASTM E 1252 |
|
Standard Test Methods for Compressive Creep of Chemical-Resistant Polymer Machinery Grouts |
ASTM C 1181 |
|
suitability of structural bonding agents | Products and systems for the protection and repair of concrete structures - Test methods - Tests to measure the suitability of structural bonding agents for application to concrete surface |
DIN EN 1799 |
Suitability of water | Mixing water for concrete_x000d_ Specification for sampling, testing and assessing the suitability of water, including water recovered from processes in the concrete industry, as mixing water for concrete |
DIN EN 1008:2002-10 |
Surface protection products and systems for concrete EN 1504-2 | DIN EN 1542: Measurement of bond strength by pull-off_x000d_ DIN EN ISO 7783: Determination of water-vapour transmission properties - Cup method _x000d_ EN 1062-3: Determination of liquid water permeability_x000d_ EN 1062-6: Determination of carbon dioxide permeability_x000d_ EN 13529: Resistance to severe chemical attack_x000d_ EN ISO 5470-1: Determination of abrasion resistance |
EN 1062-6 DIN EN ISO 7783 EN 1062-3 EN 13529 EN ISO 5470-1 DIN EN 1542 |
Tack free time EN 14187-2 | Test programm according to TL Fug-StB15 and EN 14188-2 |
EN 14187-2 |
temperatures and humidities for conditioning and testing | For paints, varnishes and their raw materials |
DIN EN 23270 |
Tensile properties at maintained extension EN 8340 | Test programm according to TL Fug-StB15 and EN 14188-2 |
EN 8339 |
Tensile strength at 23°C and -20°C EN 8340 | Test programm according to TL Fug-StB15 and EN 14188-2 |
EN 8340 |
Tensile test | Testing of welded joints between panels and pipes made of thermoplastics |
DVS 2203-2 |
Terminology | Round and sawn timber_x000d_ Trilingual version |
DIN EN 844 |
Test according to ETAG 022 | EN ISO 12572: Resistance to water vapor_x000d_ PrEN 14891: Water tightness (chapter A.7)_x000d_ PrEN 1062-7: Crack bridging ability (method C 2); Resistance to heat ageing (method C 2)_x000d_ PrEN 14891: Tensile adhesion strength (chapter A 6.2); Resistance to heat ageing (chapter A 6.5)_x000d_ PrEN 14891: Resistance to water ageing (chapter A 6.3); Resistance to alkine solution (chapter A 6.9)_x000d_ EOTA WTAG 022: Thickness (annex D); Water tightness around penetrations an other details in wet room floors with flexible Substrates (annex A); Impermeability when subject to movement of the underlying meterial - tensile and shear loading (annex B); Water tightness around penetrations an other details in wet room floors with flexible Substrates (annex F) |
PrEN 14891 PrEN 1062 PrEN 1062-7 EN ISO 12572 EOTA WTAG 022 NO STANDARD DEFINED |
test method for nonwovens | For textiles_x000d_ Part 1: determination of mass per unit area_x000d_ Part 3: determination of tensile strength and elongation |
DIN EN 29073-1 DIN EN 29073-3 |
Test methods | Grout for prestressing tendons |
DIN EN 445:2008-01 |
Test methods | Products and systems for the protection and repair of concrete structures_x000d_ Part 1: Determination of linear shrinkage for polymers and surface protection systems (SPS)_x000d_ Part 2: Shrinkage of crack injection products based on polymer binder: volumetric shrinkage_x000d_ Part 3: Determination of early age linear shrinkage for structural bonding agents |
DIN EN 12617-3 DIN EN 12617-2 DIN EN 12617-1 |
Test methods for fatigue properties | Adhesives - Test methods for fatigue properties of structural adhesives in tensile shear |
DIN EN ISO 9664 |
Testing | For plastic sheets |
DIN 16726 |
Testing bonded joints | Adhesives_x000d_ Guide to the selection of standard laboratory ageing conditions for testing bonded joints |
DIN EN ISO 9142 |
Testing hardened concrete | Part 8: Depth of penetration of water under pressure |
DIN EN 12390-8 |
Testing of a liquid applied roof waterproofing kit (LARWK) according ETAG 005 part 1 and 8 | EN ISO 527: resistance to heat ageing_x000d_ TR003: water tightness_x000d_ TR004: resistance to wind loads_x000d_ TR006: resistance to heat ageing; resistance to low temperatures; resistance to dynamic indentiation_x000d_ TR007: resistance to static indentation; resistance to high temperatures _x000d_ TR008: resistance to fatigue movement - multiple crack bridging; resistance to heat ageing_x000d_ TR009: gliding surface_x000d_ TR010: UV-Radiation in the presence of moisture_x000d_ TR 011: resistance to heat ageing_x000d_ TR013: resistance to extreme low temperatures |
EOTA TR010 EOTA TR009 EOTA TR008 EOTA TR 011 EOTA TR 012 EN ISO 527 EOTA TR013 EOTA TR007 EOTA TR003 EOTA TR004 EOTA TR006 |
Testing of asphalt | DIN 1996-17 Determination of dimensional stability when heated (Nüssel deformation index)_x000d_ DIN 1996-18 Herrmann falling ball test |
DIN 1996-17 DIN 1996-18 |
Testing of bitumen and polymer bitumen sheets | bitumen and polymer bitumen sheets |
DIN 52123 |
Testing of resins, hardeners and accelerators, and catalyzed resins |
DIN 16945 |
|
Tests according to EN 14891 | Initial tensile adhesion (chapter A6.2); Tensile adhesion strength after contact with water (chapter A6.4); Tensile adhesion strength after heat ageing (chapter A6.5); Tensile adhesion strength after Freeze/thaw (chapter A6.6); Tensile adhesion strength after with lime water (chapter A6.9); Waterproofing (chapter A.7); Crack bridging ability under standard conditions (chapter A 8.2); Tensile adhesion strength after contact with chlorinated water (chapter A 6.7 or A 6.8); Crack bridging ability at low temperature (-5°C) (chapter A 8.3); Crack bridging ability at very low temperature (-20°C) (chapter A8.3) |
EN 14891 |
Tests for geometrical properties of aggregates | Part 1: Determination of particle size distribution - Sieving method |
DIN EN 933-1 |
Thermogravimetric analysis TGA |
ISO 9925-2 DIN EN ISO 11358 ISO 9925-3 |
|
Thermogravimetry (TG) of polymers DIN EN ISO 11358-1 | Sprayable polymer cerment concrete SRM according to ZTV-ING_x000d_ For plastics |
DIN EN ISO 11358-1 |
Thermogravimetry (TG) of polymers EN ISO 11358 | Sealants for non-structural use in joints in buildings and pedestrian walkways DIN EN 15651-1 |
DIN EN ISO 11358 |
Thin-layer chromatography TLC |
Inhouse method |
|
T-peel test for flexible-to-flexible bonded assemblies | Adhesives |
DIN EN ISO 11339 |
Type of product, dimensions, tolerances and markings | Welding consumables - Technical delivery conditions for filler materials and fluxes |
EN 544 |
Überdehnungschutz TP Fug-StB | ZTV Fug-Stb 15 |
TP Fug-StB |
Ultrasonic testing | Non-destructive testing of welds _x000d_ Use of automated phased array technology |
DIN EN ISO 13588 |
Units of measurement | For air quality; general aspects |
DIN ISO 4226 |
Volume and weight changes | Products and systems for the protection and repair of concrete structures - Test methods_x000d_ Volume and weight changes of injection products after air drying and water storage cycles |
DIN EN 14498 |
Water resistance EN 15817 | Tests according to DIN EN 15814 |
EN 15817 |
watertight covering kits | EAD 030352-00-0503 (liquid applied watertight covering kits for wet room floors and/or walls)_x000d_ EAD 030436-00-0503 (watertight covering kits based on flexible sheets for wet room floors and or walls)_x000d_ EAD 030437-00-0503 (watertight covering kits based on inherently watertight boards for wet room floors and or walls)_x000d_ ETAG 022-1 (Watertight covering kits for wet room floors and or walls; Part 1: liquid applied coverings with or without wearing surface; Annex D: waterproofing in liquid form: applicability and thickness of finished membrane) |
ETAG 022-1 EAD 030352-00-0503 EAD 030436-00-0503 EAD 030437-00-0503 |
Watertightness EN 15820 | Tests according to DIN EN 15814 |
EN 15820 |
Water-vapour transmission | DIN EN ISO 12572 (Hygrothermal performance of building materials and products - Determination of water vapour transmission properties - Cup method) |
DIN 53122-1 DIN EN ISO 7783 ASTM E 96 DIN EN 1931 DIN EN 13416 DIN EN ISO 12572 |
Het bepalen van de thermische_x000d_ eigenschappen en de bestandheid tegen_x000d_ verwering van toeslagmaterialen_x000d_ (magnesiumsulfaatproef)._x000d_ This European Standard describes the reference method used for type testing and in cases of dispute for assessing how an aggregate behaves when subjected to the cyclic action of immersion in magnesium sulfate, followed by oven drying.
Accredited: Yes
Capability | Description | Standard |
---|---|---|
NPR-CEN/TS 12390-9 | Het bepalen van de afschilfering bij vorst_x000d_ dooibestandheid._x000d_ CEN/TS 13290-9 describes the testing of the freeze-thaw scaling resistance of concrete both with water and with sodium chloride solution. It can be used either to compare new constituents or new concrete compositions against a constituent or a concrete composition that is known to give adequate performance in the local environment or to assess the test results against some absolute numerical values based on local experiences. Extrapolation of test results to assess different concretes, i.e. new constituents or new concrete compositions, requires an expert evaluation. There is no established correlation between the results obtained by the three test methods. All tests will clearly identify poor and good behaviour, but they differ in their assessment of marginal behaviour. The application of different acceptance limits for test results enables assessment for different degrees of exposure severity. In case of justified modifications of the test parameters, precautions might apply. Some alternative applications are described in Annex A. |
NPR-CEN/TS 12390-9 |
Beproevingsmethoden voor het bepalen van de laboratoriumreferentiedichtheid en het watergehalte - Proctorverdichting | This European Standard specifies test methods for the determination of the relationship between the water content and the dry density of hydraulically bound or unbound mixtures after compaction under specified test conditions using Proctor compaction. It allows an estimate of the mixture density that can be achieved on construction sites and provides a reference parameter for assessing the density of the compacted layer of the mixture. This European Standard applies only to unbound and hydraulically bound mixtures of aggregates used in road construction and civil engineering work. It is not applicable to soils for earthworks. The results of this test method can be used as a basis for comparing mixtures before use in road construction. The test results also allow a conclusion to be drawn as to the water content at which mixtures can be satisfactorily compacted in order to achieve a given dry density. This test is suitable for mixtures with different values of upper sieve (D) size up to 63 mm and an oversize up to 25 % by mass. |
NEN-EN 13286-2 |
Cur aanbeveling 20 | Bepalen van de hechtsterkte van mortels op beton. |
Cur aanbeveling 20 |
CUR Aanbevelingen 33 proef G | Het bepalen van de waterdoorlatendheid;_x000d_ gravimetrie_x000d_ |
CUR Aanbevelingen 33 proef G |
Methoden voor monsterneming | Bevat methoden voor het verkrijgen van monsters van toeslagmaterialen uit leveringen, bereidings- en verwerkingsinstallaties, inclusief voorraden. Het doel van de monsterneming is een verzamelmonster te verkrijgen dat representatief is voor de gemiddelde eigenschappen van de partij. De methoden die in deze norm worden gespecificeerd, zijn ook geschikt voor het verkrijgen van monstergrepen die afzonderlijk kunnen worden beproefd. Er wordt ook beschreven welke methoden voor monsterdeling kunnen worden gebruikt. De in deze norm beschreven methoden zijn alleen bruikbaar voor civieltechnische doeleinden. |
NEN-EN 932-1 |
NEN-EN 1015-10 | Bepaling van de droge volumieke massa van verharde mortel._x000d_ Specifies a method for determining the dry bulk density of hardenend mortars. It is applicable to lightweight and general purpose and thin layer mortars using specimens of regular shape. |
NEN-EN 1015-10 |
NEN-EN 1015-11 | Het bepalen van de buigtreksterkte en de_x000d_ druksterkte._x000d_ Specifies a method for determining the flexural and compressive strenght of moulded mortar specimens. |
NEN-EN 1015-11 |
NEN-EN 1097-1 | Het bepalen van de weerstand tegen_x000d_ afslijting (micro-Deval)._x000d_ This European Standard describes the reference method used for type testing and in case of dispute for determining the resistance to wear of coarse aggregates (main text) and aggregates for railway ballast (Annex A). For other purposes, in particular factory production control, other methods may be used provided that an appropriate working relationship with the reference method has been established. The sample is normally tested in a wet condition, but the test may also be carried out in a dry condition. This European Standard applies to natural, manufactured or recycled aggregates used in building or civil engineering. |
NEN-EN 1097-1 |
NEN-EN 1097-2 | Het bepalen van de bestandheid tegen_x000d_ verbrijzeling._x000d_ This European Standard describes the reference method, the Los Angeles test, used for type testing and in case of dispute (and an alternative method, the impact test) for determining the resistance to fragmentation of coarse aggregates and aggregates for railway ballast (Annex A). For other purposes, in particular factory production control, other methods may be used provided that an appropriate working relationship with the reference method has been established. This European Standard applies to natural, manufactured or recycled aggregates used in building and civil engineering. |
NEN-EN 1097-2 |
NEN-EN 1097-4 | Het bepalen van de holle ruimte;_x000d_ standaardverdichting._x000d_ This standard describes the reference method used for type testing and in cases of dispute, the determination of the voids of dry compacted filler by means of a Rigden apparatus. For other purposes, in particular factory production control, other methods may be used provided that an appropriate working relationship with the reference method has been established. The test is applicable to natural and manufactured fillers. It is used, for example to determine their bitumen carrying capacity. |
NEN-EN 1097-4 |
NEN-EN 1097-5 | Het bepalen van het watergehalte._x000d_ This standard describes the reference method used for type testing and in cases of dispute for the determination of the water content of aggregates by drying in a ventilated oven. For other purposes, in particular factory production control, other methods may be used provided that an appropriate working relationship with the reference method has been established. |
NEN-EN 1097-5 |
NEN-EN 1097-6 art. 8, 9 | Het bepalen van de deeltjesdichtheid en_x000d_ wateropname._x000d_ Pyknometer method for aggregate particles passing the 31,5 mm test sieve and retained_x000d_ on the 4 mm test sieve._x000d_ Pyknometer method for aggregate particles passing the 4 mm test sieve and retained on_x000d_ the 0,063 mm test sieve |
NEN-EN 1097-6 |
NEN-EN 1097-7 | Het bepalen van de dichtheid._x000d_ This standard describes the reference method used for type testing and in cases of dispute for the determination of the particle density of filler by means of a pyknometer. |
NEN-EN 1097-7 |
NEN-EN 1097-8 | Het bepalen van de polijstwaarden_x000d_ (PSV)._x000d_ This Standard describes the reference method used for type testing and in cases of dispute for determining the polished stone value (PSV) of a coarse aggregate used in road surfacings. For other purposes, in particular factory production control, other methods may be used provided that an appropriate working relationship with the reference method has been established. Annex A describes an optional method for the determination of the aggregate abrasion value (AAV). |
NEN-EN 1097-8 |
NEN-EN 12390-3 | Het bepalen van de druksterkte._x000d_ This European Standard specifies a method for the determination of the compressive strength of test specimens of hardened concrete. |
NEN-EN 12390-3 |
NEN-EN 12390-6 | Het bepalen van de splijttreksterkte;_x000d_ drukbelasting middels lijnlast._x000d_ This European Standard specifies a method for the determination of the tensile splitting strength of cylindrical test specimens of hardened concrete. A method using cubic or prismatic specimens is included in normative Annex A. |
NEN-EN 12390-6 |
NEN-EN 12390-7 | Het bepalen van de volumieke massa._x000d_ This European Standard specifies a method for determining the density of hardened concrete. It is applicable to lightweight, normal-weight and heavy-weight concrete. It differentiates between hardened concrete in the following states: 1) as-received; 2) water saturated; 3) oven-dried. The mass and volume of the specimen of hardened concrete are determined and the density calculated. |
NEN-EN 12390-7 |
NEN-EN 12697-1 | Gehalte aan oplosbaar bindmiddel._x000d_ This document describes test methods for the determination of the soluble binder content of samples of bituminous mixtures. The test methods described are suitable for quality control purposes during the production of plant mix and for checking compliance with a product specification. For the analysis of mixtures containing modified binders, the guidance of Annex D should be followed. |
NEN-EN 12697-1 |
NEN-EN 12697-11 | Het bepalen van de affiniteit tussen_x000d_ toeslagmateriaal en bitumen._x000d_ This European Standard specifies procedures for the determination of the affinity between aggregate and bitumen and its influence on the susceptibility of the combination to stripping. This property is intended to be of assistance to the designer for mixture design rather than as a type test. Susceptibility to stripping, as determined by these procedures, is an indirect measure of the power of a binder to adhere to various aggregates, or of various binders to adhere to a given aggregate. The procedures can also be used to evaluate the effect of moisture on a given aggregate-binder combination with or without adhesion agents including liquids, such as amines, and fillers, such as hydrated lime or cement. In the rolling bottle method, the affinity is expressed by visual registration of the degree of bitumen coverage on uncompacted bitumen-coated mineral aggregate particles after influence of mechanical stirring action in the presence of water. |
NEN-EN 12697-11 |
NEN-EN 12697-12 | Bepaling van de watergevoeligheid van bitumineuze proefstukken._x000d_ This European Standard describes three test methods for determining the effect of saturation and accelerated water conditioning. These methods can be used to evaluate the effect of moisture with or without anti-stripping additives including liquids, such as amines, and fillers, such as hydrated lime or cement: - method A uses the indirect tensile strength of cylindrical specimens of bituminous mixtures; - method B uses the compression strength of cylindrical specimens of bituminous mixtures; - method C defines the bonding value of soft asphalt mixtures 1 h after mixing, where the bonding of bitumen and aggregate can be equated to a bonding value. Method A and method B give the same result on average. However, if the slenderness of the specimens is less than 0,5, method B is not suitable. Method C is suitable for soft asphalt mixtures with bitumen of viscosity at 60 ºC of 4000 mm2/s or less, for which methods A and B are not suitable. |
NEN-EN 12697-12 |
NEN-EN 12697-2 | Bepaling van de deeltjesgrootteverdeling._x000d_ NEN-EN 12697-2 specifies a procedure for the determination of the particle size distribution of the aggregates of bituminous mixtures by sieving. The test is applicable to aggregates recovered after binder extraction in accordance with EN 12697-1 or EN 12697-39. The applicability of this European Standard is described in the product standards for bituminous mixtures. |
NEN-EN 12697-2 |
NEN-EN 12697-23 | Bepaling van de splijttreksterkte van bitumineuze proefstukken._x000d_ This European Standard specifies a test method for determining the (splitting) indirect tensile strength of cylindrical specimens of bituminous mixtures._x000d_ |
NEN-EN 12697-23 |
NEN-EN 12697-24 | Weerstand tegen vermoeiing._x000d_ This European Standard specifies the methods for characterising the fatigue of bituminous mixtures by alternative tests, including bending tests and direct and indirect tensile tests. The tests are performed on compacted bituminous material under a sinusoidal loading or other controlled loading, using different types of specimens and supports. The procedure is used to rank bituminous mixtures on the basis of resistance to fatigue, as a guide to relative performance in the pavement, to obtain data for estimating the structural behaviour in the road and to judge test data according to specifications for bituminous mixtures. Because this European Standard does not impose a particular type of testing device, the precise choice of the test conditions depends on the possibilities and the working range of the used device. For the choice of specific test conditions, the requirements of the product standards for bituminous mixtures need to be respected. The applicability of this document is described in the product standards for bituminous mixtures. Results obtained from different test methods or using different failure criteria are not assured to be comparable. |
NEN-EN 12697-24 |
NEN-EN 12697-25 | Cyclische drukproef._x000d_ NEN-EN 12697-25 specifies three test methods (A1, A2 and B) for determining the resistance of bituminous mixtures to permanent deformation by cyclic compression tests with confinement. The tests make it possible to rank various mixtures or to check on the acceptability of a given mixture. They do not allow making a quantitative prediction of rutting in the field to be made. Test methods A1 and A2 describe methods for determining the creep characteristics of bituminous mixtures by means of a uniaxial cyclic compression test with some confinement present. In this test a cylindrical test specimen is subjected to a cyclic axial stress. Method A2 is preferred for mastic asphalt and Method A1 for other asphalt mixtures. To achieve a certain confinement, the diameter of the loading platen is taken smaller than that of the test specimen. In test method A1, the test specimen is loaded by block-pulses whereas in method A2 haversine loading with rest time is applied. Test method B describes the method for determining the creep characteristics of bituminous mixtures by means of the triaxial cyclic compression test. In this test a cylindrical test specimen is subjected to a defined confining stress and a cyclic axial stress. This test is most often used for the purpose of evaluation and development of new types of mixtures. This European Standard applies to test specimens prepared in the laboratory or cored from the road. The maximum size of the aggregates is 32 mm. |
NEN-EN 12697-25 |
NEN-EN 12697-26 | Stugheid._x000d_ This European Standard specifies the methods for characterising the stiffness of bituminous mixtures by alternative tests, including bending tests and direct and indirect tensile tests. The tests are performed on compacted bituminous material under a sinusoidal loading or other controlled loading, using different types of specimens and supports. The procedure is used to rank bituminous mixtures on the basis of stiffness, as a guide to relative performance in the pavement, to obtain data for estimating the structural behaviour in the road and to judge test data according to specifications for bituminous mixtures. As this standard does not impose a particular type of testing device the precise choice of the test conditions depends on the possibilities and the working range of the used device. For the choice of specific test conditions, the requirements of the product standards for bituminous mixtures should be respected. The applicability of this document is described in the product standards for bituminous mixtures. |
NEN-EN 12697-26 |
NEN-EN 12697-36 art. 4.1 | Het bepalen van de laagdikte._x000d_ This European Standard describes two test methods for determining the thickness of a bituminous pavement. The first method describes measurements carried out on one or more cores which have been drilled from the full depth of the slab or road structure (destructive method). The second method electro-magnetic (non-destructive) measurement are used. |
NEN-EN 12697-36 |
NEN-EN 12697-5 procedure A | Het bepalen van de dichtheid van het_x000d_ mengsel zonder ingesloten lucht._x000d_ This European Standard specifies test methods for determining the maximum density of a bituminous mixture (voidless mass). It specifies a volumetric procedure, a hydrostatic procedure and a mathematical procedure. The test methods described are intended for use with loose bituminous materials containing paving grade bitumens, modified binders or other bituminous binders used for hot mix asphalt. The tests are suitable for both fresh or aged bituminous materials. |
NEN-EN 12697-5 |
NEN-EN 12697-6 procedure B en D | Het bepalen van dichtheid van het_x000d_ proefstuk met ingesloten lucht._x000d_ This European Standard describes test methods for determining the bulk density of a compacted bituminous specimen. The test methods are intended for use with laboratory compacted specimens or specimens from the pavement after placement and compacting, either by coring or sawing. This European Standard describes the following four procedures, the choice of which is used being dependent on the estimated content and accessibility of voids in the specimen: a) bulk density - dry (for specimens with a very closed surface); b) bulk density - saturated surface dry (SSD) (for specimens with a closed surface); c) bulk density - sealed specimen (for specimens with an open or coarse surface); d) bulk density by dimensions (for specimens with a regular surface and with geometric shapes, i.e. squares, rectangles, cylinders, etc.). |
NEN-EN 12697-6 |
NEN-EN 12697-8 art. 4 | Het bepalen van het gehalte aan poriën_x000d_ (holle ruimte) |
NEN-EN 12697-8 |
NEN-EN 12880, incl. BRL 1801 bijlage L | Het aantonen van schadelijke_x000d_ bestanddelen voor de reactie van cement_x000d_ met water en de aantasting van_x000d_ wapeningsstaal. |
NEN-EN 12880 |
NEN-EN 13036-4 | Oppervlak-eigenschappen van weg- en vliegveldverhardingen - Beproevingsmethoden - Deel 4: Methode voor de meting van de stroefheid van een oppervlak - De slingerproef._x000d_ This European standard describes a method for determining the slip/skid resistance of a surface using a device which remains stationary at the test location. The slip/skid resistance is measured by means of a pendulum arm. The method provides a measure of the slip/skid resistance properties of a surface either in the field or in the laboratory. This method measures the slip/skid resistance of a small area of a surface (approximately 0,01 m2). This should be considered when deciding its applicability to a surface which may have non-homogeneous surface characteristics, e.g. containing ridges or grooves, or is rough textured (exceeding 1,2 mm mean texture depth). |
NEN-EN 13036-4 |
NEN-EN 13179-2 | Het bepalen van het bitumengetal. |
NEN-EN 13179-2 |
NEN-EN 13286-47 en NEN-EN 14227-2 Annex D | Het bepalen van het draagvermogen;_x000d_ normale en verzwaarde C.B.R.-proef. |
NEN-EN 13286-47 |
NEN-EN 1338 | Betonstraatstenen._x000d_ This European Standard specifies materials, properties, requirements and test methods for unreinforced cement bound concrete paving blocks and complementary fittings. It is applicable to precast concrete paving blocks and complementary fittings for pedestrian use, vehicular use and roof coverings, e.g. footpaths, precincts, cycle tracks, car parks, roads, highways, industrial areas (including docks and harbours), aircraft pavements, bus stations, petrol filling stations. In case of regular use of studded tyres additional requirements are sometimes needed. This standard does not deal with the tactility or visibility of blocks nor with permeable blocks. This standard provides for the product marking and the evaluation of conformity of the product to this European Standard. |
NEN-EN 1338 |
NEN-EN 1338 Annex I | Het bepalen van stroefheid van betonstraatstenen._x000d_ |
NEN-EN 1338 |
NEN-EN 13383-2 | Waterbouwsteen._x000d_ Deze Europese norm specificeert de beproevingsmethoden voor natuurlijke, kunstmatige en gerecyclede toeslagmaterialen voor gebruik als waterbouwsteen. |
NEN-EN 13383-2 |
NEN-EN 1339 | Betontegels._x000d_ This European Standard specifies materials, properties, requirements and test methods for cement bound unreinforced concrete paving flags and complementary fittings. It is applicable to precast concrete paving flags and complementary fittings that are particularly for use in external trafficked paved areas and roof coverings. In case of regular use of studded tyres additional requirements are sometimes needed. This standard does not deal with the tactility or visibility of flags nor with permeable flags. This standard provides for the product marking and the evaluation of conformity of the product to this European Standard. |
NEN-EN 1339 |
NEN-EN 1339 Annex I | Het bepalen van stroefheid van betontegels. |
NEN-EN 1339 |
NEN-EN 1340 | Betonbanden._x000d_ This European Standard specifies materials, properties, requirements and test methods for unreinforced, cement bound precast concrete kerb units, channels and complementary fittings, that are for use in trafficked paved areas and roof coverings. The units are used to fulfil one or more of the following: Separation, physical or visual delineation, the provision of drainage or the containment of paved areas or other surfacing. In case of regular use of studded tyres, additional requirements are sometimes needed. This standard provides for the product marking and the evaluation of conformity of the product to this European standard. Apart from the tolerances, this standard does not include requirements for cross-sections, shapes and dimensions. This standard does not deal with the tactility or visibility of kerbs. |
NEN-EN 1340 |
NEN-EN 1340 Annex I | Het bepalen van stroefheid van betonbanden. |
NEN-EN 1340 |
NEN-EN 1367-1 | Het bepalen van de bestandheid tegen_x000d_ vriezen en dooien._x000d_ This European Standard specifies a test method which provides information on how an aggregate behaves when it is subjected to the cyclic action of freezing and thawing. |
NEN-EN 1367-1 |
NEN-EN 1367-2 | Het bepalen van de thermische_x000d_ eigenschappen en de bestandheid tegen_x000d_ verwering van toeslagmaterialen_x000d_ (magnesiumsulfaatproef)._x000d_ This European Standard describes the reference method used for type testing and in cases of dispute for assessing how an aggregate behaves when subjected to the cyclic action of immersion in magnesium sulfate, followed by oven drying. |
NEN-EN 1367-2 |
NEN-EN 1367-5 | Het bepalen van de weerstand tegen_x000d_ kortstondige verhitting._x000d_ This European Standard specifies methods for the determination of resistance to thermal shock of aggregates, subject to heating and drying in the production of hot bituminous mixtures. This standard describes the reference method use for type testing and in case of dispute. For the purpose of type testing and in case of dispute only the reference method should be used. |
NEN-EN 1367-5 |
NEN-EN 1426 | Bepaling van de naaldpenetratie._x000d_ NEN-EN 1426 specifies a method for determining the consistency of bitumen and bituminous binders. Normal procedure is described for penetrations up to (330 × 0,1) mm, but for penetrations above this value, up to (500 × 0,1) mm, different operating parameters are necessary. |
NEN-EN 1426 |
NEN-EN 1427 | Bepaling van het verwekingspunt - Ring- en kogelmethode._x000d_ NEN-EN 1427 specifies a method for the determination of the softening point of bitumen and bituminous binders in the range of 28 °C to 150 °C. Technical warning - The change from mercury thermometers to electronic temperature devices has revealed that the temperature definition in the mercury thermometer has not been precise enough to make a correct, unbiased transfer to electronic devices. Care should be taken for softening points ring and ball above 100 °C as the condition may have changed from previous practise to present days testing equipment. Below approx. 100 °C the difference in temperature readings between electronic and mercury stem thermometer is acceptable compared to the repeatability of this test methods. [Reference: ASTM E20 Group] |
NEN-EN 1427 |
NEN-EN 1436 Annex D | Het bepalen van stroefheid van wegmarkering. |
NEN-EN 1436 |
NEN-EN 1744-1 art 12 | Het bepalen van het gehalte aan in zuur_x000d_ oplosbare sulfaten._x000d_ Determination of acid soluble sulfates. |
NEN-EN 1744-1 |
NEN-EN 1744-1 art. 7 | Het bepalen van het gehalte aan_x000d_ chloride._x000d_ Determination of water-soluble chloride salts using the Volhard method. |
NEN-EN 1744-1 |
NEN-EN 1744-1 art.11 | Het bepalen van het totale gehalte aan_x000d_ zwavel._x000d_ Determination of total sulfur content. |
NEN-EN 1744-1 |
NEN-EN 1744-1 art.14.1 | Het bepalen van het gehalte aan_x000d_ reactieve ijzersulfidedeeltjes._x000d_ Examination for the presence of reactive iron sulfide particles. |
NEN-EN 1744-1 |
NEN-EN 1744-1 art.14.2 | Het bepalen van het gehalte aan lichte_x000d_ stukken materiaal._x000d_ Determination of lightweight contaminators. |
NEN-EN 1744-1 |
NEN-EN 1744-1 art.15.1 | Het bepalen van het humusgehalte_x000d_ (natronloogproef)._x000d_ Determination of potential presence of humus. |
NEN-EN 1744-1 |
NEN-EN 1744-1 art.15.2 | Het bepalen van het gehalte aan_x000d_ fulvozuur._x000d_ Determination of fulvo acid content. |
NEN-EN 1744-1 |
NEN-EN 1744-1 art.16.2 | Het bepalen van de wateroplosbaarheid._x000d_ Determination of water solubility of filler. |
NEN-EN 1744-1 |
NEN-EN 1744-4 | Het bepalen van de watergevoeligheid._x000d_ This European Standard specifies the procedure for the determination of the water susceptibility of fillers for bituminous mixtures, by separation of filler from a bitumen filler mixture. A method for the determination of water susceptibility by volume increase and loss of stability of a Marshall specimen is described in Annex A. |
NEN-EN 1744-4 |
NEN-EN 196-1 | Het vervaardigen van mortelprisma’s en_x000d_ cementmortel en het bepalen van de_x000d_ druksterkte._x000d_ This part of EN 196 describes the method for the determination of the compressive and, optionally, the flexural strength of cement mortar. The method applies to common cements and to other cements and materials, the standards for which call up this method. It may not apply to other cement types that have, for example, a very short initial setting time. The method is used for assessing whether the compressive strength of cement is in conformity with its specification and for validation testing of a CEN Standard sand, EN 196-1, or alternative compaction equipment. This part of EN 196 describes the reference equipment and procedure and allows alternative compaction equipment and procedures to be used provided that they have been validated in accordance with the appropriate provisions in this document. In the event of a dispute, only the reference equipment and procedure are used. |
196-1 |
NEN-EN 196-2 (artikelen 4.4.1, 4.4.2, 4.4.3 en 4.5.16) | Determination of loss on ignition._x000d_ Determination of sulfate._x000d_ Determination of residue insoluble in hydrochloric acid and sodium carbonate._x000d_ Determination of chloride. |
NEN-EN 196-2 |
NEN-EN 196-2 art. 4.5.17 | Determination of carbon dioxide (reference method)._x000d_ Het bepalen van het_x000d_ koolstofdioxidegehalte |
NEN-EN 196-2 |
NEN-EN 196-3 | Bepaling van begin en einde van de binding en bepaling van de vormhoudendheid._x000d_ Het bepalen van de vormhoudendheid_x000d_ (proef van Le Chatelier._x000d_ NEN-EN 196-3 specifies the methods for determining standard consistence, setting times and soundness of cements. The method applies to common cements and to other cements and materials, the standards for which call up this method. It may not apply to other cement types that have, for example, a very short initial setting time. The method is used for assessing whether the setting time and soundness of a cement is in conformity with its specification. This part of EN 196 describes the reference methods and allows the use of alternative procedures and equipment, as indicated in notes, provided that they have been calibrated against the reference methods. In the event of a dispute, only the reference equipment and procedures are used. |
NEN-EN 196-3 |
NEN-EN 459-2 art. 5.8 | Available lime._x000d_ De bepaling van het beschikbare_x000d_ kalkgehalte. |
NEN-EN 459-2 |
NEN-EN 933-1 | Het bepalen van de_x000d_ korrelgrootteverdeling._x000d_ This European Standard describes the reference washing and dry sieving method used for type testing and in case of dispute, for determination of the particle size distribution of aggregates. For other purposes, in particular factory production control, other methods may be used, provided that an appropriate working relationship with the reference method has been established. It applies to all aggregates, including lightweight aggregates, up to 90 mm nominal size, but excluding filler. |
NEN-EN 933-1 |
NEN-EN 933-10 | Het bepalen van de korrelverdeling_x000d_ (luchtstraalzeefanalyse)._x000d_ This European Standard describes the reference method used for type testing and in cases of dispute for determining the particle size distribution up to 2 mm size of natural or manufactured origin filler aggregate using air jet sieving. For other purposes, in particular factory production control, other methods may be used provided that an appropriate working relationship with the reference method has been established. |
NEN-EN 933-10 |
NEN-EN 933-11 | Het bepalen van de samenstelling_x000d_ (classificatieproef)._x000d_ This European Standard describes a simple method for the examination of coarse recycled aggregates for the purpose of identifying and estimating the relative proportions of constituent materials. This reference test method should be used for type testing and in case of dispute. For other purposes, in particular factory production control, other methods may be used provided that an appropriate working relationship with the reference method has been established. |
NEN-EN 933-11 |
NEN-EN 933-3 | Het bepalen van de korrelvorm._x000d_ This European Standard describes the reference method, used for type testing and in case of dispute, for determination of the flakiness index of aggregates. For other purposes, in particular production control, other methods may be used, provided that an appropriate working relationship with the reference method has been established. This European Standard applies to natural, manufactured or recycled aggregates. The test procedure specified in this part of this European Standard is not applicable to particle sizes less than 4 mm or greater than 100 mm. |
NEN-EN 933-3 |
NEN-EN 933-5 | Het bepalen van het percentage aan_x000d_ gebroken oppervlakken._x000d_ Specifies a method for the determination of the percentage of particles with crushed and broken surface in a sample of natural coarse aggregate. It applies to gravel or mixed aggregate containing gravel. |
NEN-EN 933-5 |
NEN-EN 933-6 art. 8 | Het bepalen van de stroomcoëfficiënt._x000d_ NEN-EN 933-6 specifies the reference method used for type testing, and in case of dispute, for determining the flow coefficient of coarse and fine aggregates. For other purposes, in particular factory production control, other methods may be used provided that an appropriate working relationship with the reference method has been established. Examples of advanced test methods can be found in the Bibliography. This European Standard applies to coarse aggregate of sizes between 4 mm and 20 mm and to fine aggregate of size up to 2 mm. |
NEN-EN 933-6 |
NEN-EN 933-7 | Het bepalen van het gehalte aan_x000d_ schelpen._x000d_ Specifies a method for the determination of shell content of coarse aggregates. It applies to gravel or mixed aggregate containing gravel. |
NEN-EN 933-7 |
NEN-EN 933-8 | Het bepalen van het gehalte aan fijn_x000d_ materiaal (zandequivalentproef)._x000d_ NEN-EN 933-8+A1 describes the reference method used for type testing and in case of dispute for the determination of the sand equivalent value of 0/2 mm fraction (for 0/4 mm, see Annex A) in fine aggregates or all-in aggregates. For other purposes, in particular factory production control, other methods may be used provided that an appropriate working relationship with the reference method has been established. |
NEN-EN 933-8 |
NEN-EN 933-9 | Het bepalen van het gehalte aan fijn_x000d_ materiaal (methyleenblauwproef)._x000d_ This standard describes the reference method used for type testing and in cases of dispute for the determination of the methylene blue value of the 0/2 mm fraction in fine aggregates or all-in aggregates (MB). It also describes the reference method for the determination of the methylene blue value of the 0/0,125 mm fraction (MBF) in Annex A. For other purposes, in particular factory production control, other methods may be used provided that an appropriate working relationship with the suitable reference method has been established. |
NEN-EN 933-9 |
proef 77.3 RAW 2015 | Het aantonen van PAK; DLC |
proef 77.3 RAW 2015 |
Proef 1 (RAW 2010; RAW 2015) | Het bepalen van de korrelverdeling (areometerproef) |
RAW proef 1 |
proef 10 (RAW 2010; RAW 2015) | Het bepalen van de éénpuntsproctor. |
RAW proef 10 |
proef 11 (RAW 2010; RAW 2015) | Het bepalen van de korrelverdeling. |
RAW proef 11 |
proef 13 (RAW 2010; RAW 2015) | Waterdoorlatendheid (normale proef) |
RAW proef 13 |
proef 14 (RAW 2010; RAW 2015) | Plasticiteit van grond. |
RAW proef 14 |
proef 15 (RAW 2010; RAW 2015) | Fijnheidsgetal. |
RAW proef 15 |
proef 18 (RAW 2010; RAW 2015) | Druksterkte van een uit een gebonden fundering geboorde cilinder. |
RAW proef 18 |
proef 19 (RAW 2010; RAW 2015) | Fulvozuurproef. |
RAW proef 19 |
proef 2 (RAW 2010; RAW 2015) | Het bepalen van het gehalte aan minerale deeltjes door zeef 63um. |
RAW proef 2 |
proef 20 (RAW 2010; RAW 2015) | pH-methode |
RAW proef 20 |
proef 28 (RAW 2010; RAW 2015) | Het bepalen van het gloeiverlies en het_x000d_ organische-stofgehalte |
RAW proef 28 |
proef 28 (RAW 2010; RAW 2015) | Gloeiverlies, organische stof en CaCo3-gehalte. |
RAW proef 28 |
proef 29 (RAW 2010; RAW 2015) | Textuurbepaling (lutumgehalte, leemgehalte en M50-cijfer). |
RAW proef 29 |
proef 3 (RAW 2010; RAW 2015) | Het bepalen van de verdichtingsgraad van aardebaan- of funderingsmateriaal. |
RAW proef 3 |
Proef 35 (RAW 2010; RAW 2015) | Het bepalen van het gehalte aan_x000d_ bestanddelen. |
RAW proef 35 |
proef 36 (RAW 2010; RAW 2015) | Gehalte aan organisch stof van grond. |
RAW proef 36 |
proef 37 (RAW 2010; RAW 2015) | Massaverlies bij zoutzuurbehandeling van grond. |
RAW proef 37 |
proef 38 (RAW 2010; RAW 2015) | Zoutgehalte van grond. |
RAW proef 38 |
Proef 53 (RAW 2010; RAW 2015) | Het bepalen van de laagdikte. |
RAW proef 53 |
proef 6 (RAW 2010; RAW 2015) | Het bepalen van de verdichting in situ;_x000d_ steekringmethode |
RAW proef 6 |
proef 64 (RAW 2010; RAW 2015) | Het bepalen van de laagdikte. |
RAW proef 64 |
proef 66 (RAW 2010; RAW 2015) | Het bepalen van de verdichtingsgraad. |
RAW proef 66 |
proef 67 (RAW 2010; RAW 2015) | Het bepalen van dichtheid van het_x000d_ proefstuk met ingesloten lucht |
RAW proef 67 |
proef 68 (RAW 2010; RAW 2015) | Het bepalen van de dichtheid van het_x000d_ mengsel zonder ingesloten lucht. |
RAW proef 68 |
proef 69 (RAW 2010; RAW 2015) | Het bepalen van het gehalte aan poriën_x000d_ (holle ruimte) |
RAW proef 69 |
proef 7 (RAW 2010; RAW 2015) | Het bepalen van dichtheid in situ;_x000d_ grindmethode |
RAW proef 7 |
proef 76 RAW 2000 | Het bepalen van stroefheid. |
RAW 2000 proef 76 |
proef 77.1 77.2 (RAW 2015) | Het aantonen van PAK (inclusief_x000d_ beschrijving van de constructieopbouw_x000d_ per gemeten laagdikte) |
RAW proef 77.1 77.2 |
Proef 79 (RAW 2010; RAW 2015) | Het bepalen van de dichtheid. |
RAW proef 79 |
proef 8 (RAW 2010; RAW 2015) | Het bepalen van de verdichting in situ;_x000d_ nucleaire methode. |
RAW proef 8 |
proef 9 (RAW 2010; RAW 2015) | Het bepalen van het verband tussen het vochtgehalte en de dichtheid (proctorproef) |
RAW proef 9 |
Het bepalen van de weerstand tegen_x000d_ kortstondige verhitting._x000d_ This European Standard specifies methods for the determination of resistance to thermal shock of aggregates, subject to heating and drying in the production of hot bituminous mixtures. This standard describes the reference method use for type testing and in case of dispute. For the purpose of type testing and in case of dispute only the reference method should be used.
Accredited: Yes
Capability | Description | Standard |
---|---|---|
NPR-CEN/TS 12390-9 | Het bepalen van de afschilfering bij vorst_x000d_ dooibestandheid._x000d_ CEN/TS 13290-9 describes the testing of the freeze-thaw scaling resistance of concrete both with water and with sodium chloride solution. It can be used either to compare new constituents or new concrete compositions against a constituent or a concrete composition that is known to give adequate performance in the local environment or to assess the test results against some absolute numerical values based on local experiences. Extrapolation of test results to assess different concretes, i.e. new constituents or new concrete compositions, requires an expert evaluation. There is no established correlation between the results obtained by the three test methods. All tests will clearly identify poor and good behaviour, but they differ in their assessment of marginal behaviour. The application of different acceptance limits for test results enables assessment for different degrees of exposure severity. In case of justified modifications of the test parameters, precautions might apply. Some alternative applications are described in Annex A. |
NPR-CEN/TS 12390-9 |
Beproevingsmethoden voor het bepalen van de laboratoriumreferentiedichtheid en het watergehalte - Proctorverdichting | This European Standard specifies test methods for the determination of the relationship between the water content and the dry density of hydraulically bound or unbound mixtures after compaction under specified test conditions using Proctor compaction. It allows an estimate of the mixture density that can be achieved on construction sites and provides a reference parameter for assessing the density of the compacted layer of the mixture. This European Standard applies only to unbound and hydraulically bound mixtures of aggregates used in road construction and civil engineering work. It is not applicable to soils for earthworks. The results of this test method can be used as a basis for comparing mixtures before use in road construction. The test results also allow a conclusion to be drawn as to the water content at which mixtures can be satisfactorily compacted in order to achieve a given dry density. This test is suitable for mixtures with different values of upper sieve (D) size up to 63 mm and an oversize up to 25 % by mass. |
NEN-EN 13286-2 |
Cur aanbeveling 20 | Bepalen van de hechtsterkte van mortels op beton. |
Cur aanbeveling 20 |
CUR Aanbevelingen 33 proef G | Het bepalen van de waterdoorlatendheid;_x000d_ gravimetrie_x000d_ |
CUR Aanbevelingen 33 proef G |
Methoden voor monsterneming | Bevat methoden voor het verkrijgen van monsters van toeslagmaterialen uit leveringen, bereidings- en verwerkingsinstallaties, inclusief voorraden. Het doel van de monsterneming is een verzamelmonster te verkrijgen dat representatief is voor de gemiddelde eigenschappen van de partij. De methoden die in deze norm worden gespecificeerd, zijn ook geschikt voor het verkrijgen van monstergrepen die afzonderlijk kunnen worden beproefd. Er wordt ook beschreven welke methoden voor monsterdeling kunnen worden gebruikt. De in deze norm beschreven methoden zijn alleen bruikbaar voor civieltechnische doeleinden. |
NEN-EN 932-1 |
NEN-EN 1015-10 | Bepaling van de droge volumieke massa van verharde mortel._x000d_ Specifies a method for determining the dry bulk density of hardenend mortars. It is applicable to lightweight and general purpose and thin layer mortars using specimens of regular shape. |
NEN-EN 1015-10 |
NEN-EN 1015-11 | Het bepalen van de buigtreksterkte en de_x000d_ druksterkte._x000d_ Specifies a method for determining the flexural and compressive strenght of moulded mortar specimens. |
NEN-EN 1015-11 |
NEN-EN 1097-1 | Het bepalen van de weerstand tegen_x000d_ afslijting (micro-Deval)._x000d_ This European Standard describes the reference method used for type testing and in case of dispute for determining the resistance to wear of coarse aggregates (main text) and aggregates for railway ballast (Annex A). For other purposes, in particular factory production control, other methods may be used provided that an appropriate working relationship with the reference method has been established. The sample is normally tested in a wet condition, but the test may also be carried out in a dry condition. This European Standard applies to natural, manufactured or recycled aggregates used in building or civil engineering. |
NEN-EN 1097-1 |
NEN-EN 1097-2 | Het bepalen van de bestandheid tegen_x000d_ verbrijzeling._x000d_ This European Standard describes the reference method, the Los Angeles test, used for type testing and in case of dispute (and an alternative method, the impact test) for determining the resistance to fragmentation of coarse aggregates and aggregates for railway ballast (Annex A). For other purposes, in particular factory production control, other methods may be used provided that an appropriate working relationship with the reference method has been established. This European Standard applies to natural, manufactured or recycled aggregates used in building and civil engineering. |
NEN-EN 1097-2 |
NEN-EN 1097-4 | Het bepalen van de holle ruimte;_x000d_ standaardverdichting._x000d_ This standard describes the reference method used for type testing and in cases of dispute, the determination of the voids of dry compacted filler by means of a Rigden apparatus. For other purposes, in particular factory production control, other methods may be used provided that an appropriate working relationship with the reference method has been established. The test is applicable to natural and manufactured fillers. It is used, for example to determine their bitumen carrying capacity. |
NEN-EN 1097-4 |
NEN-EN 1097-5 | Het bepalen van het watergehalte._x000d_ This standard describes the reference method used for type testing and in cases of dispute for the determination of the water content of aggregates by drying in a ventilated oven. For other purposes, in particular factory production control, other methods may be used provided that an appropriate working relationship with the reference method has been established. |
NEN-EN 1097-5 |
NEN-EN 1097-6 art. 8, 9 | Het bepalen van de deeltjesdichtheid en_x000d_ wateropname._x000d_ Pyknometer method for aggregate particles passing the 31,5 mm test sieve and retained_x000d_ on the 4 mm test sieve._x000d_ Pyknometer method for aggregate particles passing the 4 mm test sieve and retained on_x000d_ the 0,063 mm test sieve |
NEN-EN 1097-6 |
NEN-EN 1097-7 | Het bepalen van de dichtheid._x000d_ This standard describes the reference method used for type testing and in cases of dispute for the determination of the particle density of filler by means of a pyknometer. |
NEN-EN 1097-7 |
NEN-EN 1097-8 | Het bepalen van de polijstwaarden_x000d_ (PSV)._x000d_ This Standard describes the reference method used for type testing and in cases of dispute for determining the polished stone value (PSV) of a coarse aggregate used in road surfacings. For other purposes, in particular factory production control, other methods may be used provided that an appropriate working relationship with the reference method has been established. Annex A describes an optional method for the determination of the aggregate abrasion value (AAV). |
NEN-EN 1097-8 |
NEN-EN 12390-3 | Het bepalen van de druksterkte._x000d_ This European Standard specifies a method for the determination of the compressive strength of test specimens of hardened concrete. |
NEN-EN 12390-3 |
NEN-EN 12390-6 | Het bepalen van de splijttreksterkte;_x000d_ drukbelasting middels lijnlast._x000d_ This European Standard specifies a method for the determination of the tensile splitting strength of cylindrical test specimens of hardened concrete. A method using cubic or prismatic specimens is included in normative Annex A. |
NEN-EN 12390-6 |
NEN-EN 12390-7 | Het bepalen van de volumieke massa._x000d_ This European Standard specifies a method for determining the density of hardened concrete. It is applicable to lightweight, normal-weight and heavy-weight concrete. It differentiates between hardened concrete in the following states: 1) as-received; 2) water saturated; 3) oven-dried. The mass and volume of the specimen of hardened concrete are determined and the density calculated. |
NEN-EN 12390-7 |
NEN-EN 12697-1 | Gehalte aan oplosbaar bindmiddel._x000d_ This document describes test methods for the determination of the soluble binder content of samples of bituminous mixtures. The test methods described are suitable for quality control purposes during the production of plant mix and for checking compliance with a product specification. For the analysis of mixtures containing modified binders, the guidance of Annex D should be followed. |
NEN-EN 12697-1 |
NEN-EN 12697-11 | Het bepalen van de affiniteit tussen_x000d_ toeslagmateriaal en bitumen._x000d_ This European Standard specifies procedures for the determination of the affinity between aggregate and bitumen and its influence on the susceptibility of the combination to stripping. This property is intended to be of assistance to the designer for mixture design rather than as a type test. Susceptibility to stripping, as determined by these procedures, is an indirect measure of the power of a binder to adhere to various aggregates, or of various binders to adhere to a given aggregate. The procedures can also be used to evaluate the effect of moisture on a given aggregate-binder combination with or without adhesion agents including liquids, such as amines, and fillers, such as hydrated lime or cement. In the rolling bottle method, the affinity is expressed by visual registration of the degree of bitumen coverage on uncompacted bitumen-coated mineral aggregate particles after influence of mechanical stirring action in the presence of water. |
NEN-EN 12697-11 |
NEN-EN 12697-12 | Bepaling van de watergevoeligheid van bitumineuze proefstukken._x000d_ This European Standard describes three test methods for determining the effect of saturation and accelerated water conditioning. These methods can be used to evaluate the effect of moisture with or without anti-stripping additives including liquids, such as amines, and fillers, such as hydrated lime or cement: - method A uses the indirect tensile strength of cylindrical specimens of bituminous mixtures; - method B uses the compression strength of cylindrical specimens of bituminous mixtures; - method C defines the bonding value of soft asphalt mixtures 1 h after mixing, where the bonding of bitumen and aggregate can be equated to a bonding value. Method A and method B give the same result on average. However, if the slenderness of the specimens is less than 0,5, method B is not suitable. Method C is suitable for soft asphalt mixtures with bitumen of viscosity at 60 ºC of 4000 mm2/s or less, for which methods A and B are not suitable. |
NEN-EN 12697-12 |
NEN-EN 12697-2 | Bepaling van de deeltjesgrootteverdeling._x000d_ NEN-EN 12697-2 specifies a procedure for the determination of the particle size distribution of the aggregates of bituminous mixtures by sieving. The test is applicable to aggregates recovered after binder extraction in accordance with EN 12697-1 or EN 12697-39. The applicability of this European Standard is described in the product standards for bituminous mixtures. |
NEN-EN 12697-2 |
NEN-EN 12697-23 | Bepaling van de splijttreksterkte van bitumineuze proefstukken._x000d_ This European Standard specifies a test method for determining the (splitting) indirect tensile strength of cylindrical specimens of bituminous mixtures._x000d_ |
NEN-EN 12697-23 |
NEN-EN 12697-24 | Weerstand tegen vermoeiing._x000d_ This European Standard specifies the methods for characterising the fatigue of bituminous mixtures by alternative tests, including bending tests and direct and indirect tensile tests. The tests are performed on compacted bituminous material under a sinusoidal loading or other controlled loading, using different types of specimens and supports. The procedure is used to rank bituminous mixtures on the basis of resistance to fatigue, as a guide to relative performance in the pavement, to obtain data for estimating the structural behaviour in the road and to judge test data according to specifications for bituminous mixtures. Because this European Standard does not impose a particular type of testing device, the precise choice of the test conditions depends on the possibilities and the working range of the used device. For the choice of specific test conditions, the requirements of the product standards for bituminous mixtures need to be respected. The applicability of this document is described in the product standards for bituminous mixtures. Results obtained from different test methods or using different failure criteria are not assured to be comparable. |
NEN-EN 12697-24 |
NEN-EN 12697-25 | Cyclische drukproef._x000d_ NEN-EN 12697-25 specifies three test methods (A1, A2 and B) for determining the resistance of bituminous mixtures to permanent deformation by cyclic compression tests with confinement. The tests make it possible to rank various mixtures or to check on the acceptability of a given mixture. They do not allow making a quantitative prediction of rutting in the field to be made. Test methods A1 and A2 describe methods for determining the creep characteristics of bituminous mixtures by means of a uniaxial cyclic compression test with some confinement present. In this test a cylindrical test specimen is subjected to a cyclic axial stress. Method A2 is preferred for mastic asphalt and Method A1 for other asphalt mixtures. To achieve a certain confinement, the diameter of the loading platen is taken smaller than that of the test specimen. In test method A1, the test specimen is loaded by block-pulses whereas in method A2 haversine loading with rest time is applied. Test method B describes the method for determining the creep characteristics of bituminous mixtures by means of the triaxial cyclic compression test. In this test a cylindrical test specimen is subjected to a defined confining stress and a cyclic axial stress. This test is most often used for the purpose of evaluation and development of new types of mixtures. This European Standard applies to test specimens prepared in the laboratory or cored from the road. The maximum size of the aggregates is 32 mm. |
NEN-EN 12697-25 |
NEN-EN 12697-26 | Stugheid._x000d_ This European Standard specifies the methods for characterising the stiffness of bituminous mixtures by alternative tests, including bending tests and direct and indirect tensile tests. The tests are performed on compacted bituminous material under a sinusoidal loading or other controlled loading, using different types of specimens and supports. The procedure is used to rank bituminous mixtures on the basis of stiffness, as a guide to relative performance in the pavement, to obtain data for estimating the structural behaviour in the road and to judge test data according to specifications for bituminous mixtures. As this standard does not impose a particular type of testing device the precise choice of the test conditions depends on the possibilities and the working range of the used device. For the choice of specific test conditions, the requirements of the product standards for bituminous mixtures should be respected. The applicability of this document is described in the product standards for bituminous mixtures. |
NEN-EN 12697-26 |
NEN-EN 12697-36 art. 4.1 | Het bepalen van de laagdikte._x000d_ This European Standard describes two test methods for determining the thickness of a bituminous pavement. The first method describes measurements carried out on one or more cores which have been drilled from the full depth of the slab or road structure (destructive method). The second method electro-magnetic (non-destructive) measurement are used. |
NEN-EN 12697-36 |
NEN-EN 12697-5 procedure A | Het bepalen van de dichtheid van het_x000d_ mengsel zonder ingesloten lucht._x000d_ This European Standard specifies test methods for determining the maximum density of a bituminous mixture (voidless mass). It specifies a volumetric procedure, a hydrostatic procedure and a mathematical procedure. The test methods described are intended for use with loose bituminous materials containing paving grade bitumens, modified binders or other bituminous binders used for hot mix asphalt. The tests are suitable for both fresh or aged bituminous materials. |
NEN-EN 12697-5 |
NEN-EN 12697-6 procedure B en D | Het bepalen van dichtheid van het_x000d_ proefstuk met ingesloten lucht._x000d_ This European Standard describes test methods for determining the bulk density of a compacted bituminous specimen. The test methods are intended for use with laboratory compacted specimens or specimens from the pavement after placement and compacting, either by coring or sawing. This European Standard describes the following four procedures, the choice of which is used being dependent on the estimated content and accessibility of voids in the specimen: a) bulk density - dry (for specimens with a very closed surface); b) bulk density - saturated surface dry (SSD) (for specimens with a closed surface); c) bulk density - sealed specimen (for specimens with an open or coarse surface); d) bulk density by dimensions (for specimens with a regular surface and with geometric shapes, i.e. squares, rectangles, cylinders, etc.). |
NEN-EN 12697-6 |
NEN-EN 12697-8 art. 4 | Het bepalen van het gehalte aan poriën_x000d_ (holle ruimte) |
NEN-EN 12697-8 |
NEN-EN 12880, incl. BRL 1801 bijlage L | Het aantonen van schadelijke_x000d_ bestanddelen voor de reactie van cement_x000d_ met water en de aantasting van_x000d_ wapeningsstaal. |
NEN-EN 12880 |
NEN-EN 13036-4 | Oppervlak-eigenschappen van weg- en vliegveldverhardingen - Beproevingsmethoden - Deel 4: Methode voor de meting van de stroefheid van een oppervlak - De slingerproef._x000d_ This European standard describes a method for determining the slip/skid resistance of a surface using a device which remains stationary at the test location. The slip/skid resistance is measured by means of a pendulum arm. The method provides a measure of the slip/skid resistance properties of a surface either in the field or in the laboratory. This method measures the slip/skid resistance of a small area of a surface (approximately 0,01 m2). This should be considered when deciding its applicability to a surface which may have non-homogeneous surface characteristics, e.g. containing ridges or grooves, or is rough textured (exceeding 1,2 mm mean texture depth). |
NEN-EN 13036-4 |
NEN-EN 13179-2 | Het bepalen van het bitumengetal. |
NEN-EN 13179-2 |
NEN-EN 13286-47 en NEN-EN 14227-2 Annex D | Het bepalen van het draagvermogen;_x000d_ normale en verzwaarde C.B.R.-proef. |
NEN-EN 13286-47 |
NEN-EN 1338 | Betonstraatstenen._x000d_ This European Standard specifies materials, properties, requirements and test methods for unreinforced cement bound concrete paving blocks and complementary fittings. It is applicable to precast concrete paving blocks and complementary fittings for pedestrian use, vehicular use and roof coverings, e.g. footpaths, precincts, cycle tracks, car parks, roads, highways, industrial areas (including docks and harbours), aircraft pavements, bus stations, petrol filling stations. In case of regular use of studded tyres additional requirements are sometimes needed. This standard does not deal with the tactility or visibility of blocks nor with permeable blocks. This standard provides for the product marking and the evaluation of conformity of the product to this European Standard. |
NEN-EN 1338 |
NEN-EN 1338 Annex I | Het bepalen van stroefheid van betonstraatstenen._x000d_ |
NEN-EN 1338 |
NEN-EN 13383-2 | Waterbouwsteen._x000d_ Deze Europese norm specificeert de beproevingsmethoden voor natuurlijke, kunstmatige en gerecyclede toeslagmaterialen voor gebruik als waterbouwsteen. |
NEN-EN 13383-2 |
NEN-EN 1339 | Betontegels._x000d_ This European Standard specifies materials, properties, requirements and test methods for cement bound unreinforced concrete paving flags and complementary fittings. It is applicable to precast concrete paving flags and complementary fittings that are particularly for use in external trafficked paved areas and roof coverings. In case of regular use of studded tyres additional requirements are sometimes needed. This standard does not deal with the tactility or visibility of flags nor with permeable flags. This standard provides for the product marking and the evaluation of conformity of the product to this European Standard. |
NEN-EN 1339 |
NEN-EN 1339 Annex I | Het bepalen van stroefheid van betontegels. |
NEN-EN 1339 |
NEN-EN 1340 | Betonbanden._x000d_ This European Standard specifies materials, properties, requirements and test methods for unreinforced, cement bound precast concrete kerb units, channels and complementary fittings, that are for use in trafficked paved areas and roof coverings. The units are used to fulfil one or more of the following: Separation, physical or visual delineation, the provision of drainage or the containment of paved areas or other surfacing. In case of regular use of studded tyres, additional requirements are sometimes needed. This standard provides for the product marking and the evaluation of conformity of the product to this European standard. Apart from the tolerances, this standard does not include requirements for cross-sections, shapes and dimensions. This standard does not deal with the tactility or visibility of kerbs. |
NEN-EN 1340 |
NEN-EN 1340 Annex I | Het bepalen van stroefheid van betonbanden. |
NEN-EN 1340 |
NEN-EN 1367-1 | Het bepalen van de bestandheid tegen_x000d_ vriezen en dooien._x000d_ This European Standard specifies a test method which provides information on how an aggregate behaves when it is subjected to the cyclic action of freezing and thawing. |
NEN-EN 1367-1 |
NEN-EN 1367-2 | Het bepalen van de thermische_x000d_ eigenschappen en de bestandheid tegen_x000d_ verwering van toeslagmaterialen_x000d_ (magnesiumsulfaatproef)._x000d_ This European Standard describes the reference method used for type testing and in cases of dispute for assessing how an aggregate behaves when subjected to the cyclic action of immersion in magnesium sulfate, followed by oven drying. |
NEN-EN 1367-2 |
NEN-EN 1367-5 | Het bepalen van de weerstand tegen_x000d_ kortstondige verhitting._x000d_ This European Standard specifies methods for the determination of resistance to thermal shock of aggregates, subject to heating and drying in the production of hot bituminous mixtures. This standard describes the reference method use for type testing and in case of dispute. For the purpose of type testing and in case of dispute only the reference method should be used. |
NEN-EN 1367-5 |
NEN-EN 1426 | Bepaling van de naaldpenetratie._x000d_ NEN-EN 1426 specifies a method for determining the consistency of bitumen and bituminous binders. Normal procedure is described for penetrations up to (330 × 0,1) mm, but for penetrations above this value, up to (500 × 0,1) mm, different operating parameters are necessary. |
NEN-EN 1426 |
NEN-EN 1427 | Bepaling van het verwekingspunt - Ring- en kogelmethode._x000d_ NEN-EN 1427 specifies a method for the determination of the softening point of bitumen and bituminous binders in the range of 28 °C to 150 °C. Technical warning - The change from mercury thermometers to electronic temperature devices has revealed that the temperature definition in the mercury thermometer has not been precise enough to make a correct, unbiased transfer to electronic devices. Care should be taken for softening points ring and ball above 100 °C as the condition may have changed from previous practise to present days testing equipment. Below approx. 100 °C the difference in temperature readings between electronic and mercury stem thermometer is acceptable compared to the repeatability of this test methods. [Reference: ASTM E20 Group] |
NEN-EN 1427 |
NEN-EN 1436 Annex D | Het bepalen van stroefheid van wegmarkering. |
NEN-EN 1436 |
NEN-EN 1744-1 art 12 | Het bepalen van het gehalte aan in zuur_x000d_ oplosbare sulfaten._x000d_ Determination of acid soluble sulfates. |
NEN-EN 1744-1 |
NEN-EN 1744-1 art. 7 | Het bepalen van het gehalte aan_x000d_ chloride._x000d_ Determination of water-soluble chloride salts using the Volhard method. |
NEN-EN 1744-1 |
NEN-EN 1744-1 art.11 | Het bepalen van het totale gehalte aan_x000d_ zwavel._x000d_ Determination of total sulfur content. |
NEN-EN 1744-1 |
NEN-EN 1744-1 art.14.1 | Het bepalen van het gehalte aan_x000d_ reactieve ijzersulfidedeeltjes._x000d_ Examination for the presence of reactive iron sulfide particles. |
NEN-EN 1744-1 |
NEN-EN 1744-1 art.14.2 | Het bepalen van het gehalte aan lichte_x000d_ stukken materiaal._x000d_ Determination of lightweight contaminators. |
NEN-EN 1744-1 |
NEN-EN 1744-1 art.15.1 | Het bepalen van het humusgehalte_x000d_ (natronloogproef)._x000d_ Determination of potential presence of humus. |
NEN-EN 1744-1 |
NEN-EN 1744-1 art.15.2 | Het bepalen van het gehalte aan_x000d_ fulvozuur._x000d_ Determination of fulvo acid content. |
NEN-EN 1744-1 |
NEN-EN 1744-1 art.16.2 | Het bepalen van de wateroplosbaarheid._x000d_ Determination of water solubility of filler. |
NEN-EN 1744-1 |
NEN-EN 1744-4 | Het bepalen van de watergevoeligheid._x000d_ This European Standard specifies the procedure for the determination of the water susceptibility of fillers for bituminous mixtures, by separation of filler from a bitumen filler mixture. A method for the determination of water susceptibility by volume increase and loss of stability of a Marshall specimen is described in Annex A. |
NEN-EN 1744-4 |
NEN-EN 196-1 | Het vervaardigen van mortelprisma’s en_x000d_ cementmortel en het bepalen van de_x000d_ druksterkte._x000d_ This part of EN 196 describes the method for the determination of the compressive and, optionally, the flexural strength of cement mortar. The method applies to common cements and to other cements and materials, the standards for which call up this method. It may not apply to other cement types that have, for example, a very short initial setting time. The method is used for assessing whether the compressive strength of cement is in conformity with its specification and for validation testing of a CEN Standard sand, EN 196-1, or alternative compaction equipment. This part of EN 196 describes the reference equipment and procedure and allows alternative compaction equipment and procedures to be used provided that they have been validated in accordance with the appropriate provisions in this document. In the event of a dispute, only the reference equipment and procedure are used. |
196-1 |
NEN-EN 196-2 (artikelen 4.4.1, 4.4.2, 4.4.3 en 4.5.16) | Determination of loss on ignition._x000d_ Determination of sulfate._x000d_ Determination of residue insoluble in hydrochloric acid and sodium carbonate._x000d_ Determination of chloride. |
NEN-EN 196-2 |
NEN-EN 196-2 art. 4.5.17 | Determination of carbon dioxide (reference method)._x000d_ Het bepalen van het_x000d_ koolstofdioxidegehalte |
NEN-EN 196-2 |
NEN-EN 196-3 | Bepaling van begin en einde van de binding en bepaling van de vormhoudendheid._x000d_ Het bepalen van de vormhoudendheid_x000d_ (proef van Le Chatelier._x000d_ NEN-EN 196-3 specifies the methods for determining standard consistence, setting times and soundness of cements. The method applies to common cements and to other cements and materials, the standards for which call up this method. It may not apply to other cement types that have, for example, a very short initial setting time. The method is used for assessing whether the setting time and soundness of a cement is in conformity with its specification. This part of EN 196 describes the reference methods and allows the use of alternative procedures and equipment, as indicated in notes, provided that they have been calibrated against the reference methods. In the event of a dispute, only the reference equipment and procedures are used. |
NEN-EN 196-3 |
NEN-EN 459-2 art. 5.8 | Available lime._x000d_ De bepaling van het beschikbare_x000d_ kalkgehalte. |
NEN-EN 459-2 |
NEN-EN 933-1 | Het bepalen van de_x000d_ korrelgrootteverdeling._x000d_ This European Standard describes the reference washing and dry sieving method used for type testing and in case of dispute, for determination of the particle size distribution of aggregates. For other purposes, in particular factory production control, other methods may be used, provided that an appropriate working relationship with the reference method has been established. It applies to all aggregates, including lightweight aggregates, up to 90 mm nominal size, but excluding filler. |
NEN-EN 933-1 |
NEN-EN 933-10 | Het bepalen van de korrelverdeling_x000d_ (luchtstraalzeefanalyse)._x000d_ This European Standard describes the reference method used for type testing and in cases of dispute for determining the particle size distribution up to 2 mm size of natural or manufactured origin filler aggregate using air jet sieving. For other purposes, in particular factory production control, other methods may be used provided that an appropriate working relationship with the reference method has been established. |
NEN-EN 933-10 |
NEN-EN 933-11 | Het bepalen van de samenstelling_x000d_ (classificatieproef)._x000d_ This European Standard describes a simple method for the examination of coarse recycled aggregates for the purpose of identifying and estimating the relative proportions of constituent materials. This reference test method should be used for type testing and in case of dispute. For other purposes, in particular factory production control, other methods may be used provided that an appropriate working relationship with the reference method has been established. |
NEN-EN 933-11 |
NEN-EN 933-3 | Het bepalen van de korrelvorm._x000d_ This European Standard describes the reference method, used for type testing and in case of dispute, for determination of the flakiness index of aggregates. For other purposes, in particular production control, other methods may be used, provided that an appropriate working relationship with the reference method has been established. This European Standard applies to natural, manufactured or recycled aggregates. The test procedure specified in this part of this European Standard is not applicable to particle sizes less than 4 mm or greater than 100 mm. |
NEN-EN 933-3 |
NEN-EN 933-5 | Het bepalen van het percentage aan_x000d_ gebroken oppervlakken._x000d_ Specifies a method for the determination of the percentage of particles with crushed and broken surface in a sample of natural coarse aggregate. It applies to gravel or mixed aggregate containing gravel. |
NEN-EN 933-5 |
NEN-EN 933-6 art. 8 | Het bepalen van de stroomcoëfficiënt._x000d_ NEN-EN 933-6 specifies the reference method used for type testing, and in case of dispute, for determining the flow coefficient of coarse and fine aggregates. For other purposes, in particular factory production control, other methods may be used provided that an appropriate working relationship with the reference method has been established. Examples of advanced test methods can be found in the Bibliography. This European Standard applies to coarse aggregate of sizes between 4 mm and 20 mm and to fine aggregate of size up to 2 mm. |
NEN-EN 933-6 |
NEN-EN 933-7 | Het bepalen van het gehalte aan_x000d_ schelpen._x000d_ Specifies a method for the determination of shell content of coarse aggregates. It applies to gravel or mixed aggregate containing gravel. |
NEN-EN 933-7 |
NEN-EN 933-8 | Het bepalen van het gehalte aan fijn_x000d_ materiaal (zandequivalentproef)._x000d_ NEN-EN 933-8+A1 describes the reference method used for type testing and in case of dispute for the determination of the sand equivalent value of 0/2 mm fraction (for 0/4 mm, see Annex A) in fine aggregates or all-in aggregates. For other purposes, in particular factory production control, other methods may be used provided that an appropriate working relationship with the reference method has been established. |
NEN-EN 933-8 |
NEN-EN 933-9 | Het bepalen van het gehalte aan fijn_x000d_ materiaal (methyleenblauwproef)._x000d_ This standard describes the reference method used for type testing and in cases of dispute for the determination of the methylene blue value of the 0/2 mm fraction in fine aggregates or all-in aggregates (MB). It also describes the reference method for the determination of the methylene blue value of the 0/0,125 mm fraction (MBF) in Annex A. For other purposes, in particular factory production control, other methods may be used provided that an appropriate working relationship with the suitable reference method has been established. |
NEN-EN 933-9 |
proef 77.3 RAW 2015 | Het aantonen van PAK; DLC |
proef 77.3 RAW 2015 |
Proef 1 (RAW 2010; RAW 2015) | Het bepalen van de korrelverdeling (areometerproef) |
RAW proef 1 |
proef 10 (RAW 2010; RAW 2015) | Het bepalen van de éénpuntsproctor. |
RAW proef 10 |
proef 11 (RAW 2010; RAW 2015) | Het bepalen van de korrelverdeling. |
RAW proef 11 |
proef 13 (RAW 2010; RAW 2015) | Waterdoorlatendheid (normale proef) |
RAW proef 13 |
proef 14 (RAW 2010; RAW 2015) | Plasticiteit van grond. |
RAW proef 14 |
proef 15 (RAW 2010; RAW 2015) | Fijnheidsgetal. |
RAW proef 15 |
proef 18 (RAW 2010; RAW 2015) | Druksterkte van een uit een gebonden fundering geboorde cilinder. |
RAW proef 18 |
proef 19 (RAW 2010; RAW 2015) | Fulvozuurproef. |
RAW proef 19 |
proef 2 (RAW 2010; RAW 2015) | Het bepalen van het gehalte aan minerale deeltjes door zeef 63um. |
RAW proef 2 |
proef 20 (RAW 2010; RAW 2015) | pH-methode |
RAW proef 20 |
proef 28 (RAW 2010; RAW 2015) | Het bepalen van het gloeiverlies en het_x000d_ organische-stofgehalte |
RAW proef 28 |
proef 28 (RAW 2010; RAW 2015) | Gloeiverlies, organische stof en CaCo3-gehalte. |
RAW proef 28 |
proef 29 (RAW 2010; RAW 2015) | Textuurbepaling (lutumgehalte, leemgehalte en M50-cijfer). |
RAW proef 29 |
proef 3 (RAW 2010; RAW 2015) | Het bepalen van de verdichtingsgraad van aardebaan- of funderingsmateriaal. |
RAW proef 3 |
Proef 35 (RAW 2010; RAW 2015) | Het bepalen van het gehalte aan_x000d_ bestanddelen. |
RAW proef 35 |
proef 36 (RAW 2010; RAW 2015) | Gehalte aan organisch stof van grond. |
RAW proef 36 |
proef 37 (RAW 2010; RAW 2015) | Massaverlies bij zoutzuurbehandeling van grond. |
RAW proef 37 |
proef 38 (RAW 2010; RAW 2015) | Zoutgehalte van grond. |
RAW proef 38 |
Proef 53 (RAW 2010; RAW 2015) | Het bepalen van de laagdikte. |
RAW proef 53 |
proef 6 (RAW 2010; RAW 2015) | Het bepalen van de verdichting in situ;_x000d_ steekringmethode |
RAW proef 6 |
proef 64 (RAW 2010; RAW 2015) | Het bepalen van de laagdikte. |
RAW proef 64 |
proef 66 (RAW 2010; RAW 2015) | Het bepalen van de verdichtingsgraad. |
RAW proef 66 |
proef 67 (RAW 2010; RAW 2015) | Het bepalen van dichtheid van het_x000d_ proefstuk met ingesloten lucht |
RAW proef 67 |
proef 68 (RAW 2010; RAW 2015) | Het bepalen van de dichtheid van het_x000d_ mengsel zonder ingesloten lucht. |
RAW proef 68 |
proef 69 (RAW 2010; RAW 2015) | Het bepalen van het gehalte aan poriën_x000d_ (holle ruimte) |
RAW proef 69 |
proef 7 (RAW 2010; RAW 2015) | Het bepalen van dichtheid in situ;_x000d_ grindmethode |
RAW proef 7 |
proef 76 RAW 2000 | Het bepalen van stroefheid. |
RAW 2000 proef 76 |
proef 77.1 77.2 (RAW 2015) | Het aantonen van PAK (inclusief_x000d_ beschrijving van de constructieopbouw_x000d_ per gemeten laagdikte) |
RAW proef 77.1 77.2 |
Proef 79 (RAW 2010; RAW 2015) | Het bepalen van de dichtheid. |
RAW proef 79 |
proef 8 (RAW 2010; RAW 2015) | Het bepalen van de verdichting in situ;_x000d_ nucleaire methode. |
RAW proef 8 |
proef 9 (RAW 2010; RAW 2015) | Het bepalen van het verband tussen het vochtgehalte en de dichtheid (proctorproef) |
RAW proef 9 |
Het bepalen van het gehalte aan poriën_x000d_ (holle ruimte)
Accredited: Yes
Capability | Description | Standard |
---|---|---|
NPR-CEN/TS 12390-9 | Het bepalen van de afschilfering bij vorst_x000d_ dooibestandheid._x000d_ CEN/TS 13290-9 describes the testing of the freeze-thaw scaling resistance of concrete both with water and with sodium chloride solution. It can be used either to compare new constituents or new concrete compositions against a constituent or a concrete composition that is known to give adequate performance in the local environment or to assess the test results against some absolute numerical values based on local experiences. Extrapolation of test results to assess different concretes, i.e. new constituents or new concrete compositions, requires an expert evaluation. There is no established correlation between the results obtained by the three test methods. All tests will clearly identify poor and good behaviour, but they differ in their assessment of marginal behaviour. The application of different acceptance limits for test results enables assessment for different degrees of exposure severity. In case of justified modifications of the test parameters, precautions might apply. Some alternative applications are described in Annex A. |
NPR-CEN/TS 12390-9 |
Beproevingsmethoden voor het bepalen van de laboratoriumreferentiedichtheid en het watergehalte - Proctorverdichting | This European Standard specifies test methods for the determination of the relationship between the water content and the dry density of hydraulically bound or unbound mixtures after compaction under specified test conditions using Proctor compaction. It allows an estimate of the mixture density that can be achieved on construction sites and provides a reference parameter for assessing the density of the compacted layer of the mixture. This European Standard applies only to unbound and hydraulically bound mixtures of aggregates used in road construction and civil engineering work. It is not applicable to soils for earthworks. The results of this test method can be used as a basis for comparing mixtures before use in road construction. The test results also allow a conclusion to be drawn as to the water content at which mixtures can be satisfactorily compacted in order to achieve a given dry density. This test is suitable for mixtures with different values of upper sieve (D) size up to 63 mm and an oversize up to 25 % by mass. |
NEN-EN 13286-2 |
Cur aanbeveling 20 | Bepalen van de hechtsterkte van mortels op beton. |
Cur aanbeveling 20 |
CUR Aanbevelingen 33 proef G | Het bepalen van de waterdoorlatendheid;_x000d_ gravimetrie_x000d_ |
CUR Aanbevelingen 33 proef G |
Methoden voor monsterneming | Bevat methoden voor het verkrijgen van monsters van toeslagmaterialen uit leveringen, bereidings- en verwerkingsinstallaties, inclusief voorraden. Het doel van de monsterneming is een verzamelmonster te verkrijgen dat representatief is voor de gemiddelde eigenschappen van de partij. De methoden die in deze norm worden gespecificeerd, zijn ook geschikt voor het verkrijgen van monstergrepen die afzonderlijk kunnen worden beproefd. Er wordt ook beschreven welke methoden voor monsterdeling kunnen worden gebruikt. De in deze norm beschreven methoden zijn alleen bruikbaar voor civieltechnische doeleinden. |
NEN-EN 932-1 |
NEN-EN 1015-10 | Bepaling van de droge volumieke massa van verharde mortel._x000d_ Specifies a method for determining the dry bulk density of hardenend mortars. It is applicable to lightweight and general purpose and thin layer mortars using specimens of regular shape. |
NEN-EN 1015-10 |
NEN-EN 1015-11 | Het bepalen van de buigtreksterkte en de_x000d_ druksterkte._x000d_ Specifies a method for determining the flexural and compressive strenght of moulded mortar specimens. |
NEN-EN 1015-11 |
NEN-EN 1097-1 | Het bepalen van de weerstand tegen_x000d_ afslijting (micro-Deval)._x000d_ This European Standard describes the reference method used for type testing and in case of dispute for determining the resistance to wear of coarse aggregates (main text) and aggregates for railway ballast (Annex A). For other purposes, in particular factory production control, other methods may be used provided that an appropriate working relationship with the reference method has been established. The sample is normally tested in a wet condition, but the test may also be carried out in a dry condition. This European Standard applies to natural, manufactured or recycled aggregates used in building or civil engineering. |
NEN-EN 1097-1 |
NEN-EN 1097-2 | Het bepalen van de bestandheid tegen_x000d_ verbrijzeling._x000d_ This European Standard describes the reference method, the Los Angeles test, used for type testing and in case of dispute (and an alternative method, the impact test) for determining the resistance to fragmentation of coarse aggregates and aggregates for railway ballast (Annex A). For other purposes, in particular factory production control, other methods may be used provided that an appropriate working relationship with the reference method has been established. This European Standard applies to natural, manufactured or recycled aggregates used in building and civil engineering. |
NEN-EN 1097-2 |
NEN-EN 1097-4 | Het bepalen van de holle ruimte;_x000d_ standaardverdichting._x000d_ This standard describes the reference method used for type testing and in cases of dispute, the determination of the voids of dry compacted filler by means of a Rigden apparatus. For other purposes, in particular factory production control, other methods may be used provided that an appropriate working relationship with the reference method has been established. The test is applicable to natural and manufactured fillers. It is used, for example to determine their bitumen carrying capacity. |
NEN-EN 1097-4 |
NEN-EN 1097-5 | Het bepalen van het watergehalte._x000d_ This standard describes the reference method used for type testing and in cases of dispute for the determination of the water content of aggregates by drying in a ventilated oven. For other purposes, in particular factory production control, other methods may be used provided that an appropriate working relationship with the reference method has been established. |
NEN-EN 1097-5 |
NEN-EN 1097-6 art. 8, 9 | Het bepalen van de deeltjesdichtheid en_x000d_ wateropname._x000d_ Pyknometer method for aggregate particles passing the 31,5 mm test sieve and retained_x000d_ on the 4 mm test sieve._x000d_ Pyknometer method for aggregate particles passing the 4 mm test sieve and retained on_x000d_ the 0,063 mm test sieve |
NEN-EN 1097-6 |
NEN-EN 1097-7 | Het bepalen van de dichtheid._x000d_ This standard describes the reference method used for type testing and in cases of dispute for the determination of the particle density of filler by means of a pyknometer. |
NEN-EN 1097-7 |
NEN-EN 1097-8 | Het bepalen van de polijstwaarden_x000d_ (PSV)._x000d_ This Standard describes the reference method used for type testing and in cases of dispute for determining the polished stone value (PSV) of a coarse aggregate used in road surfacings. For other purposes, in particular factory production control, other methods may be used provided that an appropriate working relationship with the reference method has been established. Annex A describes an optional method for the determination of the aggregate abrasion value (AAV). |
NEN-EN 1097-8 |
NEN-EN 12390-3 | Het bepalen van de druksterkte._x000d_ This European Standard specifies a method for the determination of the compressive strength of test specimens of hardened concrete. |
NEN-EN 12390-3 |
NEN-EN 12390-6 | Het bepalen van de splijttreksterkte;_x000d_ drukbelasting middels lijnlast._x000d_ This European Standard specifies a method for the determination of the tensile splitting strength of cylindrical test specimens of hardened concrete. A method using cubic or prismatic specimens is included in normative Annex A. |
NEN-EN 12390-6 |
NEN-EN 12390-7 | Het bepalen van de volumieke massa._x000d_ This European Standard specifies a method for determining the density of hardened concrete. It is applicable to lightweight, normal-weight and heavy-weight concrete. It differentiates between hardened concrete in the following states: 1) as-received; 2) water saturated; 3) oven-dried. The mass and volume of the specimen of hardened concrete are determined and the density calculated. |
NEN-EN 12390-7 |
NEN-EN 12697-1 | Gehalte aan oplosbaar bindmiddel._x000d_ This document describes test methods for the determination of the soluble binder content of samples of bituminous mixtures. The test methods described are suitable for quality control purposes during the production of plant mix and for checking compliance with a product specification. For the analysis of mixtures containing modified binders, the guidance of Annex D should be followed. |
NEN-EN 12697-1 |
NEN-EN 12697-11 | Het bepalen van de affiniteit tussen_x000d_ toeslagmateriaal en bitumen._x000d_ This European Standard specifies procedures for the determination of the affinity between aggregate and bitumen and its influence on the susceptibility of the combination to stripping. This property is intended to be of assistance to the designer for mixture design rather than as a type test. Susceptibility to stripping, as determined by these procedures, is an indirect measure of the power of a binder to adhere to various aggregates, or of various binders to adhere to a given aggregate. The procedures can also be used to evaluate the effect of moisture on a given aggregate-binder combination with or without adhesion agents including liquids, such as amines, and fillers, such as hydrated lime or cement. In the rolling bottle method, the affinity is expressed by visual registration of the degree of bitumen coverage on uncompacted bitumen-coated mineral aggregate particles after influence of mechanical stirring action in the presence of water. |
NEN-EN 12697-11 |
NEN-EN 12697-12 | Bepaling van de watergevoeligheid van bitumineuze proefstukken._x000d_ This European Standard describes three test methods for determining the effect of saturation and accelerated water conditioning. These methods can be used to evaluate the effect of moisture with or without anti-stripping additives including liquids, such as amines, and fillers, such as hydrated lime or cement: - method A uses the indirect tensile strength of cylindrical specimens of bituminous mixtures; - method B uses the compression strength of cylindrical specimens of bituminous mixtures; - method C defines the bonding value of soft asphalt mixtures 1 h after mixing, where the bonding of bitumen and aggregate can be equated to a bonding value. Method A and method B give the same result on average. However, if the slenderness of the specimens is less than 0,5, method B is not suitable. Method C is suitable for soft asphalt mixtures with bitumen of viscosity at 60 ºC of 4000 mm2/s or less, for which methods A and B are not suitable. |
NEN-EN 12697-12 |
NEN-EN 12697-2 | Bepaling van de deeltjesgrootteverdeling._x000d_ NEN-EN 12697-2 specifies a procedure for the determination of the particle size distribution of the aggregates of bituminous mixtures by sieving. The test is applicable to aggregates recovered after binder extraction in accordance with EN 12697-1 or EN 12697-39. The applicability of this European Standard is described in the product standards for bituminous mixtures. |
NEN-EN 12697-2 |
NEN-EN 12697-23 | Bepaling van de splijttreksterkte van bitumineuze proefstukken._x000d_ This European Standard specifies a test method for determining the (splitting) indirect tensile strength of cylindrical specimens of bituminous mixtures._x000d_ |
NEN-EN 12697-23 |
NEN-EN 12697-24 | Weerstand tegen vermoeiing._x000d_ This European Standard specifies the methods for characterising the fatigue of bituminous mixtures by alternative tests, including bending tests and direct and indirect tensile tests. The tests are performed on compacted bituminous material under a sinusoidal loading or other controlled loading, using different types of specimens and supports. The procedure is used to rank bituminous mixtures on the basis of resistance to fatigue, as a guide to relative performance in the pavement, to obtain data for estimating the structural behaviour in the road and to judge test data according to specifications for bituminous mixtures. Because this European Standard does not impose a particular type of testing device, the precise choice of the test conditions depends on the possibilities and the working range of the used device. For the choice of specific test conditions, the requirements of the product standards for bituminous mixtures need to be respected. The applicability of this document is described in the product standards for bituminous mixtures. Results obtained from different test methods or using different failure criteria are not assured to be comparable. |
NEN-EN 12697-24 |
NEN-EN 12697-25 | Cyclische drukproef._x000d_ NEN-EN 12697-25 specifies three test methods (A1, A2 and B) for determining the resistance of bituminous mixtures to permanent deformation by cyclic compression tests with confinement. The tests make it possible to rank various mixtures or to check on the acceptability of a given mixture. They do not allow making a quantitative prediction of rutting in the field to be made. Test methods A1 and A2 describe methods for determining the creep characteristics of bituminous mixtures by means of a uniaxial cyclic compression test with some confinement present. In this test a cylindrical test specimen is subjected to a cyclic axial stress. Method A2 is preferred for mastic asphalt and Method A1 for other asphalt mixtures. To achieve a certain confinement, the diameter of the loading platen is taken smaller than that of the test specimen. In test method A1, the test specimen is loaded by block-pulses whereas in method A2 haversine loading with rest time is applied. Test method B describes the method for determining the creep characteristics of bituminous mixtures by means of the triaxial cyclic compression test. In this test a cylindrical test specimen is subjected to a defined confining stress and a cyclic axial stress. This test is most often used for the purpose of evaluation and development of new types of mixtures. This European Standard applies to test specimens prepared in the laboratory or cored from the road. The maximum size of the aggregates is 32 mm. |
NEN-EN 12697-25 |
NEN-EN 12697-26 | Stugheid._x000d_ This European Standard specifies the methods for characterising the stiffness of bituminous mixtures by alternative tests, including bending tests and direct and indirect tensile tests. The tests are performed on compacted bituminous material under a sinusoidal loading or other controlled loading, using different types of specimens and supports. The procedure is used to rank bituminous mixtures on the basis of stiffness, as a guide to relative performance in the pavement, to obtain data for estimating the structural behaviour in the road and to judge test data according to specifications for bituminous mixtures. As this standard does not impose a particular type of testing device the precise choice of the test conditions depends on the possibilities and the working range of the used device. For the choice of specific test conditions, the requirements of the product standards for bituminous mixtures should be respected. The applicability of this document is described in the product standards for bituminous mixtures. |
NEN-EN 12697-26 |
NEN-EN 12697-36 art. 4.1 | Het bepalen van de laagdikte._x000d_ This European Standard describes two test methods for determining the thickness of a bituminous pavement. The first method describes measurements carried out on one or more cores which have been drilled from the full depth of the slab or road structure (destructive method). The second method electro-magnetic (non-destructive) measurement are used. |
NEN-EN 12697-36 |
NEN-EN 12697-5 procedure A | Het bepalen van de dichtheid van het_x000d_ mengsel zonder ingesloten lucht._x000d_ This European Standard specifies test methods for determining the maximum density of a bituminous mixture (voidless mass). It specifies a volumetric procedure, a hydrostatic procedure and a mathematical procedure. The test methods described are intended for use with loose bituminous materials containing paving grade bitumens, modified binders or other bituminous binders used for hot mix asphalt. The tests are suitable for both fresh or aged bituminous materials. |
NEN-EN 12697-5 |
NEN-EN 12697-6 procedure B en D | Het bepalen van dichtheid van het_x000d_ proefstuk met ingesloten lucht._x000d_ This European Standard describes test methods for determining the bulk density of a compacted bituminous specimen. The test methods are intended for use with laboratory compacted specimens or specimens from the pavement after placement and compacting, either by coring or sawing. This European Standard describes the following four procedures, the choice of which is used being dependent on the estimated content and accessibility of voids in the specimen: a) bulk density - dry (for specimens with a very closed surface); b) bulk density - saturated surface dry (SSD) (for specimens with a closed surface); c) bulk density - sealed specimen (for specimens with an open or coarse surface); d) bulk density by dimensions (for specimens with a regular surface and with geometric shapes, i.e. squares, rectangles, cylinders, etc.). |
NEN-EN 12697-6 |
NEN-EN 12697-8 art. 4 | Het bepalen van het gehalte aan poriën_x000d_ (holle ruimte) |
NEN-EN 12697-8 |
NEN-EN 12880, incl. BRL 1801 bijlage L | Het aantonen van schadelijke_x000d_ bestanddelen voor de reactie van cement_x000d_ met water en de aantasting van_x000d_ wapeningsstaal. |
NEN-EN 12880 |
NEN-EN 13036-4 | Oppervlak-eigenschappen van weg- en vliegveldverhardingen - Beproevingsmethoden - Deel 4: Methode voor de meting van de stroefheid van een oppervlak - De slingerproef._x000d_ This European standard describes a method for determining the slip/skid resistance of a surface using a device which remains stationary at the test location. The slip/skid resistance is measured by means of a pendulum arm. The method provides a measure of the slip/skid resistance properties of a surface either in the field or in the laboratory. This method measures the slip/skid resistance of a small area of a surface (approximately 0,01 m2). This should be considered when deciding its applicability to a surface which may have non-homogeneous surface characteristics, e.g. containing ridges or grooves, or is rough textured (exceeding 1,2 mm mean texture depth). |
NEN-EN 13036-4 |
NEN-EN 13179-2 | Het bepalen van het bitumengetal. |
NEN-EN 13179-2 |
NEN-EN 13286-47 en NEN-EN 14227-2 Annex D | Het bepalen van het draagvermogen;_x000d_ normale en verzwaarde C.B.R.-proef. |
NEN-EN 13286-47 |
NEN-EN 1338 | Betonstraatstenen._x000d_ This European Standard specifies materials, properties, requirements and test methods for unreinforced cement bound concrete paving blocks and complementary fittings. It is applicable to precast concrete paving blocks and complementary fittings for pedestrian use, vehicular use and roof coverings, e.g. footpaths, precincts, cycle tracks, car parks, roads, highways, industrial areas (including docks and harbours), aircraft pavements, bus stations, petrol filling stations. In case of regular use of studded tyres additional requirements are sometimes needed. This standard does not deal with the tactility or visibility of blocks nor with permeable blocks. This standard provides for the product marking and the evaluation of conformity of the product to this European Standard. |
NEN-EN 1338 |
NEN-EN 1338 Annex I | Het bepalen van stroefheid van betonstraatstenen._x000d_ |
NEN-EN 1338 |
NEN-EN 13383-2 | Waterbouwsteen._x000d_ Deze Europese norm specificeert de beproevingsmethoden voor natuurlijke, kunstmatige en gerecyclede toeslagmaterialen voor gebruik als waterbouwsteen. |
NEN-EN 13383-2 |
NEN-EN 1339 | Betontegels._x000d_ This European Standard specifies materials, properties, requirements and test methods for cement bound unreinforced concrete paving flags and complementary fittings. It is applicable to precast concrete paving flags and complementary fittings that are particularly for use in external trafficked paved areas and roof coverings. In case of regular use of studded tyres additional requirements are sometimes needed. This standard does not deal with the tactility or visibility of flags nor with permeable flags. This standard provides for the product marking and the evaluation of conformity of the product to this European Standard. |
NEN-EN 1339 |
NEN-EN 1339 Annex I | Het bepalen van stroefheid van betontegels. |
NEN-EN 1339 |
NEN-EN 1340 | Betonbanden._x000d_ This European Standard specifies materials, properties, requirements and test methods for unreinforced, cement bound precast concrete kerb units, channels and complementary fittings, that are for use in trafficked paved areas and roof coverings. The units are used to fulfil one or more of the following: Separation, physical or visual delineation, the provision of drainage or the containment of paved areas or other surfacing. In case of regular use of studded tyres, additional requirements are sometimes needed. This standard provides for the product marking and the evaluation of conformity of the product to this European standard. Apart from the tolerances, this standard does not include requirements for cross-sections, shapes and dimensions. This standard does not deal with the tactility or visibility of kerbs. |
NEN-EN 1340 |
NEN-EN 1340 Annex I | Het bepalen van stroefheid van betonbanden. |
NEN-EN 1340 |
NEN-EN 1367-1 | Het bepalen van de bestandheid tegen_x000d_ vriezen en dooien._x000d_ This European Standard specifies a test method which provides information on how an aggregate behaves when it is subjected to the cyclic action of freezing and thawing. |
NEN-EN 1367-1 |
NEN-EN 1367-2 | Het bepalen van de thermische_x000d_ eigenschappen en de bestandheid tegen_x000d_ verwering van toeslagmaterialen_x000d_ (magnesiumsulfaatproef)._x000d_ This European Standard describes the reference method used for type testing and in cases of dispute for assessing how an aggregate behaves when subjected to the cyclic action of immersion in magnesium sulfate, followed by oven drying. |
NEN-EN 1367-2 |
NEN-EN 1367-5 | Het bepalen van de weerstand tegen_x000d_ kortstondige verhitting._x000d_ This European Standard specifies methods for the determination of resistance to thermal shock of aggregates, subject to heating and drying in the production of hot bituminous mixtures. This standard describes the reference method use for type testing and in case of dispute. For the purpose of type testing and in case of dispute only the reference method should be used. |
NEN-EN 1367-5 |
NEN-EN 1426 | Bepaling van de naaldpenetratie._x000d_ NEN-EN 1426 specifies a method for determining the consistency of bitumen and bituminous binders. Normal procedure is described for penetrations up to (330 × 0,1) mm, but for penetrations above this value, up to (500 × 0,1) mm, different operating parameters are necessary. |
NEN-EN 1426 |
NEN-EN 1427 | Bepaling van het verwekingspunt - Ring- en kogelmethode._x000d_ NEN-EN 1427 specifies a method for the determination of the softening point of bitumen and bituminous binders in the range of 28 °C to 150 °C. Technical warning - The change from mercury thermometers to electronic temperature devices has revealed that the temperature definition in the mercury thermometer has not been precise enough to make a correct, unbiased transfer to electronic devices. Care should be taken for softening points ring and ball above 100 °C as the condition may have changed from previous practise to present days testing equipment. Below approx. 100 °C the difference in temperature readings between electronic and mercury stem thermometer is acceptable compared to the repeatability of this test methods. [Reference: ASTM E20 Group] |
NEN-EN 1427 |
NEN-EN 1436 Annex D | Het bepalen van stroefheid van wegmarkering. |
NEN-EN 1436 |
NEN-EN 1744-1 art 12 | Het bepalen van het gehalte aan in zuur_x000d_ oplosbare sulfaten._x000d_ Determination of acid soluble sulfates. |
NEN-EN 1744-1 |
NEN-EN 1744-1 art. 7 | Het bepalen van het gehalte aan_x000d_ chloride._x000d_ Determination of water-soluble chloride salts using the Volhard method. |
NEN-EN 1744-1 |
NEN-EN 1744-1 art.11 | Het bepalen van het totale gehalte aan_x000d_ zwavel._x000d_ Determination of total sulfur content. |
NEN-EN 1744-1 |
NEN-EN 1744-1 art.14.1 | Het bepalen van het gehalte aan_x000d_ reactieve ijzersulfidedeeltjes._x000d_ Examination for the presence of reactive iron sulfide particles. |
NEN-EN 1744-1 |
NEN-EN 1744-1 art.14.2 | Het bepalen van het gehalte aan lichte_x000d_ stukken materiaal._x000d_ Determination of lightweight contaminators. |
NEN-EN 1744-1 |
NEN-EN 1744-1 art.15.1 | Het bepalen van het humusgehalte_x000d_ (natronloogproef)._x000d_ Determination of potential presence of humus. |
NEN-EN 1744-1 |
NEN-EN 1744-1 art.15.2 | Het bepalen van het gehalte aan_x000d_ fulvozuur._x000d_ Determination of fulvo acid content. |
NEN-EN 1744-1 |
NEN-EN 1744-1 art.16.2 | Het bepalen van de wateroplosbaarheid._x000d_ Determination of water solubility of filler. |
NEN-EN 1744-1 |
NEN-EN 1744-4 | Het bepalen van de watergevoeligheid._x000d_ This European Standard specifies the procedure for the determination of the water susceptibility of fillers for bituminous mixtures, by separation of filler from a bitumen filler mixture. A method for the determination of water susceptibility by volume increase and loss of stability of a Marshall specimen is described in Annex A. |
NEN-EN 1744-4 |
NEN-EN 196-1 | Het vervaardigen van mortelprisma’s en_x000d_ cementmortel en het bepalen van de_x000d_ druksterkte._x000d_ This part of EN 196 describes the method for the determination of the compressive and, optionally, the flexural strength of cement mortar. The method applies to common cements and to other cements and materials, the standards for which call up this method. It may not apply to other cement types that have, for example, a very short initial setting time. The method is used for assessing whether the compressive strength of cement is in conformity with its specification and for validation testing of a CEN Standard sand, EN 196-1, or alternative compaction equipment. This part of EN 196 describes the reference equipment and procedure and allows alternative compaction equipment and procedures to be used provided that they have been validated in accordance with the appropriate provisions in this document. In the event of a dispute, only the reference equipment and procedure are used. |
196-1 |
NEN-EN 196-2 (artikelen 4.4.1, 4.4.2, 4.4.3 en 4.5.16) | Determination of loss on ignition._x000d_ Determination of sulfate._x000d_ Determination of residue insoluble in hydrochloric acid and sodium carbonate._x000d_ Determination of chloride. |
NEN-EN 196-2 |
NEN-EN 196-2 art. 4.5.17 | Determination of carbon dioxide (reference method)._x000d_ Het bepalen van het_x000d_ koolstofdioxidegehalte |
NEN-EN 196-2 |
NEN-EN 196-3 | Bepaling van begin en einde van de binding en bepaling van de vormhoudendheid._x000d_ Het bepalen van de vormhoudendheid_x000d_ (proef van Le Chatelier._x000d_ NEN-EN 196-3 specifies the methods for determining standard consistence, setting times and soundness of cements. The method applies to common cements and to other cements and materials, the standards for which call up this method. It may not apply to other cement types that have, for example, a very short initial setting time. The method is used for assessing whether the setting time and soundness of a cement is in conformity with its specification. This part of EN 196 describes the reference methods and allows the use of alternative procedures and equipment, as indicated in notes, provided that they have been calibrated against the reference methods. In the event of a dispute, only the reference equipment and procedures are used. |
NEN-EN 196-3 |
NEN-EN 459-2 art. 5.8 | Available lime._x000d_ De bepaling van het beschikbare_x000d_ kalkgehalte. |
NEN-EN 459-2 |
NEN-EN 933-1 | Het bepalen van de_x000d_ korrelgrootteverdeling._x000d_ This European Standard describes the reference washing and dry sieving method used for type testing and in case of dispute, for determination of the particle size distribution of aggregates. For other purposes, in particular factory production control, other methods may be used, provided that an appropriate working relationship with the reference method has been established. It applies to all aggregates, including lightweight aggregates, up to 90 mm nominal size, but excluding filler. |
NEN-EN 933-1 |
NEN-EN 933-10 | Het bepalen van de korrelverdeling_x000d_ (luchtstraalzeefanalyse)._x000d_ This European Standard describes the reference method used for type testing and in cases of dispute for determining the particle size distribution up to 2 mm size of natural or manufactured origin filler aggregate using air jet sieving. For other purposes, in particular factory production control, other methods may be used provided that an appropriate working relationship with the reference method has been established. |
NEN-EN 933-10 |
NEN-EN 933-11 | Het bepalen van de samenstelling_x000d_ (classificatieproef)._x000d_ This European Standard describes a simple method for the examination of coarse recycled aggregates for the purpose of identifying and estimating the relative proportions of constituent materials. This reference test method should be used for type testing and in case of dispute. For other purposes, in particular factory production control, other methods may be used provided that an appropriate working relationship with the reference method has been established. |
NEN-EN 933-11 |
NEN-EN 933-3 | Het bepalen van de korrelvorm._x000d_ This European Standard describes the reference method, used for type testing and in case of dispute, for determination of the flakiness index of aggregates. For other purposes, in particular production control, other methods may be used, provided that an appropriate working relationship with the reference method has been established. This European Standard applies to natural, manufactured or recycled aggregates. The test procedure specified in this part of this European Standard is not applicable to particle sizes less than 4 mm or greater than 100 mm. |
NEN-EN 933-3 |
NEN-EN 933-5 | Het bepalen van het percentage aan_x000d_ gebroken oppervlakken._x000d_ Specifies a method for the determination of the percentage of particles with crushed and broken surface in a sample of natural coarse aggregate. It applies to gravel or mixed aggregate containing gravel. |
NEN-EN 933-5 |
NEN-EN 933-6 art. 8 | Het bepalen van de stroomcoëfficiënt._x000d_ NEN-EN 933-6 specifies the reference method used for type testing, and in case of dispute, for determining the flow coefficient of coarse and fine aggregates. For other purposes, in particular factory production control, other methods may be used provided that an appropriate working relationship with the reference method has been established. Examples of advanced test methods can be found in the Bibliography. This European Standard applies to coarse aggregate of sizes between 4 mm and 20 mm and to fine aggregate of size up to 2 mm. |
NEN-EN 933-6 |
NEN-EN 933-7 | Het bepalen van het gehalte aan_x000d_ schelpen._x000d_ Specifies a method for the determination of shell content of coarse aggregates. It applies to gravel or mixed aggregate containing gravel. |
NEN-EN 933-7 |
NEN-EN 933-8 | Het bepalen van het gehalte aan fijn_x000d_ materiaal (zandequivalentproef)._x000d_ NEN-EN 933-8+A1 describes the reference method used for type testing and in case of dispute for the determination of the sand equivalent value of 0/2 mm fraction (for 0/4 mm, see Annex A) in fine aggregates or all-in aggregates. For other purposes, in particular factory production control, other methods may be used provided that an appropriate working relationship with the reference method has been established. |
NEN-EN 933-8 |
NEN-EN 933-9 | Het bepalen van het gehalte aan fijn_x000d_ materiaal (methyleenblauwproef)._x000d_ This standard describes the reference method used for type testing and in cases of dispute for the determination of the methylene blue value of the 0/2 mm fraction in fine aggregates or all-in aggregates (MB). It also describes the reference method for the determination of the methylene blue value of the 0/0,125 mm fraction (MBF) in Annex A. For other purposes, in particular factory production control, other methods may be used provided that an appropriate working relationship with the suitable reference method has been established. |
NEN-EN 933-9 |
proef 77.3 RAW 2015 | Het aantonen van PAK; DLC |
proef 77.3 RAW 2015 |
Proef 1 (RAW 2010; RAW 2015) | Het bepalen van de korrelverdeling (areometerproef) |
RAW proef 1 |
proef 10 (RAW 2010; RAW 2015) | Het bepalen van de éénpuntsproctor. |
RAW proef 10 |
proef 11 (RAW 2010; RAW 2015) | Het bepalen van de korrelverdeling. |
RAW proef 11 |
proef 13 (RAW 2010; RAW 2015) | Waterdoorlatendheid (normale proef) |
RAW proef 13 |
proef 14 (RAW 2010; RAW 2015) | Plasticiteit van grond. |
RAW proef 14 |
proef 15 (RAW 2010; RAW 2015) | Fijnheidsgetal. |
RAW proef 15 |
proef 18 (RAW 2010; RAW 2015) | Druksterkte van een uit een gebonden fundering geboorde cilinder. |
RAW proef 18 |
proef 19 (RAW 2010; RAW 2015) | Fulvozuurproef. |
RAW proef 19 |
proef 2 (RAW 2010; RAW 2015) | Het bepalen van het gehalte aan minerale deeltjes door zeef 63um. |
RAW proef 2 |
proef 20 (RAW 2010; RAW 2015) | pH-methode |
RAW proef 20 |
proef 28 (RAW 2010; RAW 2015) | Het bepalen van het gloeiverlies en het_x000d_ organische-stofgehalte |
RAW proef 28 |
proef 28 (RAW 2010; RAW 2015) | Gloeiverlies, organische stof en CaCo3-gehalte. |
RAW proef 28 |
proef 29 (RAW 2010; RAW 2015) | Textuurbepaling (lutumgehalte, leemgehalte en M50-cijfer). |
RAW proef 29 |
proef 3 (RAW 2010; RAW 2015) | Het bepalen van de verdichtingsgraad van aardebaan- of funderingsmateriaal. |
RAW proef 3 |
Proef 35 (RAW 2010; RAW 2015) | Het bepalen van het gehalte aan_x000d_ bestanddelen. |
RAW proef 35 |
proef 36 (RAW 2010; RAW 2015) | Gehalte aan organisch stof van grond. |
RAW proef 36 |
proef 37 (RAW 2010; RAW 2015) | Massaverlies bij zoutzuurbehandeling van grond. |
RAW proef 37 |
proef 38 (RAW 2010; RAW 2015) | Zoutgehalte van grond. |
RAW proef 38 |
Proef 53 (RAW 2010; RAW 2015) | Het bepalen van de laagdikte. |
RAW proef 53 |
proef 6 (RAW 2010; RAW 2015) | Het bepalen van de verdichting in situ;_x000d_ steekringmethode |
RAW proef 6 |
proef 64 (RAW 2010; RAW 2015) | Het bepalen van de laagdikte. |
RAW proef 64 |
proef 66 (RAW 2010; RAW 2015) | Het bepalen van de verdichtingsgraad. |
RAW proef 66 |
proef 67 (RAW 2010; RAW 2015) | Het bepalen van dichtheid van het_x000d_ proefstuk met ingesloten lucht |
RAW proef 67 |
proef 68 (RAW 2010; RAW 2015) | Het bepalen van de dichtheid van het_x000d_ mengsel zonder ingesloten lucht. |
RAW proef 68 |
proef 69 (RAW 2010; RAW 2015) | Het bepalen van het gehalte aan poriën_x000d_ (holle ruimte) |
RAW proef 69 |
proef 7 (RAW 2010; RAW 2015) | Het bepalen van dichtheid in situ;_x000d_ grindmethode |
RAW proef 7 |
proef 76 RAW 2000 | Het bepalen van stroefheid. |
RAW 2000 proef 76 |
proef 77.1 77.2 (RAW 2015) | Het aantonen van PAK (inclusief_x000d_ beschrijving van de constructieopbouw_x000d_ per gemeten laagdikte) |
RAW proef 77.1 77.2 |
Proef 79 (RAW 2010; RAW 2015) | Het bepalen van de dichtheid. |
RAW proef 79 |
proef 8 (RAW 2010; RAW 2015) | Het bepalen van de verdichting in situ;_x000d_ nucleaire methode. |
RAW proef 8 |
proef 9 (RAW 2010; RAW 2015) | Het bepalen van het verband tussen het vochtgehalte en de dichtheid (proctorproef) |
RAW proef 9 |
Betontegels._x000d_ This European Standard specifies materials, properties, requirements and test methods for cement bound unreinforced concrete paving flags and complementary fittings. It is applicable to precast concrete paving flags and complementary fittings that are particularly for use in external trafficked paved areas and roof coverings. In case of regular use of studded tyres additional requirements are sometimes needed. This standard does not deal with the tactility or visibility of flags nor with permeable flags. This standard provides for the product marking and the evaluation of conformity of the product to this European Standard.
Accredited: No
Capability | Description | Standard |
---|---|---|
NPR-CEN/TS 12390-9 | Het bepalen van de afschilfering bij vorst_x000d_ dooibestandheid._x000d_ CEN/TS 13290-9 describes the testing of the freeze-thaw scaling resistance of concrete both with water and with sodium chloride solution. It can be used either to compare new constituents or new concrete compositions against a constituent or a concrete composition that is known to give adequate performance in the local environment or to assess the test results against some absolute numerical values based on local experiences. Extrapolation of test results to assess different concretes, i.e. new constituents or new concrete compositions, requires an expert evaluation. There is no established correlation between the results obtained by the three test methods. All tests will clearly identify poor and good behaviour, but they differ in their assessment of marginal behaviour. The application of different acceptance limits for test results enables assessment for different degrees of exposure severity. In case of justified modifications of the test parameters, precautions might apply. Some alternative applications are described in Annex A. |
NPR-CEN/TS 12390-9 |
Beproevingsmethoden voor het bepalen van de laboratoriumreferentiedichtheid en het watergehalte - Proctorverdichting | This European Standard specifies test methods for the determination of the relationship between the water content and the dry density of hydraulically bound or unbound mixtures after compaction under specified test conditions using Proctor compaction. It allows an estimate of the mixture density that can be achieved on construction sites and provides a reference parameter for assessing the density of the compacted layer of the mixture. This European Standard applies only to unbound and hydraulically bound mixtures of aggregates used in road construction and civil engineering work. It is not applicable to soils for earthworks. The results of this test method can be used as a basis for comparing mixtures before use in road construction. The test results also allow a conclusion to be drawn as to the water content at which mixtures can be satisfactorily compacted in order to achieve a given dry density. This test is suitable for mixtures with different values of upper sieve (D) size up to 63 mm and an oversize up to 25 % by mass. |
NEN-EN 13286-2 |
Cur aanbeveling 20 | Bepalen van de hechtsterkte van mortels op beton. |
Cur aanbeveling 20 |
CUR Aanbevelingen 33 proef G | Het bepalen van de waterdoorlatendheid;_x000d_ gravimetrie_x000d_ |
CUR Aanbevelingen 33 proef G |
Methoden voor monsterneming | Bevat methoden voor het verkrijgen van monsters van toeslagmaterialen uit leveringen, bereidings- en verwerkingsinstallaties, inclusief voorraden. Het doel van de monsterneming is een verzamelmonster te verkrijgen dat representatief is voor de gemiddelde eigenschappen van de partij. De methoden die in deze norm worden gespecificeerd, zijn ook geschikt voor het verkrijgen van monstergrepen die afzonderlijk kunnen worden beproefd. Er wordt ook beschreven welke methoden voor monsterdeling kunnen worden gebruikt. De in deze norm beschreven methoden zijn alleen bruikbaar voor civieltechnische doeleinden. |
NEN-EN 932-1 |
NEN-EN 1015-10 | Bepaling van de droge volumieke massa van verharde mortel._x000d_ Specifies a method for determining the dry bulk density of hardenend mortars. It is applicable to lightweight and general purpose and thin layer mortars using specimens of regular shape. |
NEN-EN 1015-10 |
NEN-EN 1015-11 | Het bepalen van de buigtreksterkte en de_x000d_ druksterkte._x000d_ Specifies a method for determining the flexural and compressive strenght of moulded mortar specimens. |
NEN-EN 1015-11 |
NEN-EN 1097-1 | Het bepalen van de weerstand tegen_x000d_ afslijting (micro-Deval)._x000d_ This European Standard describes the reference method used for type testing and in case of dispute for determining the resistance to wear of coarse aggregates (main text) and aggregates for railway ballast (Annex A). For other purposes, in particular factory production control, other methods may be used provided that an appropriate working relationship with the reference method has been established. The sample is normally tested in a wet condition, but the test may also be carried out in a dry condition. This European Standard applies to natural, manufactured or recycled aggregates used in building or civil engineering. |
NEN-EN 1097-1 |
NEN-EN 1097-2 | Het bepalen van de bestandheid tegen_x000d_ verbrijzeling._x000d_ This European Standard describes the reference method, the Los Angeles test, used for type testing and in case of dispute (and an alternative method, the impact test) for determining the resistance to fragmentation of coarse aggregates and aggregates for railway ballast (Annex A). For other purposes, in particular factory production control, other methods may be used provided that an appropriate working relationship with the reference method has been established. This European Standard applies to natural, manufactured or recycled aggregates used in building and civil engineering. |
NEN-EN 1097-2 |
NEN-EN 1097-4 | Het bepalen van de holle ruimte;_x000d_ standaardverdichting._x000d_ This standard describes the reference method used for type testing and in cases of dispute, the determination of the voids of dry compacted filler by means of a Rigden apparatus. For other purposes, in particular factory production control, other methods may be used provided that an appropriate working relationship with the reference method has been established. The test is applicable to natural and manufactured fillers. It is used, for example to determine their bitumen carrying capacity. |
NEN-EN 1097-4 |
NEN-EN 1097-5 | Het bepalen van het watergehalte._x000d_ This standard describes the reference method used for type testing and in cases of dispute for the determination of the water content of aggregates by drying in a ventilated oven. For other purposes, in particular factory production control, other methods may be used provided that an appropriate working relationship with the reference method has been established. |
NEN-EN 1097-5 |
NEN-EN 1097-6 art. 8, 9 | Het bepalen van de deeltjesdichtheid en_x000d_ wateropname._x000d_ Pyknometer method for aggregate particles passing the 31,5 mm test sieve and retained_x000d_ on the 4 mm test sieve._x000d_ Pyknometer method for aggregate particles passing the 4 mm test sieve and retained on_x000d_ the 0,063 mm test sieve |
NEN-EN 1097-6 |
NEN-EN 1097-7 | Het bepalen van de dichtheid._x000d_ This standard describes the reference method used for type testing and in cases of dispute for the determination of the particle density of filler by means of a pyknometer. |
NEN-EN 1097-7 |
NEN-EN 1097-8 | Het bepalen van de polijstwaarden_x000d_ (PSV)._x000d_ This Standard describes the reference method used for type testing and in cases of dispute for determining the polished stone value (PSV) of a coarse aggregate used in road surfacings. For other purposes, in particular factory production control, other methods may be used provided that an appropriate working relationship with the reference method has been established. Annex A describes an optional method for the determination of the aggregate abrasion value (AAV). |
NEN-EN 1097-8 |
NEN-EN 12390-3 | Het bepalen van de druksterkte._x000d_ This European Standard specifies a method for the determination of the compressive strength of test specimens of hardened concrete. |
NEN-EN 12390-3 |
NEN-EN 12390-6 | Het bepalen van de splijttreksterkte;_x000d_ drukbelasting middels lijnlast._x000d_ This European Standard specifies a method for the determination of the tensile splitting strength of cylindrical test specimens of hardened concrete. A method using cubic or prismatic specimens is included in normative Annex A. |
NEN-EN 12390-6 |
NEN-EN 12390-7 | Het bepalen van de volumieke massa._x000d_ This European Standard specifies a method for determining the density of hardened concrete. It is applicable to lightweight, normal-weight and heavy-weight concrete. It differentiates between hardened concrete in the following states: 1) as-received; 2) water saturated; 3) oven-dried. The mass and volume of the specimen of hardened concrete are determined and the density calculated. |
NEN-EN 12390-7 |
NEN-EN 12697-1 | Gehalte aan oplosbaar bindmiddel._x000d_ This document describes test methods for the determination of the soluble binder content of samples of bituminous mixtures. The test methods described are suitable for quality control purposes during the production of plant mix and for checking compliance with a product specification. For the analysis of mixtures containing modified binders, the guidance of Annex D should be followed. |
NEN-EN 12697-1 |
NEN-EN 12697-11 | Het bepalen van de affiniteit tussen_x000d_ toeslagmateriaal en bitumen._x000d_ This European Standard specifies procedures for the determination of the affinity between aggregate and bitumen and its influence on the susceptibility of the combination to stripping. This property is intended to be of assistance to the designer for mixture design rather than as a type test. Susceptibility to stripping, as determined by these procedures, is an indirect measure of the power of a binder to adhere to various aggregates, or of various binders to adhere to a given aggregate. The procedures can also be used to evaluate the effect of moisture on a given aggregate-binder combination with or without adhesion agents including liquids, such as amines, and fillers, such as hydrated lime or cement. In the rolling bottle method, the affinity is expressed by visual registration of the degree of bitumen coverage on uncompacted bitumen-coated mineral aggregate particles after influence of mechanical stirring action in the presence of water. |
NEN-EN 12697-11 |
NEN-EN 12697-12 | Bepaling van de watergevoeligheid van bitumineuze proefstukken._x000d_ This European Standard describes three test methods for determining the effect of saturation and accelerated water conditioning. These methods can be used to evaluate the effect of moisture with or without anti-stripping additives including liquids, such as amines, and fillers, such as hydrated lime or cement: - method A uses the indirect tensile strength of cylindrical specimens of bituminous mixtures; - method B uses the compression strength of cylindrical specimens of bituminous mixtures; - method C defines the bonding value of soft asphalt mixtures 1 h after mixing, where the bonding of bitumen and aggregate can be equated to a bonding value. Method A and method B give the same result on average. However, if the slenderness of the specimens is less than 0,5, method B is not suitable. Method C is suitable for soft asphalt mixtures with bitumen of viscosity at 60 ºC of 4000 mm2/s or less, for which methods A and B are not suitable. |
NEN-EN 12697-12 |
NEN-EN 12697-2 | Bepaling van de deeltjesgrootteverdeling._x000d_ NEN-EN 12697-2 specifies a procedure for the determination of the particle size distribution of the aggregates of bituminous mixtures by sieving. The test is applicable to aggregates recovered after binder extraction in accordance with EN 12697-1 or EN 12697-39. The applicability of this European Standard is described in the product standards for bituminous mixtures. |
NEN-EN 12697-2 |
NEN-EN 12697-23 | Bepaling van de splijttreksterkte van bitumineuze proefstukken._x000d_ This European Standard specifies a test method for determining the (splitting) indirect tensile strength of cylindrical specimens of bituminous mixtures._x000d_ |
NEN-EN 12697-23 |
NEN-EN 12697-24 | Weerstand tegen vermoeiing._x000d_ This European Standard specifies the methods for characterising the fatigue of bituminous mixtures by alternative tests, including bending tests and direct and indirect tensile tests. The tests are performed on compacted bituminous material under a sinusoidal loading or other controlled loading, using different types of specimens and supports. The procedure is used to rank bituminous mixtures on the basis of resistance to fatigue, as a guide to relative performance in the pavement, to obtain data for estimating the structural behaviour in the road and to judge test data according to specifications for bituminous mixtures. Because this European Standard does not impose a particular type of testing device, the precise choice of the test conditions depends on the possibilities and the working range of the used device. For the choice of specific test conditions, the requirements of the product standards for bituminous mixtures need to be respected. The applicability of this document is described in the product standards for bituminous mixtures. Results obtained from different test methods or using different failure criteria are not assured to be comparable. |
NEN-EN 12697-24 |
NEN-EN 12697-25 | Cyclische drukproef._x000d_ NEN-EN 12697-25 specifies three test methods (A1, A2 and B) for determining the resistance of bituminous mixtures to permanent deformation by cyclic compression tests with confinement. The tests make it possible to rank various mixtures or to check on the acceptability of a given mixture. They do not allow making a quantitative prediction of rutting in the field to be made. Test methods A1 and A2 describe methods for determining the creep characteristics of bituminous mixtures by means of a uniaxial cyclic compression test with some confinement present. In this test a cylindrical test specimen is subjected to a cyclic axial stress. Method A2 is preferred for mastic asphalt and Method A1 for other asphalt mixtures. To achieve a certain confinement, the diameter of the loading platen is taken smaller than that of the test specimen. In test method A1, the test specimen is loaded by block-pulses whereas in method A2 haversine loading with rest time is applied. Test method B describes the method for determining the creep characteristics of bituminous mixtures by means of the triaxial cyclic compression test. In this test a cylindrical test specimen is subjected to a defined confining stress and a cyclic axial stress. This test is most often used for the purpose of evaluation and development of new types of mixtures. This European Standard applies to test specimens prepared in the laboratory or cored from the road. The maximum size of the aggregates is 32 mm. |
NEN-EN 12697-25 |
NEN-EN 12697-26 | Stugheid._x000d_ This European Standard specifies the methods for characterising the stiffness of bituminous mixtures by alternative tests, including bending tests and direct and indirect tensile tests. The tests are performed on compacted bituminous material under a sinusoidal loading or other controlled loading, using different types of specimens and supports. The procedure is used to rank bituminous mixtures on the basis of stiffness, as a guide to relative performance in the pavement, to obtain data for estimating the structural behaviour in the road and to judge test data according to specifications for bituminous mixtures. As this standard does not impose a particular type of testing device the precise choice of the test conditions depends on the possibilities and the working range of the used device. For the choice of specific test conditions, the requirements of the product standards for bituminous mixtures should be respected. The applicability of this document is described in the product standards for bituminous mixtures. |
NEN-EN 12697-26 |
NEN-EN 12697-36 art. 4.1 | Het bepalen van de laagdikte._x000d_ This European Standard describes two test methods for determining the thickness of a bituminous pavement. The first method describes measurements carried out on one or more cores which have been drilled from the full depth of the slab or road structure (destructive method). The second method electro-magnetic (non-destructive) measurement are used. |
NEN-EN 12697-36 |
NEN-EN 12697-5 procedure A | Het bepalen van de dichtheid van het_x000d_ mengsel zonder ingesloten lucht._x000d_ This European Standard specifies test methods for determining the maximum density of a bituminous mixture (voidless mass). It specifies a volumetric procedure, a hydrostatic procedure and a mathematical procedure. The test methods described are intended for use with loose bituminous materials containing paving grade bitumens, modified binders or other bituminous binders used for hot mix asphalt. The tests are suitable for both fresh or aged bituminous materials. |
NEN-EN 12697-5 |
NEN-EN 12697-6 procedure B en D | Het bepalen van dichtheid van het_x000d_ proefstuk met ingesloten lucht._x000d_ This European Standard describes test methods for determining the bulk density of a compacted bituminous specimen. The test methods are intended for use with laboratory compacted specimens or specimens from the pavement after placement and compacting, either by coring or sawing. This European Standard describes the following four procedures, the choice of which is used being dependent on the estimated content and accessibility of voids in the specimen: a) bulk density - dry (for specimens with a very closed surface); b) bulk density - saturated surface dry (SSD) (for specimens with a closed surface); c) bulk density - sealed specimen (for specimens with an open or coarse surface); d) bulk density by dimensions (for specimens with a regular surface and with geometric shapes, i.e. squares, rectangles, cylinders, etc.). |
NEN-EN 12697-6 |
NEN-EN 12697-8 art. 4 | Het bepalen van het gehalte aan poriën_x000d_ (holle ruimte) |
NEN-EN 12697-8 |
NEN-EN 12880, incl. BRL 1801 bijlage L | Het aantonen van schadelijke_x000d_ bestanddelen voor de reactie van cement_x000d_ met water en de aantasting van_x000d_ wapeningsstaal. |
NEN-EN 12880 |
NEN-EN 13036-4 | Oppervlak-eigenschappen van weg- en vliegveldverhardingen - Beproevingsmethoden - Deel 4: Methode voor de meting van de stroefheid van een oppervlak - De slingerproef._x000d_ This European standard describes a method for determining the slip/skid resistance of a surface using a device which remains stationary at the test location. The slip/skid resistance is measured by means of a pendulum arm. The method provides a measure of the slip/skid resistance properties of a surface either in the field or in the laboratory. This method measures the slip/skid resistance of a small area of a surface (approximately 0,01 m2). This should be considered when deciding its applicability to a surface which may have non-homogeneous surface characteristics, e.g. containing ridges or grooves, or is rough textured (exceeding 1,2 mm mean texture depth). |
NEN-EN 13036-4 |
NEN-EN 13179-2 | Het bepalen van het bitumengetal. |
NEN-EN 13179-2 |
NEN-EN 13286-47 en NEN-EN 14227-2 Annex D | Het bepalen van het draagvermogen;_x000d_ normale en verzwaarde C.B.R.-proef. |
NEN-EN 13286-47 |
NEN-EN 1338 | Betonstraatstenen._x000d_ This European Standard specifies materials, properties, requirements and test methods for unreinforced cement bound concrete paving blocks and complementary fittings. It is applicable to precast concrete paving blocks and complementary fittings for pedestrian use, vehicular use and roof coverings, e.g. footpaths, precincts, cycle tracks, car parks, roads, highways, industrial areas (including docks and harbours), aircraft pavements, bus stations, petrol filling stations. In case of regular use of studded tyres additional requirements are sometimes needed. This standard does not deal with the tactility or visibility of blocks nor with permeable blocks. This standard provides for the product marking and the evaluation of conformity of the product to this European Standard. |
NEN-EN 1338 |
NEN-EN 1338 Annex I | Het bepalen van stroefheid van betonstraatstenen._x000d_ |
NEN-EN 1338 |
NEN-EN 13383-2 | Waterbouwsteen._x000d_ Deze Europese norm specificeert de beproevingsmethoden voor natuurlijke, kunstmatige en gerecyclede toeslagmaterialen voor gebruik als waterbouwsteen. |
NEN-EN 13383-2 |
NEN-EN 1339 | Betontegels._x000d_ This European Standard specifies materials, properties, requirements and test methods for cement bound unreinforced concrete paving flags and complementary fittings. It is applicable to precast concrete paving flags and complementary fittings that are particularly for use in external trafficked paved areas and roof coverings. In case of regular use of studded tyres additional requirements are sometimes needed. This standard does not deal with the tactility or visibility of flags nor with permeable flags. This standard provides for the product marking and the evaluation of conformity of the product to this European Standard. |
NEN-EN 1339 |
NEN-EN 1339 Annex I | Het bepalen van stroefheid van betontegels. |
NEN-EN 1339 |
NEN-EN 1340 | Betonbanden._x000d_ This European Standard specifies materials, properties, requirements and test methods for unreinforced, cement bound precast concrete kerb units, channels and complementary fittings, that are for use in trafficked paved areas and roof coverings. The units are used to fulfil one or more of the following: Separation, physical or visual delineation, the provision of drainage or the containment of paved areas or other surfacing. In case of regular use of studded tyres, additional requirements are sometimes needed. This standard provides for the product marking and the evaluation of conformity of the product to this European standard. Apart from the tolerances, this standard does not include requirements for cross-sections, shapes and dimensions. This standard does not deal with the tactility or visibility of kerbs. |
NEN-EN 1340 |
NEN-EN 1340 Annex I | Het bepalen van stroefheid van betonbanden. |
NEN-EN 1340 |
NEN-EN 1367-1 | Het bepalen van de bestandheid tegen_x000d_ vriezen en dooien._x000d_ This European Standard specifies a test method which provides information on how an aggregate behaves when it is subjected to the cyclic action of freezing and thawing. |
NEN-EN 1367-1 |
NEN-EN 1367-2 | Het bepalen van de thermische_x000d_ eigenschappen en de bestandheid tegen_x000d_ verwering van toeslagmaterialen_x000d_ (magnesiumsulfaatproef)._x000d_ This European Standard describes the reference method used for type testing and in cases of dispute for assessing how an aggregate behaves when subjected to the cyclic action of immersion in magnesium sulfate, followed by oven drying. |
NEN-EN 1367-2 |
NEN-EN 1367-5 | Het bepalen van de weerstand tegen_x000d_ kortstondige verhitting._x000d_ This European Standard specifies methods for the determination of resistance to thermal shock of aggregates, subject to heating and drying in the production of hot bituminous mixtures. This standard describes the reference method use for type testing and in case of dispute. For the purpose of type testing and in case of dispute only the reference method should be used. |
NEN-EN 1367-5 |
NEN-EN 1426 | Bepaling van de naaldpenetratie._x000d_ NEN-EN 1426 specifies a method for determining the consistency of bitumen and bituminous binders. Normal procedure is described for penetrations up to (330 × 0,1) mm, but for penetrations above this value, up to (500 × 0,1) mm, different operating parameters are necessary. |
NEN-EN 1426 |
NEN-EN 1427 | Bepaling van het verwekingspunt - Ring- en kogelmethode._x000d_ NEN-EN 1427 specifies a method for the determination of the softening point of bitumen and bituminous binders in the range of 28 °C to 150 °C. Technical warning - The change from mercury thermometers to electronic temperature devices has revealed that the temperature definition in the mercury thermometer has not been precise enough to make a correct, unbiased transfer to electronic devices. Care should be taken for softening points ring and ball above 100 °C as the condition may have changed from previous practise to present days testing equipment. Below approx. 100 °C the difference in temperature readings between electronic and mercury stem thermometer is acceptable compared to the repeatability of this test methods. [Reference: ASTM E20 Group] |
NEN-EN 1427 |
NEN-EN 1436 Annex D | Het bepalen van stroefheid van wegmarkering. |
NEN-EN 1436 |
NEN-EN 1744-1 art 12 | Het bepalen van het gehalte aan in zuur_x000d_ oplosbare sulfaten._x000d_ Determination of acid soluble sulfates. |
NEN-EN 1744-1 |
NEN-EN 1744-1 art. 7 | Het bepalen van het gehalte aan_x000d_ chloride._x000d_ Determination of water-soluble chloride salts using the Volhard method. |
NEN-EN 1744-1 |
NEN-EN 1744-1 art.11 | Het bepalen van het totale gehalte aan_x000d_ zwavel._x000d_ Determination of total sulfur content. |
NEN-EN 1744-1 |
NEN-EN 1744-1 art.14.1 | Het bepalen van het gehalte aan_x000d_ reactieve ijzersulfidedeeltjes._x000d_ Examination for the presence of reactive iron sulfide particles. |
NEN-EN 1744-1 |
NEN-EN 1744-1 art.14.2 | Het bepalen van het gehalte aan lichte_x000d_ stukken materiaal._x000d_ Determination of lightweight contaminators. |
NEN-EN 1744-1 |
NEN-EN 1744-1 art.15.1 | Het bepalen van het humusgehalte_x000d_ (natronloogproef)._x000d_ Determination of potential presence of humus. |
NEN-EN 1744-1 |
NEN-EN 1744-1 art.15.2 | Het bepalen van het gehalte aan_x000d_ fulvozuur._x000d_ Determination of fulvo acid content. |
NEN-EN 1744-1 |
NEN-EN 1744-1 art.16.2 | Het bepalen van de wateroplosbaarheid._x000d_ Determination of water solubility of filler. |
NEN-EN 1744-1 |
NEN-EN 1744-4 | Het bepalen van de watergevoeligheid._x000d_ This European Standard specifies the procedure for the determination of the water susceptibility of fillers for bituminous mixtures, by separation of filler from a bitumen filler mixture. A method for the determination of water susceptibility by volume increase and loss of stability of a Marshall specimen is described in Annex A. |
NEN-EN 1744-4 |
NEN-EN 196-1 | Het vervaardigen van mortelprisma’s en_x000d_ cementmortel en het bepalen van de_x000d_ druksterkte._x000d_ This part of EN 196 describes the method for the determination of the compressive and, optionally, the flexural strength of cement mortar. The method applies to common cements and to other cements and materials, the standards for which call up this method. It may not apply to other cement types that have, for example, a very short initial setting time. The method is used for assessing whether the compressive strength of cement is in conformity with its specification and for validation testing of a CEN Standard sand, EN 196-1, or alternative compaction equipment. This part of EN 196 describes the reference equipment and procedure and allows alternative compaction equipment and procedures to be used provided that they have been validated in accordance with the appropriate provisions in this document. In the event of a dispute, only the reference equipment and procedure are used. |
196-1 |
NEN-EN 196-2 (artikelen 4.4.1, 4.4.2, 4.4.3 en 4.5.16) | Determination of loss on ignition._x000d_ Determination of sulfate._x000d_ Determination of residue insoluble in hydrochloric acid and sodium carbonate._x000d_ Determination of chloride. |
NEN-EN 196-2 |
NEN-EN 196-2 art. 4.5.17 | Determination of carbon dioxide (reference method)._x000d_ Het bepalen van het_x000d_ koolstofdioxidegehalte |
NEN-EN 196-2 |
NEN-EN 196-3 | Bepaling van begin en einde van de binding en bepaling van de vormhoudendheid._x000d_ Het bepalen van de vormhoudendheid_x000d_ (proef van Le Chatelier._x000d_ NEN-EN 196-3 specifies the methods for determining standard consistence, setting times and soundness of cements. The method applies to common cements and to other cements and materials, the standards for which call up this method. It may not apply to other cement types that have, for example, a very short initial setting time. The method is used for assessing whether the setting time and soundness of a cement is in conformity with its specification. This part of EN 196 describes the reference methods and allows the use of alternative procedures and equipment, as indicated in notes, provided that they have been calibrated against the reference methods. In the event of a dispute, only the reference equipment and procedures are used. |
NEN-EN 196-3 |
NEN-EN 459-2 art. 5.8 | Available lime._x000d_ De bepaling van het beschikbare_x000d_ kalkgehalte. |
NEN-EN 459-2 |
NEN-EN 933-1 | Het bepalen van de_x000d_ korrelgrootteverdeling._x000d_ This European Standard describes the reference washing and dry sieving method used for type testing and in case of dispute, for determination of the particle size distribution of aggregates. For other purposes, in particular factory production control, other methods may be used, provided that an appropriate working relationship with the reference method has been established. It applies to all aggregates, including lightweight aggregates, up to 90 mm nominal size, but excluding filler. |
NEN-EN 933-1 |
NEN-EN 933-10 | Het bepalen van de korrelverdeling_x000d_ (luchtstraalzeefanalyse)._x000d_ This European Standard describes the reference method used for type testing and in cases of dispute for determining the particle size distribution up to 2 mm size of natural or manufactured origin filler aggregate using air jet sieving. For other purposes, in particular factory production control, other methods may be used provided that an appropriate working relationship with the reference method has been established. |
NEN-EN 933-10 |
NEN-EN 933-11 | Het bepalen van de samenstelling_x000d_ (classificatieproef)._x000d_ This European Standard describes a simple method for the examination of coarse recycled aggregates for the purpose of identifying and estimating the relative proportions of constituent materials. This reference test method should be used for type testing and in case of dispute. For other purposes, in particular factory production control, other methods may be used provided that an appropriate working relationship with the reference method has been established. |
NEN-EN 933-11 |
NEN-EN 933-3 | Het bepalen van de korrelvorm._x000d_ This European Standard describes the reference method, used for type testing and in case of dispute, for determination of the flakiness index of aggregates. For other purposes, in particular production control, other methods may be used, provided that an appropriate working relationship with the reference method has been established. This European Standard applies to natural, manufactured or recycled aggregates. The test procedure specified in this part of this European Standard is not applicable to particle sizes less than 4 mm or greater than 100 mm. |
NEN-EN 933-3 |
NEN-EN 933-5 | Het bepalen van het percentage aan_x000d_ gebroken oppervlakken._x000d_ Specifies a method for the determination of the percentage of particles with crushed and broken surface in a sample of natural coarse aggregate. It applies to gravel or mixed aggregate containing gravel. |
NEN-EN 933-5 |
NEN-EN 933-6 art. 8 | Het bepalen van de stroomcoëfficiënt._x000d_ NEN-EN 933-6 specifies the reference method used for type testing, and in case of dispute, for determining the flow coefficient of coarse and fine aggregates. For other purposes, in particular factory production control, other methods may be used provided that an appropriate working relationship with the reference method has been established. Examples of advanced test methods can be found in the Bibliography. This European Standard applies to coarse aggregate of sizes between 4 mm and 20 mm and to fine aggregate of size up to 2 mm. |
NEN-EN 933-6 |
NEN-EN 933-7 | Het bepalen van het gehalte aan_x000d_ schelpen._x000d_ Specifies a method for the determination of shell content of coarse aggregates. It applies to gravel or mixed aggregate containing gravel. |
NEN-EN 933-7 |
NEN-EN 933-8 | Het bepalen van het gehalte aan fijn_x000d_ materiaal (zandequivalentproef)._x000d_ NEN-EN 933-8+A1 describes the reference method used for type testing and in case of dispute for the determination of the sand equivalent value of 0/2 mm fraction (for 0/4 mm, see Annex A) in fine aggregates or all-in aggregates. For other purposes, in particular factory production control, other methods may be used provided that an appropriate working relationship with the reference method has been established. |
NEN-EN 933-8 |
NEN-EN 933-9 | Het bepalen van het gehalte aan fijn_x000d_ materiaal (methyleenblauwproef)._x000d_ This standard describes the reference method used for type testing and in cases of dispute for the determination of the methylene blue value of the 0/2 mm fraction in fine aggregates or all-in aggregates (MB). It also describes the reference method for the determination of the methylene blue value of the 0/0,125 mm fraction (MBF) in Annex A. For other purposes, in particular factory production control, other methods may be used provided that an appropriate working relationship with the suitable reference method has been established. |
NEN-EN 933-9 |
proef 77.3 RAW 2015 | Het aantonen van PAK; DLC |
proef 77.3 RAW 2015 |
Proef 1 (RAW 2010; RAW 2015) | Het bepalen van de korrelverdeling (areometerproef) |
RAW proef 1 |
proef 10 (RAW 2010; RAW 2015) | Het bepalen van de éénpuntsproctor. |
RAW proef 10 |
proef 11 (RAW 2010; RAW 2015) | Het bepalen van de korrelverdeling. |
RAW proef 11 |
proef 13 (RAW 2010; RAW 2015) | Waterdoorlatendheid (normale proef) |
RAW proef 13 |
proef 14 (RAW 2010; RAW 2015) | Plasticiteit van grond. |
RAW proef 14 |
proef 15 (RAW 2010; RAW 2015) | Fijnheidsgetal. |
RAW proef 15 |
proef 18 (RAW 2010; RAW 2015) | Druksterkte van een uit een gebonden fundering geboorde cilinder. |
RAW proef 18 |
proef 19 (RAW 2010; RAW 2015) | Fulvozuurproef. |
RAW proef 19 |
proef 2 (RAW 2010; RAW 2015) | Het bepalen van het gehalte aan minerale deeltjes door zeef 63um. |
RAW proef 2 |
proef 20 (RAW 2010; RAW 2015) | pH-methode |
RAW proef 20 |
proef 28 (RAW 2010; RAW 2015) | Het bepalen van het gloeiverlies en het_x000d_ organische-stofgehalte |
RAW proef 28 |
proef 28 (RAW 2010; RAW 2015) | Gloeiverlies, organische stof en CaCo3-gehalte. |
RAW proef 28 |
proef 29 (RAW 2010; RAW 2015) | Textuurbepaling (lutumgehalte, leemgehalte en M50-cijfer). |
RAW proef 29 |
proef 3 (RAW 2010; RAW 2015) | Het bepalen van de verdichtingsgraad van aardebaan- of funderingsmateriaal. |
RAW proef 3 |
Proef 35 (RAW 2010; RAW 2015) | Het bepalen van het gehalte aan_x000d_ bestanddelen. |
RAW proef 35 |
proef 36 (RAW 2010; RAW 2015) | Gehalte aan organisch stof van grond. |
RAW proef 36 |
proef 37 (RAW 2010; RAW 2015) | Massaverlies bij zoutzuurbehandeling van grond. |
RAW proef 37 |
proef 38 (RAW 2010; RAW 2015) | Zoutgehalte van grond. |
RAW proef 38 |
Proef 53 (RAW 2010; RAW 2015) | Het bepalen van de laagdikte. |
RAW proef 53 |
proef 6 (RAW 2010; RAW 2015) | Het bepalen van de verdichting in situ;_x000d_ steekringmethode |
RAW proef 6 |
proef 64 (RAW 2010; RAW 2015) | Het bepalen van de laagdikte. |
RAW proef 64 |
proef 66 (RAW 2010; RAW 2015) | Het bepalen van de verdichtingsgraad. |
RAW proef 66 |
proef 67 (RAW 2010; RAW 2015) | Het bepalen van dichtheid van het_x000d_ proefstuk met ingesloten lucht |
RAW proef 67 |
proef 68 (RAW 2010; RAW 2015) | Het bepalen van de dichtheid van het_x000d_ mengsel zonder ingesloten lucht. |
RAW proef 68 |
proef 69 (RAW 2010; RAW 2015) | Het bepalen van het gehalte aan poriën_x000d_ (holle ruimte) |
RAW proef 69 |
proef 7 (RAW 2010; RAW 2015) | Het bepalen van dichtheid in situ;_x000d_ grindmethode |
RAW proef 7 |
proef 76 RAW 2000 | Het bepalen van stroefheid. |
RAW 2000 proef 76 |
proef 77.1 77.2 (RAW 2015) | Het aantonen van PAK (inclusief_x000d_ beschrijving van de constructieopbouw_x000d_ per gemeten laagdikte) |
RAW proef 77.1 77.2 |
Proef 79 (RAW 2010; RAW 2015) | Het bepalen van de dichtheid. |
RAW proef 79 |
proef 8 (RAW 2010; RAW 2015) | Het bepalen van de verdichting in situ;_x000d_ nucleaire methode. |
RAW proef 8 |
proef 9 (RAW 2010; RAW 2015) | Het bepalen van het verband tussen het vochtgehalte en de dichtheid (proctorproef) |
RAW proef 9 |
Residential solid fuel burning appliances
Accredited: Yes
Capability | Description | Standard |
---|---|---|
All central heating fittings and accessories | Testing of all types of fittings and accessories used in domestic central heating systems. _x000d_ Capable of performing capture capacity tests (for all types of system filters), high pressure tests, pressure drop tests and life cycle simulations for all components. Kiwa Gastec (UK) have developed unique experiment rigs for each of these specific tests. _x000d_ No universal standards exist for these tests and so Kiwa follow an in-house test standard that we have developed ourselves. |
Documented In-House Method |
Central heating water additives | Testing of central heating additives which circulate within the central heating water. Test of additives which work against corrosion, scale, oxide sludge can be conducted. We are also capable of testing additives which seal central heating leaks whilst they circulate within the water. Kiwa Gastec (UK) have designed and built a unique rig for running experiments specific to the testing of these additives. |
Documented In-House Method |
Combustion performance tests in gravity-feed central heating boiler | Combustion performance tests in gravity-feed central heating boilers, testing the use of naturally occurring smokeless solid fuels. |
Fuel testing procedure No 20.1 Fuel testing procedure No 20 |
Combustion performance tests in inset open fires | Combustion performance tests in inset open fires. Used to test bituminous coal fuels. |
Fuel testing procedure No 19 |
Combustion performance tests in inset room heater | Combustion performance tests in inset room heaters, testing naturally occurring smokeless solid fuels. |
Fuel testing procedure No 15.1 |
Combustion performance tests in: gravity feed central heating boiler, inset room heaters and inset open fires | Combustion performance tests in: gravity feed central heating boiler, inset room heaters and inset open fires. Testing manufactured solid smokeless fuels. |
Fuel testing procedure No 15.1 Fuel testing procedure No 19.1 Fuel testing procedure No 20 Fuel testing procedure No 20.1 Fuel testing procedure No 19 |
Construction and performance tests on residential space heating appliances fired by wood pellets | Construction tests on residential space heating appliances fired by wood pellets. Construction and performance tests all exclude Quality of Materials; Quality of Welding; Pressure Testing of Boiler; Testing of Screw Threads; Quality of Vitreous Enamel Finish; Measurement of Thickness of Enamelled Components; Dress Guard Testing. |
BS EN 14785:2006 |
Decorative fuel effects gas appliances | Construction and performance tests on decorative fuel effects gas appliances. Construction and performance tests all exclude Quality of Materials; Quality of Welding; Pressure Testing of Boiler; Testing of Screw Threads; Quality of Vitreous Enamel Finish; Measurement of Thickness of Enamelled Components; Dress Guard Testing. |
BS EN 509:2000 |
Dedicated liquefied petroleum gas appliances - barbecues for outdoor use contact grills included | Construction and performance tests on dedicated liquefied petroleum gas appliances - barbecues for outdoor use contact grills included. Construction and performance tests all exclude Quality of Materials; Quality of Welding; Pressure Testing of Boiler; Testing of Screw Threads; Quality of Vitreous Enamel Finish; Measurement of Thickness of Enamelled Components; Dress Guard Testing. |
BS EN 498:2000 |
Domestic hot water heating combination boilers with forced draught atomising oil burners of nominal heat input not exceeding 70kW | Construction and performance tests on domestic hot water heating combination boilers with forced draught atomising oil burners of nominal heat input not exceeding 70kW. Construction and performance tests all exclude Quality of Materials; Quality of Welding; Pressure Testing of Boiler; Testing of Screw Threads; Quality of Vitreous Enamel Finish; Measurement of Thickness of Enamelled Components; Dress Guard Testing. |
BS EN 303-6:2000 |
Firelighters: Ignition performance test | Ignition performance testing of firelighters. |
Fuel testing procedure No 21 |
Gas fired storage water heaters for the production of domestic hot water | Efficiency testing |
BS EN 89:2000 |
Gas-fired central heating - type C boilers of nominal heat input not exceeding 70 kW | Efficiency testing |
BS EN 483:1999+A4:2007 |
Gas-fired central heating boilers - assembly comprising a boiler body and a forced draught burner | Efficiency tests |
BS EN 303-3:1999 |
Gas-fired domestic appliances producing hot water. Assessment of energy consumption and/or effciency | Testing of gas-fired heaters, water heaters, hot-water supply systems, domestic, hot-water boilers, instantaneous water heaters, storage water heaters, gas-powered devices for performance and energy consumption, involving mathematical calculations regarding testing conditions and performance testing. These tests help to create an assessment of the hot water appliances and calculate their energy consumption and efficiencies. |
EN 13203-2 |
Gas-fired heating boilers - type B11 and B11BS boilers fitted with atmospheric burners for nominal heat input not exceeding 70kW | Efficiency tests |
BS EN 297:1994 |
Gravimetric and optical measurement of smoke emission | Gravimetric and optical measurement of smoke emission tests run on smoke reducing solid fuel burning domestic appliances |
PD 6434:1969 Solid fuel appliance testing procedure No 12.1 |
Gravimetric measurement of smoke emission in all types of solid fuels | Gravimetric measurement of smoke emission in all types of solid fuels |
Fuel testing procedure No 18 |
Heating Boilers for solid fuels, manually and automatically stoked, nominal heat output of up to 300kW | EN BS 303-5:2012 (excluding claused 4.2.2, 4.2.3, 4.3.9.2, 5.4 and 5.5) |
BS EN 303-5:2012 |
Heating boilers with atomising oil burners | Construction and performance tests on heating boilers with atomising oil burners. Construction and performance tests all exclude Quality of Materials; Quality of Welding; Pressure Testing of Boiler; Testing of Screw Threads; Quality of Vitreous Enamel Finish; Measurement of Thickness of Enamelled Components; Dress Guard Testing. |
BS EN 304:1992 |
Heating boilers with forced draught atomising oil burners | Construction and performance tests on heating boilers with forced draught atomising oil burners. Construction and performance tests all exclude Quality of Materials; Quality of Welding; Pressure Testing of Boiler; Testing of Screw Threads; Quality of Vitreous Enamel Finish; Measurement of Thickness of Enamelled Components; Dress Guard Testing. |
BS EN 303-2:1999 |
Heating boilers with forced draught burners | Construction and performance tests on heating boilers with forced draught burners. Construction and performance tests all exclude Quality of Materials; Quality of Welding; Pressure Testing of Boiler; Testing of Screw Threads; Quality of Vitreous Enamel Finish; Measurement of Thickness of Enamelled Components; Dress Guard Testing. |
EN 303-1:1999 |
Heating boilers with forced draught burners with outputs up to 70kW and a maximum operating pressure of 3 bar | Construction and performance tests on heating boilers with forced draught burners with outputs up to 70kW and a maximum operating pressure of 3 bar. Construction and performance tests all exclude Quality of Materials; Quality of Welding; Pressure Testing of Boiler; Testing of Screw Threads; Quality of Vitreous Enamel Finish; Measurement of Thickness of Enamelled Components; Dress Guard Testing. |
EN 303-4:1999 |
Hydrocarbons emissions testing | Residential solid fuel burning appliances |
CEN/TS 15883: 2009 |
Independent gas fired convection heaters | Construction and performance testing on independent gas fired convection heaters. Construction and performance tests all exclude Quality of Materials; Quality of Welding; Pressure Testing of Boiler; Testing of Screw Threads; Quality of Vitreous Enamel Finish; Measurement of Thickness of Enamelled Components; Dress Guard Testing. |
BS EN 613:2001 |
Independent gas fired flueless space heaters for nominal heat input not exceeding 6kW | construction and performance tests on i0ndependent gas fired flueless space heaters for nominal heat input not exceeding 6kW. Construction and performance tests all exclude Quality of Materials; Quality of Welding; Pressure Testing of Boiler; Testing of Screw Threads; Quality of Vitreous Enamel Finish; Measurement of Thickness of Enamelled Components; Dress Guard Testing. |
BS EN 14829:2007 |
Inset appliances including open fire fired by solid fuels | Construction and performance tests on inset appliances including open fire fired by solid fuels. Construction and performance tests all exclude Quality of Materials; Quality of Welding; Pressure Testing of Boiler; Testing of Screw Threads; Quality of Vitreous Enamel Finish; Measurement of Thickness of Enamelled Components; Dress Guard Testing. |
BS EN 13229:2001 +A2:2004 |
Magnetic and non-magnetic central heating filters | Testing of filters which remove magnetic and non-magnetic particles that circulate in domestic central heating systems. _x000d_ Capable of performing capture capacity tests, high pressure tests, pressure drop tests and life cycle simulations. Kiwa Gastec (UK) have developed unique experiment rigs for each of these specific tests. _x000d_ No universal standards exist for these tests and so Kiwa follow an in-house test standard that we have developed ourselves. |
Documented In-House Method |
Non-domestic forced convection gas-fired air heaters for space heating not exceeding a net heat input of 300kW, incorporating a fan to assist transportation of combustion air or combustion products | Efficiency testing |
EN 1020:2009 |
NOx emissions testing | Residential solid fuel burning appliances |
CEN/TS 15883: 2009 |
Oil fired cookers with or without boilers with heat outputs up to 45 kW | Construction and performance tests on oil fired cookers with or without boilers with heat outputs up to 45 kW. Construction and performance tests all exclude Quality of Materials; Quality of Welding; Pressure Testing of Boiler; Testing of Screw Threads; Quality of Vitreous Enamel Finish; Measurement of Thickness of Enamelled Components; Dress Guard Testing. |
OFTEC Oil Fired Appliance Standard OFS-A101:2005 |
Oil -fired forced convection air heaters - stationary and transportable for space heating. | Efficiency measurement (by losses method) on oil -fired forced convection air heaters - stationary and transportable for space heating. |
BS EN 13842:2004 |
Oil fired heating boilers with atomising burners with outputs up to 70kW | Construction and performance tests on oil fired heating boilers with atomising burners with outputs up to 70kW. Construction and performance tests all exclude Quality of Materials; Quality of Welding; Pressure Testing of Boiler; Testing of Screw Threads; Quality of Vitreous Enamel Finish; Measurement of Thickness of Enamelled Components; Dress Guard Testing. |
OFTEC Oil fired appliance standard OFS-A100:2004 |
Particulates emissions | Residential solid fuel burning appliances |
CEN/TS 15883: 2009 |
Residual cookers fired by solid fuel | Construction and performance tests residual cookers fired by solid fuel. Construction and performance tests all exclude Quality of Materials; Quality of Welding; Pressure Testing of Boiler; Testing of Screw Threads; Quality of Vitreous Enamel Finish; Measurement of Thickness of Enamelled Components; Dress Guard Testing. |
BS EN 12815:2001 +A1:2004 |
Residual independent boilers fired by solid fuel - nominal heat output up to 50 kW. | Construction and performance tests on residual independent boilers fired by solid fuel - nominal heat output up to 50 kW. Construction and performance tests all exclude Quality of Materials; Quality of Welding; Pressure Testing of Boiler; Testing of Screw Threads; Quality of Vitreous Enamel Finish; Measurement of Thickness of Enamelled Components; Dress Guard Testing. |
BS EN 12809:2001 + A1:2004 |
Roomheaters fired by solid fuel | Construction and performance tests on roomheaters fired by solid fuel. Construction and performance tests all exclude all exclude Quality of Materials; Quality of Welding; Pressure Testing of Boiler; Testing of Screw Threads; Quality of Vitreous Enamel Finish; Measurement of Thickness of Enamelled Components; Dress Guard Testing. |
BS EN 13240:2001 +A2:2004 |
Slow heat release appliances fired by solid fuel | Construction and performance testing on slow heat release appliances fired by solid fuel. Construction and performance tests all exclude Quality of Materials; Quality of Welding; Pressure Testing of Boiler; Testing of Screw Threads; Quality of Vitreous Enamel Finish; Measurement of Thickness of Enamelled Components; Dress Guard Testing. |
BS EN 15250:2007 |
Steam, hot water and high temperature heat transfer fluid boilers | Thermal performance tests. Includes_x000d_ thermal performance of biomass boilers using indirect (losses) method (incorporating Amendment 1) |
BS 845-1:1987 |
Structural adhesives - Testing of adhesively bonded joints - Bead peel test
Accredited: Yes
Capability | Description | Standard |
---|---|---|
Appliances having one or more burners with an automatic buner control system | Domestic cooking appliances burning gas-Safety- Appliances having one or more burners with an automatic buner control system |
EN 30-1-4 EN 30-1-4 |
Luminous radiant heaters | Non-domestic gas-fired overhead luminous radiant heaters - Safety_x000d_ - Single burner gas-fired overhead radiant tube heaters for non- domestic use - Rational use of energy |
EN 419-2 EN 419-2 EN 419-1 EN 419-1 |
Air heaters | Non- Domestic direct gas fired forced convection air heaters for space heating not exceeding a net heat input of 300 kW |
EN 525 EN 525 |
Appliances for heating liquids | Safety of household and similar electrical appliances and particular requirements appliances for heating |
EN IEC 60335-2-15:2003 EN IEC 60335-2-15:2003 |
Appliances having a glass ceramic hotplate | Domestic cooking appliances burning gas - Safety - Appliances having a glass ceramic hotplate |
EN 30-1-3 EN 30-1-3 |
Aquarium luminaires | General requirements and tests of luminaires for aquarium luminaires |
EN IEC 60598-2-11 EN IEC 60598-2-11 |
Assessment of energy consumption | Gas-fired domestic appliances producing hot water - Appliances not exceeding 70 kW heat input and 300 l water storage capacity - Part 2: Assessment of energy consumption |
EN 13203-2 EN 13203-2 |
Assessment of performance of hot water deliveries | Gas-fired domestic appliances producing hot water - Appliances not exceding 70 kW heat input and 300 l water storage capacity - Part 1: Assessment of performance of hot water deliveries |
EN 13203-1 EN 13203-1 |
Ball Pressure Test - Fire hazard testing | This part of IEC 60695 specifies the ball pressure test as a method for evaluating the softening temperature and accelerated material flow under load of polymeric materials and parts of end products in their ability to resist abnormal heat. |
EN 60695-10-2 EN 60695-10-2 |
Barbecues | Specification for dedicated liquefied petroleum gas appliances - Barbecues for outdoor use contact grills included |
EN 498 EN 498 |
Battery chargers | Safety of household and similar electrical appliances and particular requirements for battery chargers |
EN 60335-2-29:2004 +A1 +A2 EN 60335-2-29:2004 +A1 +A2 |
Bend tests | Destructive tests on welds in metallic materials - Bend tests |
EN ISO 5173 EN ISO 5173 |
Boiling pans | Gas heated catering equipment - Specific requirements - Boiling pans |
EN 203-2-3 EN 203-2-3 |
Brat pans and paëlla cookers | Gas heated catering equipment - Specific requirements - Brat pans and paëlla cookers |
EN 203-2-8 EN 203-2-8 |
Burners | Automatic forced draught burners for gaseous fuels |
EN 676 EN 676 |
Carbon monoxide detector test | Electrical apparatus for the detection of carbon monoxide in domestic premises. Part 1: Test methods and performance requirements |
EN 50291-1 EN 50291-1 |
Chargrills | Gas heated catering equipment - Specific requirements - Chargrills |
EN 203-2-10 EN 203-2-10 |
Clothes dryers and towel rails | Safety of household and similar electrical appliances and particular requirements for clothes dryers and towel rails |
EN IEC 60335-2-43 EN IEC 60335-2-43 |
Commercial dispensing appliances and vending machines | Safety of household and similar electrical appliances and particular requirements for commercial dispensing appliances and vending machines |
EN IEC 60335-2-75:2004 EN IEC 60335-2-75:2004 |
Commercial electric bains-marie | Safety of household and similar electrical appliances and particular requirements for commercial electric bains-marie |
EN IEC 60335-2-50:2003 EN IEC 60335-2-50:2003 |
Commercial electric boling pans | Safety of household and similar electrical appliances and particular requirements for commercial electric boling pans |
EN IEC 60335-2-47:2003 EN IEC 60335-2-47:2003 |
Commercial electric cooking ranges, ovens, hobs and hob elements | Safety of household and similar electrical appliances and particular requirements for commercial electric cooking ranges, ovens, hobs and hob elements |
EN IEC 60335-2-36:2004 EN IEC 60335-2-36:2004 |
Commercial electric forced convection ovens, steam cookers and steam convection ovens | Safety of household and similar electrical appliances and particular requirements for commercial electric forced convection ovens, steam cookers and steam convection ovens |
EN IEC 60335-2-42:2003 EN IEC 60335-2-42:2003 |
Commercial electric griddles and griddle grills | Safety of household and similar electrical appliances and particular requirements for commercial electric griddles and griddle grills |
EN IEC 60335-2-37:2004 EN IEC 60335-2-37:2004 |
Commercial electric griddles and griddle grills | Safety of household and similar electrical appliances and particular requirements for commercial electric griddles and griddle grills |
EN IEC 60335-2-38:2003 EN IEC 60335-2-38:2003 |
Commercial electric hot cupboards | Safety of household and similar electrical appliances and particular requirements for commercial electric hot cupboards |
EN IEC 60335-2-49 EN IEC 60335-2-49 |
Commercial electric kitchen machines | Safety of household and similar electrical appliances and particular requirements for commercial electric kitchen machines |
EN IEC 60335-2-64 EN IEC 60335-2-64 |
Commercial electric multi-purpose cooking pans | Safety of household and similar electrical appliances and particular requirements for commercial electric multi-purpose cooking pans |
EN IEC 60335-2-39:2003 EN IEC 60335-2-39:2003 |
Commercial grillers and toasters | Safety of household and similar electrical appliances and particular requirements for commercial grillers and toasters |
EN IEC 60335-2-48:2003 EN IEC 60335-2-48:2003 |
Convection Heaters | Independed gas fired convection heaters |
EN 613 EN 613 |
Decorative fuel-effect gas appliances | Decorative fuel-effect gas appliances |
EN 509 EN 509 |
Deep fat fryers, frying pans and similar appliances | Safety of household and similar electrical appliances and particular requirements for deep fat fryers, frying pans and similar appliances |
EN 60335-2-13:2010 EN 60335-2-13:2010 |
Degrees of protection provided by enclosures (IP code) (For electrical equipments) | This standard applies to the classification of degrees of protection provided by encloswes for electrical equipment with a rated voltage not exceeding 72.5 kV. |
EN 60529:2013 EN 60529:2013 |
Domestic Cookers | General requirements relating to the domestic cookers for use with liquefied petroleum gases (LPG)_x000d_ &_x000d_ Methods of test for domestic cookers for use with liquefied petroleum gases_x000d_ All Tests can be performed. |
SASO 167 SASO 167 SASO 168 SASO 168 |
Domestic cooking - Rational use of energy | Domestic cooking appliances burning gas - Rational use of energy-General |
EN 30-2-1 EN 30-2-1 |
Domestic cooking appliances burning gas | Domestic cooking appliances burning gas - Safety - General |
EN 30-1-1 EN 30-1-1 |
Electric irons | Safety of household and similar electrical appliances and particular requirements for electric irons |
EN 60335-2-3 EN 60335-2-3 |
Electrical apparatus for the detection of combustible gases in domestic premises | Test methods and performance requirements of electrical apparatus for the detection of combustible gases in domestic premises |
EN 50194-1 EN 50194-1 |
Electrical equipment of machines | Safety of machinery |
EN 60204-1:2006 EN 60204-1:2006 |
Environmental testing - Tests A: Cold | This standards deals with cold tests applicable to both non heat-dissipating and heat-dissipating specimens. For non heat-dissipating specimens, Tests Ab and Ad do not deviate essentially from earlier issues. Test Ae has been added primarily for testing equipment that requires being operational throughout the test, including the conditioning periods. The object of the cold test is limited to the determination of the ability of components, equipment or other articles to be used, transported or stored at low temperature. |
EN 60068-2-1 EN 60068-2-1 |
Environmental testing - Part 1: General and guidance | The IEC 60068 series includes a series of methods for environmental testing along with their appropriate severities, and prescribes various atmospheric conditions for measurements and tests designed to assess the ability of specimens to perform under expected conditions of transportation, storage and all aspects of operational use. |
EN 60068-1 EN 60068-1 |
Environmental testing - Test B: Dry heat | This standard deals with dry heat tests applicable both to heat-dissipating and non heat dissipating specimens. |
EN 60068-2-2 EN 60068-2-2 |
Environmental testing - Test Cab: Damp heat, steady state | Test Cab: Damp heat, steady state |
EN 60068-2-78 EN 60068-2-78 |
Environmental testing - Test Db: Damp heat, cyclic (12 h + 12 h cycle) | To determine of suitability of components, equipment or other articles for use and storage under conditions of high humidity when combined with cyclic temperature changes and, in general, producing under station on the surface of the specimen |
EN 60068-2-30 EN 60068-2-30 |
Extra low-voltage lighting systems for filament lamps | General requirements and tests of luminaires for extra low-voltage lighting systems for filament lamps |
EN 60598-2-23 EN 60598-2-23 |
Fire hazard testing - Glowing/hot-wire based test methods | Glow-wire flammability index (GWFI) test method for materials |
EN IEC 60695-2-12 EN IEC 60695-2-12 |
Fire hazard testing – Glowing/hot-wire based test methods | Glow-wire flammability test method for end-products (GWEPT) |
EN IEC 60695-2-11 EN IEC 60695-2-11 |
Fire hazard testing – Glowing/hot-wire based test methods | Glow-wire ignition temperature (GWIT) test method for materials |
EN IEC 60695-2-13 EN IEC 60695-2-13 |
Fire hazard testing - Needle-flame test method | This part of IEC 60695 specifies a needle-flame test to simulate the effect of a small flame which may result from fault conditions, in order to assess by a simulation technique the fire hazard. It is applicable to electrotechnical equipment, its sub-assemblies and components and to solid electrical insulating materials or other combustible materials. |
EN IEC 60695-11-5 EN IEC 60695-11-5 |
Fixed general purpose luminaires | General requirements and tests of luminaires for fixed general purpose luminaires |
EN IEC 60598-2-1 EN IEC 60598-2-1 |
Floating Roller Peel Test | Adhesives —_x000d_ Determination of peel_x000d_ resistance of adhesive_x000d_ bonds — Floating roller_x000d_ method |
EN 1464:2010 EN 1464:2010 |
Floodlights | General requirements and tests of luminaires for floodlights |
EN 60598-2-5 EN 60598-2-5 |
Forced convection gas-fired air heaters | Non-domestic forced convection gas-fired air heaters for space heating not exceeding a net heat input of 300 kW incorporating a fan to assist transportation of combustion air or combustion products |
EN 1020 EN 1020 |
Forced-convection ovens and/or grills | Domestic cooking appliances burning gas - Rational use of energy - Appliances having forced-convection ovens and/or grills |
EN 30-2-2 EN 30-2-2 |
Forced-convection ovens and/or grills | Domestic cooking appliances burning gas - Safety - Appliances having forced-convection ovens and/or grills |
EN 30-1-2 EN 30-1-2 |
Fracture test | Destructive tests on welds in metallic materials - Fracture test |
EN ISO 9017 EN ISO 9017 |
Fryers | Gas heated catering equipment - Specific requirements - Fryers |
EN 203-2-4 EN 203-2-4 |
Gas Fired Catering Equipment | Testing of gas heated catering equipment Part 1 |
SASO GSO EN 203-1 SASO GSO EN 203-1 |
Gas Fired Domestic Cookers | Testing construction and performance characteristics as well as the requirements and methods of test for the safety and marking of domestic cooking appliances, capable of using the combustible gases having one or more enclosed covered burners under a glass ceramic panel |
SASO GSO EN 30-1-3 SASO GSO EN 30-1-3 |
Gas Fired Domestic Cookers | Testing of domestic cooking appliances burning gas having one or more burners with an automatic burner control system |
SASO GSO EN 30-1-4 SASO GSO EN 30-1-4 |
Gas Fired Domestic Cookers | Testing construction and performance characteristics as well as the requirements and methods of test for the safety and marking of freestanding and built-in domestic cooking appliances burning the combustible gases |
SASO GSO EN 30-1-1 SASO GSO EN 30-1-1 |
Gas Fired Domestic Cookers | Requirements and the test method for the rational use of energy of gas burning domestic cooking appliances |
SASO GSO EN 30-2-1 SASO GSO EN 30-2-1 |
Gas Fired Domestic Cookers | Requirements and test method for the rational use of energy of gas cooking appliances having forced convection ovens and/or grills using combustible gases |
SASO GSO EN 30-2-2 SASO GSO EN 30-2-2 |
Gas Fired Domestic Cookers | Testing of appliances having forced-convection ovens and/or grills |
SASO GSO EN 30-1-2 SASO GSO EN 30-1-2 |
Gas heated catering equipment | Gas heated catering equipment - General safety rules |
EN 203-1 EN 203-1 |
Gas Heated Catering Equipment | Gas heated catering equipment - Part 3: Materials and parts in contact with food and other sanitary aspects |
EN 203-3 EN 203-3 |
Gas, oil and solid-fuel burning appliances having electrical connections | Safety of household and similar electrical appliances and particular requirements for gas, oil and solid-fuel burning appliances having electrical connections |
EN IEC 60335-2-102:2006 EN IEC 60335-2-102:2006 |
General requirements for basic safety and essential performance of medical electrical equipment | Medical electrical equipment |
EN 60601-1 EN 60601-1 |
Glow-wire apparatus and common test procedure | This part of IEC 60695 specifies the glow-wire apparatus and common test procedure to simulate the effects of thermal stresses which may be produced by heat sources such as glowing elements or overloaded resistors, for short periods, in order to assess the fire hazard by a simulation technique. |
EN 60695-2-10:2013 EN 60695-2-10:2013 |
Grills, toasters and similar portable cooking appliances | Safety of household and similar electrical appliances and particular requirements for grills, toasters and similar portable cooking appliances |
EN 60335-2-9 EN 60335-2-9 |
Ground recessed luminaires | General requirements and tests of luminaires for ground recessed luminaires |
EN 60598-2-13 EN 60598-2-13 |
Handlamps | General requirements and tests of luminaires for handlamps |
EN 60598-2-8 EN 60598-2-8 |
Hardness testing | Destructive tests on welds in metallic materials - Hardness test on arc welded joints |
EN ISO 9015-1 EN ISO 9015-1 |
Heaters | Single burner gas-fired overhead radiant tube heaters for non-domestic use - Safety_x000d_ - Gas-fired central heating boilers - Assembly comprising a boiler body and a forced draught burner |
EN 416-1 EN 416-1 EN 416-2 EN 416-2 |
Hobs | Methods for measuring performance of household electric cooking appliances |
EN 60350-2 EN 60350-2 |
Hot water heaters for beverage | Gas heated catering equipment - Specific requirements - Hot water heaters for beverage |
EN 203-2-6 EN 203-2-6 |
Household and similar electrical appliances | General requirements relating to household and similar electrical appliances |
EN-IEC 60335-1:2012 EN-IEC 60335-1:2012 |
Impact tests | Destructive tests on welds in metallic materials - Impact tests - Test specimen location, notch orientation and examination |
EN ISO 9016 EN ISO 9016 |
Independent hotplates | Specification for dedicated liquified petroleum gas appliances independed hotplates. Including those incorporating a grill for outdoor use |
EN 484 EN 484 |
Instantaneous water heaters | Safety of household and similar electrical appliances and particular requirements for instantaneous water heaters |
EN IEC 60335-2-35:2003 EN IEC 60335-2-35:2003 |
Kitchen machines | Safety of household and similar electrical appliances and particular requirements for kitchen machines |
EN IEC 60335-2-14 EN IEC 60335-2-14 |
Lamp Controlgear | Lamp controlgear - Part 1: General and safety requirements |
EN 61347-1 EN 61347-1 |
Lap Shear Test | Adhesives —_x000d_ Determination of_x000d_ tensile lap-shear_x000d_ strength of bonded_x000d_ assemblies |
EN 1465:2009 EN 1465:2009 |
Liquefied petroleum gas appliances | Specifications for dedicated liquefied petroleum gas appliances - Portable vapour pressure liquefied petroleum gas appliances |
EN 521 EN 521 |
Luminaires | General requirements and tests of luminaires |
EN 60598-1 EN 60598-1 |
Luminaires for road and street lighting | General requirements and tests of luminaires for road and street lighting |
EN IEC 60598-2-3 EN IEC 60598-2-3 |
Luminaires for use in clinical areas of hospitals and health care buildings | General requirements and tests of luminaires for use in clinical areas of hospitals and health care buildings |
EN 60598-2-25 EN 60598-2-25 |
Luminaires with limited surface temperatures | General requirements and tests of luminaires for luminaires with limited surface temperatures |
EN IEC 60598-2-24 EN IEC 60598-2-24 |
Lumineires with built-in transformers for flament lamps | General requirements and tests of luminaires for lumineires with built-in transformers for flament lamps |
EN IEC 60598-2-6 EN IEC 60598-2-6 |
Macroscopic and microscopic examination of welds | Destructive tests on welds in metallic materials - Macroscopic and microscopic examination of welds |
EN ISO 17639 EN ISO 17639 |
Measurement of low power consumption | Electrical and electronic household and office equipment - Measurement of low power consumption |
IEC 62301 IEC 62301 |
Measurement of low power consumption | Electrical and electronic household and office equipment - Measurement of low power consumption |
EN 50564 EN 50564 |
Measuring method of the energy consumption of gas fired ovens | Measuring method of the energy consumption of gas fired ovens |
EN 15181 EN 15181 |
Metal Chimney Lab. | Thermal performance, gas leakage and condensation, rain water resistance testing of metal chimneys falling under EN 1856-1/-2. |
EN 1859 EN 1859 |
Method for the determination of the proof and the comparative tracking indices of solid insulating materials | This international standard specifies the method of test for the determination of the prof and comparative tracking indices of solid insulating meterials on pieces taken from parts of equipment and on plaques of material using alternating voltages. |
EN IEC 60112 EN IEC 60112 |
MT-Magnetic particle testing | Non-destructive testing of welds - Magnetic particle testing |
EN ISO 17638 EN ISO 17638 |
Multi Purpose Boiling Burners For Outdoor Use | Specification for dedicated liquefied petroleum gas appliances- Multi purpose boiling burners for outdoor use |
EN 497 EN 497 |
Open burners and wok burners | Gas heated catering equipment - Specific requirements - Open burners and wok burners |
EN 203-2-1 EN 203-2-1 |
Outdoor barbecues | Safety of household and similar electrical appliances and particular requirements for outdoor barbecues |
EN IEC 60335-2-78:2003 EN IEC 60335-2-78:2003 |
Ovens | Gas heated catering equipment - Specific requirements - Ovens |
EN 203-2-2 EN 203-2-2 |
Pasta cookers | Gas heated catering equipment - Specific requirements - Pasta cookers |
EN 203-2-11 EN 203-2-11 |
Peel and chisel testing | Specimen dimensions and procedure for mechanized peel testing resistance spot, seam and embossed projection welds_x000d_ - Resistance welding - Testing of welds - Peel and chisel testing of resistance spot and projection welds |
EN ISO 10447 EN ISO 10447 EN ISO 14270 EN ISO 14270 |
Peel test (adhesively bonded reflective tape) | Peel, ageing, water immersion, salt spray tests and exposure resistances |
WSB-M11P56-A WSB-M11P56-A |
Portable general purpose luminaires | General requirements and tests of luminaires for portable general purpose luminaires |
EN 60598-2-4 EN 60598-2-4 |
Pressure Cookers | Domestic Use Pressure Cooker Safety Testing |
EN 12983-1 EN 12983-1 EN 12778 EN 12778 |
PT-Penetrant testing | Non-destructive testing - Penetrant testing |
EN ISO 3452-1 EN ISO 3452-1 |
Radiant Tube Heater | Multi burner gas fired overhead radiant tube heather systems for non domestic use- Part 2: System E- Safety |
EN 777-2 EN 777-2 |
Radiant Tube Heater | Multi- Burner gasfired radiant tube heater systems for non- Domestic use- Part 4: System H- Safety |
EN 777-4 EN 777-4 |
Radiant Tube Heater | Multi- Burner gas- Fired overhead radiant tube heater systems for non- Domestic use Part 1: System D- Safety |
EN 777-1 EN 777-1 |
Radiant Tube Heater | Multi- Burner- Gas- Fired overhead radiant tube heather systems for non- domestic use- Part 3: System F- Safety |
EN 777-3 EN 777-3 |
Range hoods and other cooking fume extractors | Safety of household and similar electrical appliances and particular requirements for range hoods and other cooking fume extractors |
EN IEC 60335-2-31:2003 EN IEC 60335-2-31:2003 |
Ranges, ovens, steam ovens and grills | Methods for measuring performance of household electric cooking appliances |
EN 60350-1 EN 60350-1 |
Recessed luminaires | General requirements and tests of luminaires for recessed luminaires |
EN IEC 60598-2-2 EN IEC 60598-2-2 |
Refrigerating Appliances, Ice-cream Appliances and Ice-makers | Safety of Household and similar electrical appliances -Part 2-24: Particular requirements for refrigerating appliances, ice-cream appliances and ice-makers |
EN 60335-2-24 EN 60335-2-24 |
Room heaters | Safety of household and similar electrical appliances and particular requirements for room heaters |
EN IEC 60335-2-30:2010 EN IEC 60335-2-30:2010 |
Rotating Electrical Machines | Rotating electrical machines -- Part 1: Rating and performance |
EN 60034-1 EN 60034-1 |
RT-Radiographic testing | Non-destructive testing of welds Radiographic testing_x000d_ X-ray techniques with film |
EN ISO 17636-1 EN ISO 17636-1 |
Salamanders and rotisseries | Gas heated catering equipment - Specific requirements - Salamanders and rotisseries |
EN 203-2-7 EN 203-2-7 |
Shavers, hair clippers and similar appliances | Safety of household and similar electrical appliances and particular requirements for shavers, hair clippers and similar |
EN 60335-2-8 EN 60335-2-8 |
Shear testing | Specimen dimensions and procedure for shear testing resistance spot, seam and embossed projection welds |
EN ISO 14273 EN ISO 14273 |
Solid tops, warming plates and griddles | Gas heated catering equipment - Specific requirements - Solid tops, warming plates and griddles |
EN 203-2-9 EN 203-2-9 |
Space Heaters | Specifications for dedicated liquefied petroleum gas appliances-Flueless non-Domestic space heaters not exeeding 10 kW |
EN 461 EN 461 |
Space Heaters | Specification for dedicated liquefied petroleum gas appliances - Domestic flueless space heaters (including diffusive catalytic combustion heaters) |
EN 449 EN 449 |
Stationary cooking ranges, hobs, ovens and similar appliances | Safety of household and similar electrical appliances and particular requirements for stationary cooking ranges, hobs, ovens and similar appliances |
EN 60335-2-6 EN 60335-2-6 |
Stop time measurement test | Calculation of the necessary safety distance between hazardous point and safety device |
EN ISO 13855 EN ISO 13855 |
Storage water heaters | Safety of household and similar electrical appliances and particular requirements for storage water heaters |
EN IEC 60335-2-21:2003 EN IEC 60335-2-21:2003 |
Structural adhesives | Structural adhesives - Testing of adhesively bonded joints - Bead peel test |
DIN 54457 DIN 54457 |
Tension testing | Specimen dimensions and procedure for cross tension testing resistance spot and embossed projection welds_x000d_ - Resistance welding - Destructive tests on welds in metallic materials - Torsion test of resistance spot welds |
EN ISO 14272 EN ISO 14272 EN ISO 17653 EN ISO 17653 |
Testing of Boilers | Gas-fired central heating boilers - Part 2-2: Specific standard for type B1 appliances |
EN 15502-2-2 EN 15502-2-2 |
Testing of Boilers | Gas-fired central heating boilers - Part 2-1: Specific standard for type C appliances and type B2, B3 and B5 appliances of a nominal heat input not exceeding 1 000 kW |
EN 15502-2-1 EN 15502-2-1 |
Testing of Boilers | Gas-fired heating boilers - Part 1: General requirements and tests |
EN 15502-1 EN 15502-1 |
Testing of Water Heaters | Gas-fired instantaneous water heaters for the production of domestic hot water |
EN 26 EN 26 |
Transverse tensile test | Destructive tests on welds in metallic materials - Transverse tensile test |
EN ISO 4136 EN ISO 4136 |
UT-Ultrasonic testing | Non-destructive testing of welds - Ultrasonic testing - Techniques, testing levels, and assessment |
EN ISO 17640 EN ISO 17640 |
Vacuum cleaners and water-Suction cleaning appliances | Safety of household and similar electrical appliances and particular requirements for vacuum cleaners and water-Suction cleaning appliances |
EN 60335-2-2 EN 60335-2-2 |
VT-Visual testing | Non-destructive testing of welds - Visual testing of fusion-welded joints |
EN ISO 17637 EN ISO 17637 |
Warming plates and similar appliances | Safety of household and similar electrical appliances and particular requirements for warming plates and similar appliances |
EN 60335-2-12 EN 60335-2-12 |
Construction and performance tests residual cookers fired by solid fuel. Construction and performance tests all exclude Quality of Materials; Quality of Welding; Pressure Testing of Boiler; Testing of Screw Threads; Quality of Vitreous Enamel Finish; Measurement of Thickness of Enamelled Components; Dress Guard Testing.
Accredited: Yes
Capability | Description | Standard |
---|---|---|
All central heating fittings and accessories | Testing of all types of fittings and accessories used in domestic central heating systems. _x000d_ Capable of performing capture capacity tests (for all types of system filters), high pressure tests, pressure drop tests and life cycle simulations for all components. Kiwa Gastec (UK) have developed unique experiment rigs for each of these specific tests. _x000d_ No universal standards exist for these tests and so Kiwa follow an in-house test standard that we have developed ourselves. |
Documented In-House Method |
Central heating water additives | Testing of central heating additives which circulate within the central heating water. Test of additives which work against corrosion, scale, oxide sludge can be conducted. We are also capable of testing additives which seal central heating leaks whilst they circulate within the water. Kiwa Gastec (UK) have designed and built a unique rig for running experiments specific to the testing of these additives. |
Documented In-House Method |
Combustion performance tests in gravity-feed central heating boiler | Combustion performance tests in gravity-feed central heating boilers, testing the use of naturally occurring smokeless solid fuels. |
Fuel testing procedure No 20.1 Fuel testing procedure No 20 |
Combustion performance tests in inset open fires | Combustion performance tests in inset open fires. Used to test bituminous coal fuels. |
Fuel testing procedure No 19 |
Combustion performance tests in inset room heater | Combustion performance tests in inset room heaters, testing naturally occurring smokeless solid fuels. |
Fuel testing procedure No 15.1 |
Combustion performance tests in: gravity feed central heating boiler, inset room heaters and inset open fires | Combustion performance tests in: gravity feed central heating boiler, inset room heaters and inset open fires. Testing manufactured solid smokeless fuels. |
Fuel testing procedure No 15.1 Fuel testing procedure No 19.1 Fuel testing procedure No 20 Fuel testing procedure No 20.1 Fuel testing procedure No 19 |
Construction and performance tests on residential space heating appliances fired by wood pellets | Construction tests on residential space heating appliances fired by wood pellets. Construction and performance tests all exclude Quality of Materials; Quality of Welding; Pressure Testing of Boiler; Testing of Screw Threads; Quality of Vitreous Enamel Finish; Measurement of Thickness of Enamelled Components; Dress Guard Testing. |
BS EN 14785:2006 |
Decorative fuel effects gas appliances | Construction and performance tests on decorative fuel effects gas appliances. Construction and performance tests all exclude Quality of Materials; Quality of Welding; Pressure Testing of Boiler; Testing of Screw Threads; Quality of Vitreous Enamel Finish; Measurement of Thickness of Enamelled Components; Dress Guard Testing. |
BS EN 509:2000 |
Dedicated liquefied petroleum gas appliances - barbecues for outdoor use contact grills included | Construction and performance tests on dedicated liquefied petroleum gas appliances - barbecues for outdoor use contact grills included. Construction and performance tests all exclude Quality of Materials; Quality of Welding; Pressure Testing of Boiler; Testing of Screw Threads; Quality of Vitreous Enamel Finish; Measurement of Thickness of Enamelled Components; Dress Guard Testing. |
BS EN 498:2000 |
Domestic hot water heating combination boilers with forced draught atomising oil burners of nominal heat input not exceeding 70kW | Construction and performance tests on domestic hot water heating combination boilers with forced draught atomising oil burners of nominal heat input not exceeding 70kW. Construction and performance tests all exclude Quality of Materials; Quality of Welding; Pressure Testing of Boiler; Testing of Screw Threads; Quality of Vitreous Enamel Finish; Measurement of Thickness of Enamelled Components; Dress Guard Testing. |
BS EN 303-6:2000 |
Firelighters: Ignition performance test | Ignition performance testing of firelighters. |
Fuel testing procedure No 21 |
Gas fired storage water heaters for the production of domestic hot water | Efficiency testing |
BS EN 89:2000 |
Gas-fired central heating - type C boilers of nominal heat input not exceeding 70 kW | Efficiency testing |
BS EN 483:1999+A4:2007 |
Gas-fired central heating boilers - assembly comprising a boiler body and a forced draught burner | Efficiency tests |
BS EN 303-3:1999 |
Gas-fired domestic appliances producing hot water. Assessment of energy consumption and/or effciency | Testing of gas-fired heaters, water heaters, hot-water supply systems, domestic, hot-water boilers, instantaneous water heaters, storage water heaters, gas-powered devices for performance and energy consumption, involving mathematical calculations regarding testing conditions and performance testing. These tests help to create an assessment of the hot water appliances and calculate their energy consumption and efficiencies. |
EN 13203-2 |
Gas-fired heating boilers - type B11 and B11BS boilers fitted with atmospheric burners for nominal heat input not exceeding 70kW | Efficiency tests |
BS EN 297:1994 |
Gravimetric and optical measurement of smoke emission | Gravimetric and optical measurement of smoke emission tests run on smoke reducing solid fuel burning domestic appliances |
PD 6434:1969 Solid fuel appliance testing procedure No 12.1 |
Gravimetric measurement of smoke emission in all types of solid fuels | Gravimetric measurement of smoke emission in all types of solid fuels |
Fuel testing procedure No 18 |
Heating Boilers for solid fuels, manually and automatically stoked, nominal heat output of up to 300kW | EN BS 303-5:2012 (excluding claused 4.2.2, 4.2.3, 4.3.9.2, 5.4 and 5.5) |
BS EN 303-5:2012 |
Heating boilers with atomising oil burners | Construction and performance tests on heating boilers with atomising oil burners. Construction and performance tests all exclude Quality of Materials; Quality of Welding; Pressure Testing of Boiler; Testing of Screw Threads; Quality of Vitreous Enamel Finish; Measurement of Thickness of Enamelled Components; Dress Guard Testing. |
BS EN 304:1992 |
Heating boilers with forced draught atomising oil burners | Construction and performance tests on heating boilers with forced draught atomising oil burners. Construction and performance tests all exclude Quality of Materials; Quality of Welding; Pressure Testing of Boiler; Testing of Screw Threads; Quality of Vitreous Enamel Finish; Measurement of Thickness of Enamelled Components; Dress Guard Testing. |
BS EN 303-2:1999 |
Heating boilers with forced draught burners | Construction and performance tests on heating boilers with forced draught burners. Construction and performance tests all exclude Quality of Materials; Quality of Welding; Pressure Testing of Boiler; Testing of Screw Threads; Quality of Vitreous Enamel Finish; Measurement of Thickness of Enamelled Components; Dress Guard Testing. |
EN 303-1:1999 |
Heating boilers with forced draught burners with outputs up to 70kW and a maximum operating pressure of 3 bar | Construction and performance tests on heating boilers with forced draught burners with outputs up to 70kW and a maximum operating pressure of 3 bar. Construction and performance tests all exclude Quality of Materials; Quality of Welding; Pressure Testing of Boiler; Testing of Screw Threads; Quality of Vitreous Enamel Finish; Measurement of Thickness of Enamelled Components; Dress Guard Testing. |
EN 303-4:1999 |
Hydrocarbons emissions testing | Residential solid fuel burning appliances |
CEN/TS 15883: 2009 |
Independent gas fired convection heaters | Construction and performance testing on independent gas fired convection heaters. Construction and performance tests all exclude Quality of Materials; Quality of Welding; Pressure Testing of Boiler; Testing of Screw Threads; Quality of Vitreous Enamel Finish; Measurement of Thickness of Enamelled Components; Dress Guard Testing. |
BS EN 613:2001 |
Independent gas fired flueless space heaters for nominal heat input not exceeding 6kW | construction and performance tests on i0ndependent gas fired flueless space heaters for nominal heat input not exceeding 6kW. Construction and performance tests all exclude Quality of Materials; Quality of Welding; Pressure Testing of Boiler; Testing of Screw Threads; Quality of Vitreous Enamel Finish; Measurement of Thickness of Enamelled Components; Dress Guard Testing. |
BS EN 14829:2007 |
Inset appliances including open fire fired by solid fuels | Construction and performance tests on inset appliances including open fire fired by solid fuels. Construction and performance tests all exclude Quality of Materials; Quality of Welding; Pressure Testing of Boiler; Testing of Screw Threads; Quality of Vitreous Enamel Finish; Measurement of Thickness of Enamelled Components; Dress Guard Testing. |
BS EN 13229:2001 +A2:2004 |
Magnetic and non-magnetic central heating filters | Testing of filters which remove magnetic and non-magnetic particles that circulate in domestic central heating systems. _x000d_ Capable of performing capture capacity tests, high pressure tests, pressure drop tests and life cycle simulations. Kiwa Gastec (UK) have developed unique experiment rigs for each of these specific tests. _x000d_ No universal standards exist for these tests and so Kiwa follow an in-house test standard that we have developed ourselves. |
Documented In-House Method |
Non-domestic forced convection gas-fired air heaters for space heating not exceeding a net heat input of 300kW, incorporating a fan to assist transportation of combustion air or combustion products | Efficiency testing |
EN 1020:2009 |
NOx emissions testing | Residential solid fuel burning appliances |
CEN/TS 15883: 2009 |
Oil fired cookers with or without boilers with heat outputs up to 45 kW | Construction and performance tests on oil fired cookers with or without boilers with heat outputs up to 45 kW. Construction and performance tests all exclude Quality of Materials; Quality of Welding; Pressure Testing of Boiler; Testing of Screw Threads; Quality of Vitreous Enamel Finish; Measurement of Thickness of Enamelled Components; Dress Guard Testing. |
OFTEC Oil Fired Appliance Standard OFS-A101:2005 |
Oil -fired forced convection air heaters - stationary and transportable for space heating. | Efficiency measurement (by losses method) on oil -fired forced convection air heaters - stationary and transportable for space heating. |
BS EN 13842:2004 |
Oil fired heating boilers with atomising burners with outputs up to 70kW | Construction and performance tests on oil fired heating boilers with atomising burners with outputs up to 70kW. Construction and performance tests all exclude Quality of Materials; Quality of Welding; Pressure Testing of Boiler; Testing of Screw Threads; Quality of Vitreous Enamel Finish; Measurement of Thickness of Enamelled Components; Dress Guard Testing. |
OFTEC Oil fired appliance standard OFS-A100:2004 |
Particulates emissions | Residential solid fuel burning appliances |
CEN/TS 15883: 2009 |
Residual cookers fired by solid fuel | Construction and performance tests residual cookers fired by solid fuel. Construction and performance tests all exclude Quality of Materials; Quality of Welding; Pressure Testing of Boiler; Testing of Screw Threads; Quality of Vitreous Enamel Finish; Measurement of Thickness of Enamelled Components; Dress Guard Testing. |
BS EN 12815:2001 +A1:2004 |
Residual independent boilers fired by solid fuel - nominal heat output up to 50 kW. | Construction and performance tests on residual independent boilers fired by solid fuel - nominal heat output up to 50 kW. Construction and performance tests all exclude Quality of Materials; Quality of Welding; Pressure Testing of Boiler; Testing of Screw Threads; Quality of Vitreous Enamel Finish; Measurement of Thickness of Enamelled Components; Dress Guard Testing. |
BS EN 12809:2001 + A1:2004 |
Roomheaters fired by solid fuel | Construction and performance tests on roomheaters fired by solid fuel. Construction and performance tests all exclude all exclude Quality of Materials; Quality of Welding; Pressure Testing of Boiler; Testing of Screw Threads; Quality of Vitreous Enamel Finish; Measurement of Thickness of Enamelled Components; Dress Guard Testing. |
BS EN 13240:2001 +A2:2004 |
Slow heat release appliances fired by solid fuel | Construction and performance testing on slow heat release appliances fired by solid fuel. Construction and performance tests all exclude Quality of Materials; Quality of Welding; Pressure Testing of Boiler; Testing of Screw Threads; Quality of Vitreous Enamel Finish; Measurement of Thickness of Enamelled Components; Dress Guard Testing. |
BS EN 15250:2007 |
Steam, hot water and high temperature heat transfer fluid boilers | Thermal performance tests. Includes_x000d_ thermal performance of biomass boilers using indirect (losses) method (incorporating Amendment 1) |
BS 845-1:1987 |
Resistance to fragmentation by the Los Angeles Method
Accredited: Yes
Capability | Description | Standard |
---|---|---|
Aggregate Testing | Particle size distribution - sieving method |
BS EN 933-1:2012 |
Aggregate Testing | Resistance to fragmentation by the Los Angeles Method |
EN 1097-2:2010 |
Aggregate Testing | Water Soluble Sulphate |
EN1744:2012 |
Aggregate Testing | Acid Soluble Sulphide |
EN1744:2012 |
Aggregate Testing | Water soluble chloride |
BS EN1744:2012 |
Aggregate Testing | Total Sulphur |
EN1744:2012 |
Aggregate Testing | Acid-soluble materials content |
BS 812:Part 119:1985 Acid-soluble Materials Content |
Bituminous Mixtures for roads and other paved areas | Maximum Density -procedure B |
BS EN 12697-5:2009 |
Bituminous Mixtures for roads and other paved areas | Bulk Density - sealed specimen |
BS EN 12697-6:2012 |
Bituminous Mixtures for roads and other paved areas | Air Voids Content |
BS EN 12697-8:2003 |
Cast Stone | Capillary absorption |
Documented In-House Method C6:January 2000 based on UKSA Specification for Cast Stone CI/SIB, F13:Ma |
Cast Stone | Capillary absorption |
BS 1217:2005 |
Concrete Testing - Hardened | Sampling for analysis of chlorides - Site |
Documented In-House Method ISM ST2a:1992 |
Concrete Testing - Hardened | Carbonation - Site |
BRE Information Paper IP 6/81 |
Concrete Testing - Hardened | Resistivity - Site |
Documented In-House Method ISM ST3:1992 |
Concrete Testing - Hardened | Chloride content |
BS 1881:Part 124:2015 |
Concrete Testing - Hardened | Compressive Strength of cubes - including curing |
BS EN 12390-1:2012 BS EN 12390-3:2009 BS EN 12390-2:2009 |
Concrete Testing - Hardened | Cored specimens - examining and testing in compression |
BS EN 12504-1:2009 |
Concrete Testing - Hardened | Cement & Aggregate Content |
BS 1881:Part 124:2015 |
Concrete Testing - Hardened | Density |
BS EN 12390-7:2009 |
Concrete Testing - Hardened | Coring - Site |
BS 1881:Part 120:1983 |
Concrete Testing - Hardened | Sulphate content |
BS 1881:Part 124:2015 |
Concrete Testing - Hardened | Sodium oxide & potassium oxide contents |
BS 1881:Part 124:2015 |
Concrete Testing - Hardened | Sulphur as sulphide content |
BS 1881:Part 124:2015 |
Concrete Testing - Hardened | Type of aggregate |
BS 1881:Part 124:2015 |
Concrete Testing - Hardened | Presence of High Alumina Cement |
BRE IS 15/74 |
Concrete Testing - Reinforced | Location of reinforcement - Site |
BS 1881:Part 204:1988 |
Concrete Testing - Reinforced | Corrosion potentials of uncoated reinforcing steel in concrete - Site |
ASTM C 876-09 |
Equivalent CBR% using Plate Bearing Test | Determination of Equivalent CBR using Plate Bearing Test - Site |
DEsign Manual for Roads and Bridges. Volume 7 : Pavement Design and Maintenance. HD 25/94:Foundation |
Geotechnical Investigation and Laboratory Testing of Soil | Water content |
BS EN ISO 17892-1:2014 |
Mortar Testing | Chloride content |
BS 4551:2005 + A2:2013 |
Mortar Testing | Insoluble residue and soluble silica content |
BS 4551:2005 + A2:2013 |
Mortar Testing | Calcium oxide content |
BS 4551:2005 + A2:2013 |
Mortar Testing | Sulphur trioxide content |
BS 4551:2005 + A2:2013 |
Mortars, Screeds and Plasters (Testing) | Rebar continuity - Site |
Documentd In-House Method ISM ST2a:1992 |
Mortars, Screeds and Plasters (Testing) | Calcium oxide content |
BS 4551:Part 2:1998 |
Mortars, Screeds and Plasters (Testing) | Insoluble residue and soluble silica content |
BS 4551:Part 2:1998 |
Mortars, Screeds and Plasters (Testing) | Sulphur trioxide content |
BS 4551:Part 2:1998 |
Mortars, Screeds and Plasters (Testing) | Chloride content |
BS 4551:Part 2:1998 |
Particle Size Distribution (Wet Sieving) | Particle size distribution - dry sieving |
BS 1377:Part 2:1990 |
Road Signs and Lighting Columns | Relative Loss of Section |
Documented In-House Method ST 9:2008 based on The Institution of Lighting Engineers Technical Report |
Salt for spreading on highways for winter maintenance (Testing) | Rapid determination of Sulphate content |
BS 3247:2011 |
Salt for spreading on highways for winter maintenance (Testing) | Matter insoluble in water |
BS 3247:2011 |
Salt for spreading on highways for winter maintenance (Testing) | Chloride content |
BS 3247:2011 |
Salt for spreading on highways for winter maintenance (Testing) | General determination of Sulphate content |
BS 3247:2011 |
Salt for spreading on highways for winter maintenance (Testing) | Grading |
BS 3247:2011 |
Salt for spreading on highways for winter maintenance (Testing) | Moisture content |
BS 3247:2011 |
Soils Testing for civil engineering purposes | Dry density/moisture content relationship (4.5kg rammer) |
BS 1377:Part 4:1990 |
Soils Testing for civil engineering purposes | Dry density/moisture content relationship (vibrating hammer) |
BS 1377:Part 4:1990 |
Soils Testing for civil engineering purposes | Moisture condition value (MCV) |
BS 1377:Part 4:1990 |
Soils Testing for civil engineering purposes | California Bearing Ratio (CBR) |
BS 1377:Part 4:1990 |
Soils Testing for civil engineering purposes | In-situ density - sand replacement method (large pouring cylinder) - Site |
BS 1377: Part 9:1990 |
Soils Testing for civil engineering purposes | Liquid limit - cone penetrometer |
BS 1377:Part 2:1990 |
Soils Testing for civil engineering purposes | Sulphate content of soil and ground water - gravimetric method |
BS 1377:Part 3:1990 |
Soils Testing for civil engineering purposes | Dry density/moisture content relationship (2.5 kg rammer) |
BS 1377:Part 4:1990 |
Soils Testing for civil engineering purposes | Vertical deformation & strength characteristic of soil by Plate Loading Test - Site |
BS 1377: Part 9:1990 |
Soils Testing for civil engineering purposes | Moisture content - oven drying method |
BS1377:Part 2:1990 |
Soils Testing for civil engineering purposes | Liquid limit - cone penetrometer - one point |
BS 1377:Part 2:1990 |
Soils Testing for civil engineering purposes | Organic matter content |
BS 1377:Part 3:1990 |
Soils Testing for civil engineering purposes | pH value |
BS 1377:Part 3:1990 |
Soils Testing for civil engineering purposes | In-situ density - core cutter method - Site |
BS 1377: Part 9:1990 |
Soils Testing for civil engineering purposes | In-situ California Bearing Ratio - Site |
BS 1377: Part 9:1990 |
Soils Testing for civil engineering purposes | Plastic limit |
BS 1377:Part 2:1990 |
Soils Testing for civil engineering purposes | Plasticity index and liquidity index |
BS 1377:Part 2:1990 |
Soils Testing for civil engineering purposes | Particle size distribution - wet sieving |
BS 1377:Part 2:1990 |