Process industry

Paint systems certified to the requirements of BRL-K21012 are suitable for the external protection of above ground steel tanksTanks protected with these coatings can be installed in all areas with a corrosion category from C2 to C5-I/M as defined in ISO 12944-2.

Pressure equipment with a pressure higher than 0,5 bar excluding: distribution networks, aerosols, machines covered by the Machine Directive, equipment for nuclear use, wellhead for controlling equipment, blast furnace(s), bottles or cans for carb...

Self-regulatory Safety Check. Objects of Declaration of Conformity are classified of 3 groups with hazardous machines, protective devices and personal protective equipment.

“S Mark” is voluntary safety certification system operated by KOSHA. KOSHA issues a “S Mark” certificate in case the safety and reliability of the product have been verified.

Hazard Analysis and Critical Control Points (HACCP) certification with Kiwa: improve your food safety performance, meet consumer demands & increase your profit.

Glass fiber reinforced plastic (FRP) tanks are widely used for the storage of chemicals. The tanks are designed for a maximum pressure of 0.5 bar and temperatures of - 40 to + 120 °C. The BRL-K21011 requirements are based on the requirements of NEN-EN 13121-1 to -4

Internal coatings of steel tanks in accordance with the requirements of BRL-K779 are suitable for the storage of fuels according to the PGS-Class 1, Class 2 or Class 3 with a storage temperature between -20C to + 40C. In addition to the pure mineral fuels these coatings are also

Sedex Members Ethical Trade Audit (SMETA) by Kiwa: meet buyers’ demands, show your ethical credentials and access new business.

Coatings certified to the requirements of BRL-K768 are suitable for the external protection of underground steel tanks, pipes and fittings. Tanks protected with these coatings can be installed in areas with a high ground water table. Also, tthese coatings can be used in combination with a cathodic protection system.

During the operational stage of pressure equipment it can occur that a pressure device requires modifications. In that case, the user needs to take necessary measures regarding the modifications to the pressure equipment.

Valves are being used in many applications for the control or actuation of pressure and volume flow of liquids and gases. Depending on the specific service conditions in terms of high or low pressure, temperature range and type of media, valves are constructed using the most suitable materials.

PE/GRP sumps for underground fuel storage tanks, manifold chambers and dispenser sumps (BRL-K21006-02)

Periodical Control Services with Kiwa: Ensure safe working conditions by ensuring compliance with Occupational Health and Safety laws.

Pressure equipment with a pressure higher than 0,5 bar excluding: distribution networks, aerosols, machines covered by the Machine Directive, equipment for nuclear use, wellhead for controlling equipment, blast furnace(s), bottles or cans for carb...

Especially in construction sector sustainability efforts are increasing. This requires companies to identify and declare the environmental impact of their products. The Environmental Product Declaration is used as an effective tool for this purpose.

ISO 22716 Cosmetics - Good Manufacturing Practices with Kiwa: Regulations for systematic and organisational product safety and quality control to be followed throughout the manufacture of cosmetics

Pressure Equipment Directive Quality certification with Kiwa: prove the safety and conformity of your pressure equipment, be ready for ISO 9001 and be competitive in the European market.

Rotational moulded PE tanks, with or without spill containers, for above ground chemical storage (BRL-K21008-02)

Stationary, atmospheric, welded, single or double walled thermoplastic tanks are widely used for the above ground storage of chemicals. The BRL-K21009 requirements are based on the requirements of the DVS 2205-1 to DVS 2205-5 standards. The BRL-K21009 also stipulates the requirements for the spill containers.

FSSC 22000 Food Safety System Certification with Kiwa: improve your food manufacturing safety, meet customer demands and increase your profit.