DE - English

Choose your language

Choose your country

Services

Markets

News and media

Testing

When you bring something new onto the market, you want to eliminate quality and safety risks. After all, your potential customers or clients need to be able to trust your product, component, (raw) material or its application. In other words, they'll have to be confident that it reliably performs the way it is supposed to, compliant with local and international rules and regulations. Kiwa's independent, fully equipped and highly qualified testing labs and services bring that trust.

Filters
Service
Market
Services (49 results)
Precast concrete complete package

Kiwa performs multiple certifications for concrete, reinforcing steel, and the precast component as a composite material, offering a complete package for precast concrete components.

Read more
Chloride analysis

In addition to contact with chloride-containing de-icing agents (de-icing salts), enrichment through direct contact with chemical substances or combustion residues from plastics in the event of a fire are frequent causes of chloride-induced corrosion of the reinforcement.

Read more
Testing of concrete with increased acid resistance in the MPA performance test

The “MPA-Performance-Test” is a procedure for testing increased resistance of mineral systems to chemical attack (especially to acid).

Read more
Wind-uplift test
Wind-uplift test of roof constructions

Wind-uplift test

Read more
Automotive Testing Service

Kiwa Primara offers tests in the automotive sector. Li-ion batteries, on-board chargers, DC/DC converters, wall boxes and car charging stations can be tested.

Read more
Comprehensive Battery Testing for International Standards

Kiwa Primara is your trusted partner for comprehensive battery testing services. We specialize in testing lithium-ion batteries to meet international standards like IEC, EN, UN, and RTCA. Our accredited lab ensures strict compliance with performance, safety, and quality criteria. Stay compliant and ensure the safety and reliability of your battery products.

Read more
Road and Highway Tests

Kiwa has testing systems, to check all characteristics that may apply to the design, construction and management of roads, industrial sites and dike revetments. The tests focus on capturing of pavement surface data, recording of the structural condition, loads exerted on the construction and environmental aspects.

Read more
Performance test of battery cells in cycles

Kiwa Primara tests battery cells for their performance in cycles - this is one of our core elements in a test. In a battery cycling test, a battery charges as well as discharged. Kiwa Primara tests your batteries according to your wishes and needs.

Read more
Transferred charge test according to DIN EN IEC 60079-0:2019-09

Test your explosion endangered products. Kiwa Primara performs “Transferred charge test” according to DIN EN IEC 60079-0:2019-09 Clause 26.17 (IEC 60079-0:2017) and DIN EN ISO 80079-36:2016-12 Annex D (ISO 80079-36:2016).

Read more
"MIC-Performance-Test" Test procedure with microbially induced sulphuric acid corrosion

The "MIC-Performance-Test" on a pilot plant scale for assessing the resistance of building products under real and particularly critical conditions in wastewater engineering plants (biogenic sulphuric acid corrosion, BSK)

Read more
Battery testing according to UN 38.3

Batteries containing lithium must be tested in accordance with UN 38.3 to ensure safe transport.

Read more
Kiwa Thermostatic Mixing Valve Certification (TMV type 2 and 3)

Kiwa Watertec | TMV thermostatic mixing valves testing and certification

Read more
Test of joint sealants for road construction

Kiwa carries out all tests of the DIN EN 14188 series of standards, e.g. the tests according to DIN EN 13880, parts 1-13. This is a test of hot-applied and cold-applied joint sealants as well as joint profiles for road construction, airports and other traffic surfaces.

Read more
Testing of Fasteners and fixings

We are specialized in testing of anchors in concrete and masonry. Your partner to get trusted results on fasteners.

Read more
Environmental simulations according to military standards

MIL-STD-810 is a U.S. military technical standard that specifies environmental test conditions for military equipment.

Read more
Skid resistance measurements SKM method

The SKM process focuses not only on the quality of the road, but also on road safety. The measurement provides important values for the condition assessment and evaluation of new or existing road surfaces.

Read more
Information security
Control and Indicating Equipment (CIE) – Fire detection and fire alarm system (EN 54-2)

The EN 54-2 is applicable for Control and Indicating Equipment (CIE) used in a fire detection and fire alarm system. A fire detection and fire alarm system that communicate for the purpose of detecting fire at the earliest practicable moment.

Read more
EMC Testing

EMC is emission of RF-waves from electr(on)ic appliances, which can cause interference in nearby receiving equipment. It is also the susceptibility to EMC phenomena, such as induced RF-energy, ESD, Surges, EFT and so on. Kiwa has thorough expertise...

Read more
Building inspection
Testing of curtain walls, cladding and structural sealant glazing

Tests at Kiwa simulate the real conditions on a construction site and use all materials to be tested, such as frames, glass, sealing materials, gaskets and anchoring devices. Thermal transmittance DIN EN 12412-2. Sound measurement according to DIN EN 20140.

Read more
Wooden beam ceiling: Measurement of impact sound reduction on lightweight construction ceilings according to ISO 10140-3

With the help of a wooden beam ceiling test stand, the lightweight construction ceiling is available in the test laboratory. With this test stand, the sound experts can test the insulation of the impact sound according to DIN EN ISO 10140-3.

Read more
Non-destructive testing

Not every structural analysis requires interventions in the building fabric. Various non-destructive or low-destructive test methods are available, especially for an initial assessment of the existing damage potential or to confirm the correct construction.

Read more
Renewable energy

Production of energy from renewable and decentralized energy is booming worldwide – the photovoltaic market has annual growth rates of around 20%. In order to remain successfully on the market, the safety, quality, durability and reliability of your products are essential.

Read more
Geotechnical Testing

Our geotechnical services are used by construction and civil engineers, highways and local authorities. We offer a wide range of site investigation and laboratory testing services.

Read more
Testing of flat glass, profiled glass and glass block products

Kiwa is a notified body and accredited testing laboratory for insulation glass (EN 1279); safety glass (EN 12150, EN 1863, EN 14179, EN 14449); coated glass (EN 1096). Kiwa performs the EN 12600 pendulum test for the classification of flat glass, as well as additional test on the frame of a window.

Read more