-
Plastics piping systems for the transport of cold drinking water outside buildings can be certified with Kiwa Watermark to ensure quality. Kiwa quality statements under Kiwa evaluation guidelines BRL- K506, BRL- K522, BRL- K17101, BRL- K17102, BRL- K17104, BRL-K17105, BRL- K17301, BRL- K17401 and BRL- K17605.
Show
-
Certification and testing for hoses, shower heads, hand showers and other sanitary tapware components with the Kiwa Watermark. Covering Kiwa evaluation guidelines BRL- K622, BRL- 658, BRL- K668, BRL- K14025, BRL- K14026, BRL- K14034.
Show
-
The Ü-mark indicates the usability of a construction product in Germany according to national requirements which are not covered by CE marking.
Show
-
Waste macadams/tarmac need to be classified to the waste regime presently active in the UK.
Show
-
Kiwa CMT | We examine ground contamination
Show
-
Kiwa Gastec | Gas meter hire, sale and calibration
Show
-
Kiwa Gastec | Test Rig Sales
Show
-
Comprehensive materials testing for the design, construction and repair of highways
Show
-
Plastic piping products for drainage systems can be certified with the KOMO quality mark. KOMO quality statements under Kiwa assessment guidelines BRL- 1401, 1404, 1405, 1410, 1411 and 1412.
Show
-
Products like copper tubes, steel pipes and other products intended for safe transport of drinking water can be certified with the Kiwa Watermark quality mark. Evaluation guidelines in this scope are BRL- K760, BRL- K761, BRL- K762, BRL- K767, BRL- K771, BRL- K772, BRL- K775, BRL- K795, BRL- K10018, BRL- K1028, BRL- K19005.
Show
-
Certification of legionella prevention systems to prevent or reduce the growth of legionella bacteria in tap water installations. Kiwa Watermark assessment guidelines in this scope are BRL- 6010, BRL- K14010-1, BRL- K14010-2 and BRL- K14012.
Show
-
Kiwa has testing systems, to check all characteristics that may apply to the design, construction and management of roads, industrial sites and dike revetments. The tests focus on capturing of pavement surface data, recording of the structural condition, loads exerted on the construction and environmental aspects.
Show
-
Kiwa CMT | We perform CBR Testing at construction sites
Show
-
Kiwa CMT | Waste Soil and Waste Material (WM3 and WAC) Testing
Show
-
Kiwa Gastec | Non-destructive tank testing
Show
-
Kiwa Watertec | TMV thermostatic mixing valves testing and certification
Show
-
We measure electrical power usage during operation and standby on a range of products.
Show
-
Rubbers and adhesives for non-drinking water can be certified with the KOMO quality mark. KOMO quality statements under Kiwa evaluation guidelines BRL- 2013, BRL- 2020-1, BRL- 2020-2, BRL- 5220, BRL- 5221.
Show
-
Plastic piping products for sewerage systems can be certified with the KOMO quality mark. KOMO quality statements under Kiwa evaluation guidelines BRL- 2003, 2006, 2007, 2008, 2009, 2011, 2017, 2021, 2023, 2040, 2042, 2050, 5215, 5222, 5223, 9206, 9208-1, 52100, 52200, 52203, 52204, 52202.
Show
-
Certified and tested ceramic sanitary appliances guarantee quality and compliance to European standards and requirements in The Netherlands. Including BRL- K615, BRL- K616, BRL- K619, BRL- K620, BRL- K621.
Show