Our services

Kiwa provides a comprehensive range of services in quality, safety and sustainability. Explore our services, from certification and inspection to testing and training, supporting organizations worldwide in meeting standards and enhancing performance.

Filters
Service
Market
Services (588 results)
NIS2 in Europe
NIS2 European Cybersecurity Directive

Cybersecurity remains a hot topic, not only due to the increasing number of hacks and ransomware attacks but also from the perspective of regulators and the evolving legal framework in this area. European member states are currently preparing for the transposition of the Network and Information Security Directive 2 (NIS2) into national legislation.

Read more
Waterstof Awareness
E-learning Hydrogen Awareness

In the eyes of Kiwa, hydrogen plays a crucial role in the energy transition. But what is hydrogen? You'll discover it in the Kiwa’s e-learning Hydrogen Awareness, an introduction to hydrogen for anyone involved (or getting involved) with hydrogen.

Read more
Swimming pool - inside
Product certificate Kiwa NSF/ANSI/CAN 50 treatment chemicals swimming pools

Special treatment chemicals are often used to safeguard the quality of the water in swimming pools and hot tubs. These products must of course not lead to health risks. Manufacturers who want to demonstrate that their swimming pool chemicals have been tested and meet strict requirements can request a product certificate from Kiwa according to NSF/ANSI/CAN 50 'Equipment and chemicals for swimming pools, spas, hot tubs and other recreational water facilities'.

Read more
Rubber rings
Drinking Water Materials Testing – BS 6920

BS 6920 is a requirement for manufacturers and suppliers of non-metallic materials/products that are used in contact with drinking water.

Read more
Plastics Piping Systems Outside Buildings
Kiwa Watermark Certification and Testing for Plastics Piping Systems Outside Buildings

Plastics piping systems for the transport of cold drinking water outside buildings can be certified with Kiwa Watermark to ensure quality. Kiwa quality statements under Kiwa evaluation guidelines BRL- K506, BRL- K522, BRL- K17101, BRL- K17102, BRL- K17104, BRL-K17105, BRL- K17201, BRL- K17202, BRL- K17301, BRL- K17401 and BRL- K17605.

Read more
Sanitary Tapware Components and Accessories
Kiwa Watermark Certification and Testing for Sanitary Tapware Components & Accessories

Certification and testing for hoses, shower heads, hand showers and other sanitary tapware components with the Kiwa Watermark. Covering Kiwa evaluation guidelines BRL- K622, BRL- 658, BRL- K668, BRL- K14025, BRL- K14026, BRL- K14034.

Read more
Athletics: runners on the athletics track
Testing sport facilities in laboratory

Kiwa guarantees sustainable and safe sports facilities for many forms of sport. Kiwa conducts continuous research in our own laboratory. Before fields or facilities are tested on site, the products that are used to build sports surfaces are tested in the laboratory of Kiwa.

Read more
Digital cloud
ISO 27017 Information security for cloud services

Are you a provider or customer of cloud services? With certification against the international standard ISO 27017:21 you can demonstrate your stakeholders that you are aware of the security risks of storing and processing information in the cloud and that you have taken measures to minimise these risks.

Read more
Training & Education
Take the next step as internal auditor with the Lead Auditor Course (LAC)

The monitoring of a quality management system is headed by the lead auditor. This is an experienced auditor with advanced knowledge of the relevant standards and processes who masters the skills required to be a leader. You will learn these skills during the Lead Auditor Course (LAC) by Kiwa Training.

Read more
Skydivers in a circle
Domestic Water Safety

The quality of our drinking water is a matter that concerns us all. To prevent the pollution of drinking water it is essential for appliances (such as washing machines and dishwaters) to have internal backflow protection.  With the Kiwa Domes...

Read more
Skydivers in a circle
BRL-K656: Heat exchangers intended for the indirect adjustment of drinking water

The products are intended to be used in in hot water installations with a working pressure of maximum.1 MPa (10 bar) and a water temperature of maximum 90 °C.

Read more
Skydivers in a circle
BRL K536-G Plastic piping systems of PE-RT/Al for hot and cold drinking water

The products according BRL K536 G are applicable for piping systems distribution systems for hot and cold drinking water at a design (working) overpressure of 8 or 10 bar according the temperature profile table 1.

Read more
Skydivers in a circle
Deze BRL is per 1 maart 2019 ingetrokken en ondergebracht in BRL-K767.

Deze BRL is per 1 maart 2019 ingetrokken en ondergebracht in BRL-K767.

Read more
Skydivers in a circle
Shower hoses for sanitary tapware (BRL-K668)

The shower hoses may be used in tap water installations with a maximum working pressure of 1000 kPa. The recommended limits for correct operation are a dynamic pressure between 100 kPa and 500 kPa and a water temperature of maximum 65°C. Occasiona...

Read more
PVC pipes
BRL 5221 Adhesives for joints in plastics piping systems for sewerage inside buildings

KOMO® product certificate for adhesives for joints in plastics piping systems for sewerage inside buildings - BRL 5221

Read more
Training & Education
Internal Audit ISO 9001 training

Kiwa Training organises the two-day course ‘Internal Audit in accordance with ISO 9001’. After taking this course, you will be able to prepare, perform, report and follow up on audits yourself.

Read more
Plastic pipes
Self-closing gas valves

Self-closing gas valves AR 168

Read more
Bar installation
Flexible hose assemblies

This approval requirement describes the requirements with regard to flexible hose assemblies for use in installations for natural gas with a pressure of no more than 200 mbar in accordance with the NPR 3378-11 Code of Practice

Read more
Pipe connection
Plastics piping systems for the supply of gaseous fuels – Polyethylene (PE) – Fittings

This approval requirement specify the requirements for fusion fittings made of polyethylene (PE) as well as of mechanical fittings for use in plastic piping systems for the supply of gaseous fuels of the 2nd and 3rd family according to EN 437 with a maximum operating pressure of 10 bar at a reference temperature of 20°C. The operating temperature is between -20 ˚C and 40 ˚C.

Read more
Gas installation
Gas pressure regulators, gas leak protectors and combination regulators

The products are intended to be used as gas pressure regulators, gas leak protectors and gas pressure regulators combined with gas leak protectors for domestic installations with a capacity up to 10 m3 and an inlet pressure (MOPu) up to 200 mbar a...

Read more
Plastic pipes
Polyethylene (PE) valves for plastic piping systems for the supply of gaseous fuels

Polyethylene (PE) valves for plastic piping systems for the supply of gaseous fuels AR 136

Read more
Water flow
Steel pipes for the transport of drinking water (BRL-K762)

The products are intended to be used for the transport of drinking water and a working pressure of 1MPa (1,000 kPa), with a water temperature up to 65˚C and a maximum water temperature up to 90˚C for a period of maximum 1 hour.

Read more
Tree in a green landscape
WEEELABEX (Waste of Electric and Electronic Equipment Label of Excellence)

The WEEELABEX quality standard describes the working method for the treatment and processing of discarded electrical and electronic equipment. The acronym WEEELABEX stands for Waste of Electric and Electronic Equipment Label of Excellence.

Read more
Growing peppers
Grower visits

Growers, growers associations and trading companies that ship their products directly from growers can use Kiwa AQS once or periodically to monitor the quality of fresh produce. As an independent third party, Kiwa AQS can also rule on conflicts between growers and buyers.

Read more