Services

  • KIWAGREEN for products improving the health of people and planet - K15014

    The KIWAGREEN certificate supports the demand and the supply of products and services which cause less stress on the environment.
    Show

  • Certification SSF 1014 and SSF114 security equipment

    Manufacturers who want to introduce security equipment on the Swedish market must ensure that their products have been tested according to the Swedish standard SSF 1014 and certified by the Swedish certification authority Svensk Brand- och SäkerhetsCertifiering (SBSC). Kiwa is a designated test lab for SSF 1014.
    Show

  • CE Testing and Certification

    Most energy using products have to comply with European regulations and directives like Low Voltage Directive (LVD), Electromagnetic Compatibility Directive (EMC-D), Machinery Directive, GAS Appliance Regulation (GAR), Construction Products Regulation (CPR), Pressure Equipment Directive (PED) and ATEX.
    Show

  • Electric and electronic products and components testing and certification

    Kiwa is a Notified Body for the LVD and EMC directive. Kiwa is also a partner of VDE institute and offers the following services for electrical products: CE testing, Kiwa certification, IECEE CB certification scheme, VDE certification, GS certification, Certification for North America and Canada, CSS.
    Show

  • Electrical Equipment and Appliances

    Kiwa has been - amongst others - a Notified Body for the Low Voltage Directive and E.M.C. Directive for many years. Curently Kiwa is also a NCB, with several CBTL’s.
    Show

  • Gas Appliance Testing

    Kiwa Gastec | Gas Appliance Testing
    Show

  • Testing and certification according to the BED

    We provide testing and certification according to the Boiler Efficiency Directive (BED) 92/42/EEC and/or the Commission Regulation (EU) No 813/2013. Through the years we seen many different gas-fired appliances, among these are barbecue’s, patio heaters and central heating boilers, just to mention a few.
    Show

  • Ductile cast iron pipes and fittings for the transport of drinking water (BRL-K772)

    The products are intended to be used as a piping system for the transport of drinking water and/or wastewater, with a nominal diameter of DN 40 up to and including DN 2000 and nominal pressures of PN 10, PN 16, PN 25 or PN 40.
    Show

  • Fire hydrants (BRL-K614)

    The fire hydrants are intended for drinking water installations with a working pressure of maximum 1.000 kPa and a maximum water temperature of 25°C.
    Show

  • Repair clamps (BRL-K777)

    The products are intended to be used in piping systems with a maximum water pressure of 1,0 MPa, a water temperature of not more than 30°C and a nominal diameter greater than or equal to 15 mm and less than or equal to 400 mm. The products are int...
    Show

  • Float operated valves for flushing cisterns (BRL-K615)

    The float operated valves are intended to be applied in flushing cisterns which are connected to WC-pans. They have the purpose to open when the cistern is being flushed and shut off the water supply when the required water level is reached.The fl...
    Show

  • Stop-and connecting cocks (BRL-K604)

    This evaluation guideline applies to: stop cocks with disc, with a nominal diameter up to DN 100, other stop cocks with a nominal diameter up to DN50, connecting cocks with a nominal diameter up to DN 15. Stop- and connecting cocks are des...
    Show

  • Shower heads and hand showers for sanitary tapware (BRL-K658)

    The shower heads and hand showers may be used in tap water installations with a maximum working pressure of 1000 kPa. The recommended limits for correct operation are a dynamic pressure between 100 kPa and 500 kPa and a water temperature of maximu...
    Show

  • VCA and VCU

    VCA and VCU health, safety and environment certification with Kiwa: create safe working conditions for contractors and reduce accidents.
    Show

  • Sanitary tapware: frost resistant outdoor taps with wall passage (BRL-K14001)

    Frost resistant outdoor taps with wall passage that have the Kiwa Water Mark meet all functional and legal hygienic requirements specified in the “Materials and chemicals in the supply of drinking water and warm tap water Regulation” of the Dutch government.
    Show

  • Backflow protection devices Family A, type A,B,C,D,F (BRL-K14030)

    Backflow-protection-devices
    Show

  • Gaskeur

    In the European CE marking basic requirements for safety and rational use of energy are covered. The Dutch Gaskeur decides on important additional properties. With the voluntary certification brand Gaskeur, the industry shows that it is willing to go beyond legal requirements.
    Show

  • Sedex Members Ethical Trade Audit (SMETA)

    Sedex Members Ethical Trade Audit (SMETA) by Kiwa: meet buyers’ demands, show your ethical credentials and access new business.
    Show

  • Global Certification

    With many years of experience, Kiwa offers smooth and quick testing and global certification services. Having labs in many countries we work on offering our services locally. Kiwa has fully equipped and accredited test facilities to support your certification desires for the global market.
    Show

  • International Approval Services

    Kiwa is able to provide worldwide support and help you with all your needs and requirements for the international approval of wireless communication, electrical- and gas-products.
    Show