Services

  • Fuel cells are sensible for contaminants like SMOG, salt, soot and other (air) pollutants in environmental air. Whether fuel cells are implemented in cars, (motor) bikes or other (transport) vehicles, it is necessary to investigate the influence of potentially harmful contaminants from the air on the fuel cells.
    Show
  • Kiwa has combined know-how and experience of investigating adhesives for a wide range of applications. Our adhesives testing expertise helps to prove and improve the performance and quality of adhesive products.
    Show
  • The National Organic Program NOP is part of the US Department of Agriculture (USDA). BCS is accredited in 2002. Certification under NOP regulations entitles a company to use the USDA NOP seal in accordance with the requirements of the Regulation.
    Show
  • Kiwa can test according to the TA Standard for safety flat-plate photovoltaic modules and panels (Solar). Testing and certification according to the UL1703 allows launching your products on the North American market. These requirements cover flat-...
    Show
  • The resistance against permeation of gases and water through pipe walls and other separation components such as films, is for many practical applications a very important property. In this area, Kiwa Technology has gained vast knowledge and experience.
    Show
  • The products are intended to be used in piping systems with a maximum water pressure of 1,0 MPa, a water temperature of not more than 30°C and a nominal diameter greater than or equal to 15 mm and less than or equal to 400 mm. The products are int...
    Show
  • Kiwa | Global RF type approval service
    Show
  • SCC-SCP-Safety-Certificate-Contractor-Safety-Certificate-Personnel-Services
    Show
  • Activities for Australia and New Zealand-vKiwa and SAI Global have built up for many years an extensive co-operation in the field of sanitary products. Our laboratory is recognized by SAI Global, Global Mark, IAPMO Oceana and AGA for conducting tests according to Australian Standards.
    Show
  • The shower heads and hand showers may be used in tap water installations with a maximum working pressure of 1000 kPa. The recommended limits for correct operation are a dynamic pressure between 100 kPa and 500 kPa and a water temperature of maximu...
    Show
  • Kiwa Gastec | Testing for Biomass Fuels and Appliances
    Show
  • Kiwa Gastec | Gas, solid fuel and oil boiler testing
    Show
  • Kiwa Gastec | Test rig calibration
    Show
  • The products are intended to be used as part of sanitary tapware as meant in the Kiwa evaluation guideline BRL-K607, for which a separate Kiwa product certificate has been issued.
    Show
  • Kiwa tests and certifies products used in industrial and domestic (drinking) water installations. Products that conform with the requirements are marked with the Kiwa mark. The Kiwa mark indicates that: The products meet the requirements in rel...
    Show
  • Kiwa Gastec | Proving the safety of your product
    Show
  • Innovative new products and services that can be used in the construction, maintenance, repair, replacement and management of gas distribution networks regularly appear on the market.
    Show
  • Kiwa product certificate for internally tinned copper tubes for drinking water installations.
    Show
  • As Kiwa  Turkey, we have prepared a series of training programs for the continuous improvement of effective performance management systems and practice to find out the full impact of the ISO 27001 everyone from beginners to professionals. In ...
    Show
  • JAS

    The JAS certificate opens the doors to the organic market in the Rising Sun Country.
    Show