Services

  • Energy meters are a crucial component in distribution networks for gas and heat. Based on its specific knowledge in the field of gas and heat measurement, Kiwa Technology will be delighted to advise you on purchasing and applying these energy meters.
    Show
  • Cathodic protection (CB) is the ideal method for guarding pipelines and storage tanks against corrosion. However, the application of CB requires specialist knowledge, especially in extraordinary situations or when repairing breakdowns.
    Show
  • Internal coatings of steel tanks in accordance with the requirements of BRL-K779 are suitable for the storage of fuels according to the PGS-Class 1, Class 2 or Class 3 with a storage temperature between -20C to + 40C. In addition to the pure mineral fuels these coatings are also
    Show
  • IRENE Pro is more than a gas network calculation program. It is an analysis tool for designing gas networks, performing network calculations and determining the level of risk or delivery reliability.
    Show
  • ISO 14001 Environmental Management Certification with Kiwa: reduce waste, gain customer trust and be competitive.
    Show
  • Gas meters and EVCs that are used in the Netherlands for accounting purposes for consumers that annually purchase 170,000 m3n or less are subject to the Dutch Weights and Measures Act (Metrologiewet).
    Show
  • Stationary, atmospheric, welded, single or double walled thermoplastic tanks are widely used for the above ground storage of chemicals. The BRL-K21009 requirements are based on the requirements of the DVS 2205-1 to DVS 2205-5 standards. The BRL-K21009 also stipulates the requirements for the spill containers.
    Show
  • The independent investigation of incidents enables them to be used objectively as lessons to be learnt for the future. By learning from incidents, the correct measures can be taken to reduce these. For gas network operators in the Netherlands, Kiwa Technology provides a call-out service that can be reached 24/7.
    Show
  • Organizing emergency drills allows network companies to assess and demonstrate that the organisation is ready and capable of handling a breakdown or emergency effectively. An emergency drill should be organised based on the emergency manual, with great attention being paid to preparation, execution and evaluation.
    Show
  • PAS 55 - In the process leading to the certification, Kiwa can create added value on many different levels. In this way, Kiwa Technology can offer excellent support with consultancy in the setting-up of the necessary processes and systems
    Show
  • The added value of Risk Based Asset Management (e.g. according to PAS55 or NTA 8120) can be broken down into a number of internal and external benefits.
    Show
  • ISO 37001 Anti-bribery Management Systems Certification with Kiwa: prevent, detect and address bribery to build trust in your brand and boost your business.
    Show
  • Initial evaluation
    Show
  • Coatings certified to the requirements of BRL-K768 are suitable for the external protection of underground steel tanks, pipes and fittings. Tanks protected with these coatings can be installed in areas with a high ground water table. Also, tthese coatings can be used in combination with a cathodic protection system.
    Show
  • Paint systems certified to the requirements of BRL-K21012 are suitable for the external protection of above ground steel tanksTanks protected with these coatings can be installed in all areas with a corrosion category from C2 to C5-I/M as defined in ISO 12944-2.
    Show
  • Network design for new areas or minor adjustments to existing networks is a determinant factor in the relationship between your investment costs and delivery reliability. You don't want to lay a large amount of pipeline capacity unnecessarily, but you do want to build in sufficient redundancy.
    Show
  • Products used for gas distribution and installation materials have to meet high standards.
    Show
  • PE/GRP sumps for underground fuel storage tanks, manifold chambers and dispenser sumps (BRL-K21006-02)
    Show
  • Problems in pipelines are often caused by the joints. Kiwa Technology has built up vast experience. For example, we have used our expertise in the area of plastic welding (of PE, PEX, PA, PP etc.) and other jointing techniques for years to support our consultancy regarding research and development projects.
    Show
  • If you want to carry out inspections or repairs of production lines or if you want to build or rebuild facilities or if you want to lease personnel for these activities you need to demonstrate a high safety standard as clients want to reduce the safe...
    Show