Fire, Safety and Security

The EN 50130-5 European Standard specifies environmental test methods to be used for testing the system components of the following (fire) alarm systems, intended for use in and around buildings in residential, commercial, light industrial and ind...

The EN 54-2 is applicable for Control and Indicating Equipment (CIE) used in a fire detection and fire alarm system. A fire detection and fire alarm system that communicate for the purpose of detecting fire at the earliest practicable moment, and ...

ISO 37001 Anti-bribery Management Systems Certification with Kiwa: prevent, detect and address bribery to build trust in your brand and boost your business.

The T 031 consists of the general requirements for testing security products including its requirements of the EN 50131. This technical note is intended to check the requirements of the EN 50131 series completely and in this technical note additio...

The EN 50136-2 standard is applicable for Supervised Premises Transciever . This European Standard specifies the general equipment requirements for the performance, reliability, resilience, security and safety characteristics of supervised premise...

The Alarm Components Scheme certifies that a electronical security product complies with the technical product standards, needed for market access in various countries inside the European Union. The Alarm Components Scheme also proofs that the per...

EMAS certification with Kiwa: reduce your environmental impacts, engage employees and boost your reputation.

Renowned testing, inspection and certification expert Kiwa introduces Total Information Security Control (TISC), a new integral ICT security tool covering the full spectrum of data and internet of things.

The EN 50131-5-3 standard applies to intrusion alarm equipment using radio frequency (RF) links and located on protected premises. The EN 50131-5-3 standard defines the terms used in the field of intrusion alarm equipment using radio frequency lin...

The EN 54 series applies to fire detection and fire alarm systems in and around buildings composed of several components that communicate for the purpose of detecting fire at the earliest practicable moment.

Product certification (CertAlarm)

Hose reels with semi-rigid hose have been designed for fire fighting purposes and can be connected to drinking waterinstallations with a maximum waterpressure of 1000 kPa and a watertemperature of maximum 30°C.

ISO 14001 Environmental Management Certification with Kiwa: reduce waste, gain customer trust and be competitive.

Products used for gas distribution and installation materials have to meet high standards.

ISO 9001 Quality Management Systems Certification with Kiwa: improve your performance, meet customers’ needs and increase your profit.

The EN 50131-2-2 standard is applicable for passive infrared detectors. This product will be used as part of intrusion alarm systems installed in buildings. The main standard is the EN 50131-2-2 for wired devices and for wireless devices the additional standard EN 50131-5-3 is required

The purpose of a voice alarm loudspeaker as a component of a voice alarm system is to provide intelligible warning to person(s) within, or in the vicinity of, a building in which a fire emergency has occurred and to enable such person(s) to take a...

VCA, VCO and VCU health, safety and environment certification with Kiwa: create safe working conditions for contractors and reduce accidents.

The EN 50131-4 standard is applicable for Warning devices. This is a device that gives an audible alarm in response to a notification warning device and may also provide alert indications. These products will be used for notification in intrusion ...

The EN 50131-6 standard is applicable for power supplies. This product will be used as part of intrusion alarm systems installed in buildings. The power supply shall either be an integral part of an intrusion alarm system component or stand-alone....